Holtkoetter VL100ES User Manual

ASSEMBLY INSTRUCTIONS FOR

205 Hardman Avenue South, South Saint Paul, MN 55075

Voice: [phone] • Fax: [phone]

e-mail: [e-mail]

www.holtkoetter.com

Congratulations, you have purchased one of the finest energy-efficient reading lamps
available on the market today. The Volkslampe VL100 Table Lamp comes packaged

in two boxes, including:

Fixture Box:

1. Table lamp base

2. 2x Energy Star® rated compact fluorescent bulbs (120V/18W-GU24),

manufactured by Westinghouse. Order Code: 9250*018-GU24

Shade Box:

3. Fabric shade

4. Frosted glass shield

5. White mesh diffuser

D

J
B

Assemble Volkslampe VL100

1. Unscrew the two white nuts G located near the
socket assembly and remove the plastic washers

F

.

2. Place the frosted glass shield J, smooth side
down, over the socket assembly. To secure the
glass shield, place a washer F over each stem
and screw the two white nuts G back in place.
Do not overtighten.

3. Install the two compact fluorescent bulbs E.
Push and turn the bulbs into the sockets.

4. Unscrew the finished knob A located at the
top of the center stem H. Remove one of the
plastic washers C.

5. Place the fabric shade D onto the center stem,
followed by the plastic washer C and the white
mesh diffuser B.

6. Tighten the finished knob A on the center stem
to secure the fabric shade D and white mesh
diffuser B. Your lamp is now operational.

E

G

A

B

C

D

F

H

J

Volkslampe Table Lamp

No. VL100

Care Instructions

Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be

used to spot clean. Do not use common household cleaners on lamps or fixtures, as

the lacquer on the outside of the brass may be damaged as a result. Enjoy your new
Holtkötter lamp.

Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.

Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN.

Holtkötter ® and Holtkötter Leuchten® are registered trademarks of Holtkötter. All Rights Reserved.

© Holtkötter