Holtkoetter 2969ES User Manual

HOLTKÖTTER INTERNATIONAL, INC.

155 Hardman Avenue South, South St. Paul, MN 55075

ASSEMBLY INSTRUCTIONS FOR

fax: [phone] • phone: [phone]

www.holtkoetter.com

e-mail: [e-mail]

Please make sure that the following parts for your fixture are enclosed.

A. Fixture including 1 x 13 W/120 V compact

fluorescent bulb, Order Code: 9250*013-GU24

B. Glass

This fixture comes completely assembled. After installation, you will need
to install the glass.

IT IS FIRMLY RECOMMENDED THAT A LICENSED ELECTRICIAN INSTALL THIS FIXTURE.

This producT musT be insTalled in accordance wiTh The applicable
insTallaTion code by a person familiar wiTh The consTrucTion and
operaTion of The producT and The hazards involved.

Installation Instructions

1. Remove the universal crossbar strap from the back of the sconce.

Energy Saver Wall Sconce

No. 2969/1*ES

2. Connect the wires from the sconce with the wires in the outlet
box according to generally accepted electrical standards.

3. Mount the crossbar strap to the outlet box after making the wire
connections.

4. Mount the fixture to the crossbar strap.

5. Install the glass in the finished ring brackets.

6. Your wall sconce is now operational.

Major xture parts manufactured in Germany by Holtkötter Leuchten GmbH.
Bulbs manufactured in Germany by Osram GmbH.
Final assembly by Holtkötter International, Inc. in South St. Paul, MN.

Care Instructions

Use only a soft, dry cloth to clean. If necessary, a slightly damp, soft cloth
can be used to spot clean. Do not use common household cleaners
on lamps or fixtures, as the lacquer on the outside of the brass may be
damaged as a result. Enjoy your new Holtkötter lamp.

Holtkötter ® and Holtkötter Leuchten® are registered trademarks

of Holtkötter International, Inc. All Rights Reserved.

© Holtkötter International, Inc.