ASSEMBLY INSTRUCTIONS FOR
205 Hardman Avenue South, South Saint Paul, MN 55075
Voice: (800) 899-5444 • Fax: (888) 552-8661
e-mail: customerservice@holtkoetter.com
www.holtkoetter.com
This low-voltage LED oor lamp comes fully assembled.
Technical Specifications
Light Engine: Holtkötter PC Board LED 11-8
with 8x CREE XP-G LEDs
Optic / Reector: Holtkötter Aluminum Reector
ø 134x100 with 60˚ x 5mm Optics
Light Output: 1120 Lumens equivalent to 80 W Halogen
Light Color: 2900 Kelvin
Control/LED Driver/Dimmer: Holtkötter LED Dimmer with
full-range dimming of < 1% - 100%
Maximum Current/Voltage: 1000mA & 18V
System Power Consumption: 2 . . .12 Watt
Bernie Turbo Series Floor Lamp
No. 6470*LED
Detail of LED Reector
Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH. Final assembly by Holtkötter in South Saint Paul, MN.
Care Instructions
Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to
spot clean. Do not use common household cleaners on lamps or xtures, as the lacquer
on the outside of the brass may be damaged as a result.
Holtkötter ® and Holtkötter Leuchten® are registered trademarks of Holtkötter. All Rights Reserved.
© Holtkötter
Loading...