Holtkoetter 6263 User Manual

ASSEMBLY INSTRUCTIONS FOR

205 Hardman Avenue South, South Saint Paul, MN 55075

Voice: [phone] • Fax: [phone]

e-mail: [e-mail]

www.holtkoetter.com

Your table lamp will come in two boxes, one for the shade and one for the base.

Assemble the Table Lamp

1. Install the shade.

2. Unscrew the metal ring located on the socket of the lamp.

3. Place the shade over the center stem.

4. Screw the metal ring back into place and tighten handtight.

5. Install the bulb of your choice (not included).

Regular Shade: maximum Wattage: 100 Watts, Medium Edison Base.

Narrow Shade: maximum Wattage: 75 Watts, Medium Edison Base.

6. Your lamp is now operational.

Fabric Shaded Table Lamp

No. 6263

Major lamp parts manufactured in Germany by Holtkötter Leuchten GmbH.

Bulbs not included. Final assembly by Holtkötter in South Saint Paul, MN.

Care Instructions

Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth can be

used to spot clean. Do not use common household cleaners on lamps or fixtures, as

the lacquer on the outside of the brass may be damaged as a result. Enjoy your new
Holtkötter lamp.

Holtkötter ® and Holtkötter Leuchten® are registered trademarks of Holtkötter. All Rights Reserved.

© Holtkötter