![](/html/a6/a6b9/a6b955c8a6555b71971a75f68731cdc20f109d8bae4ddac2dd3a139d03dd479c/bg1.png)
ASSEMBLY INSTRUCTIONS FOR
205 Hardman Avenue South, South Saint Paul, MN 55075
Voice: (800) 899-5444 • Fax: (888) 552-8661
e-mail: customerservice@holtkoetter.com
www.holtkoetter.com
This low-voltage LED chairside reading lamp comes fully assembled. Equipped with a Side-Line
Dimmer.
Technical Specifications
Light Engine:
Optic / Reflector:
Light Output:
Light Color:
Control/LED Driver/Dimmer:
Maximum Current/Voltage:
System Power Consumption:
Holtkötter PC Board LED 11-8 with 8x CREE XP-G LEDs
Holtkötter Aluminum Reflector ø 134x100 with 60˚ x 5mm
Optics
1120 Lumens equivalent to 80 W Halogen
2900 Kelvin
Holtkötter LED Dimmer with full-range dimming of < 1% -
100%
1000mA & 18V
2 . . .12 Watt
Care Instructions
Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be used to spot
clean. Do not use common household cleaners on lamps or fixtures, as the lacquer on the
outside of the brass may be damaged as a result.
LED Chairside Reading Lamp with
Sideline Dimmer No. 6317*LED SLD
Detail of LED Reflector
Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.
Final assembly by Holtkötter in South Saint Paul, MN.
Holtkötter ® and Holtkötter Leuchten® are registered trademarks of Holtkötter. All Rights Reserved.
© Holtkötter