Note: Part numbers including ²C² are mask version devices while ²R² are OTP devices.
2.2V~5.5V400kHz~8MHz
2.2V~5.5V400kHz~8MHz
System
Clock
Program
Memory
0.5K´1432´8
1K´1464´8
Data
Memory
I/O
13111
13111
8-bit
Timer
I/O Type MCU Series
Part No.VDD
HT48R10A-1
HT48C10-1
HT48R30A-1
HT48C30-1
HT48R50A-1
HT48C50-1
HT48R70A-1
HT48C70-1
Note: 1. Part numbers including ²C² are mask version devices while ²R² are OTP devices.
2. RTC is available when internal RC oscillator is selected as system clock.
2.2V~5.5V400kHz~8MHz
2.2V~5.5V400kHz~8MHz
2.2V~5.5V400kHz~8MHz
2.2V~5.5V400kHz~8MHz
System
Clock
Program
Memory
1K´1464´8
2K´1496´8
4K´15160´8
8K´16224´8
Memory
Data
I/O
211
251
3511
56
TimerInterrupt
8-bit 16-bit RTCExt.Int.
¾Ö
¾Ö
2
¾
LCD Type MCU Series
Part No.VDD
HT49R30A-1
HT49C30-1
HT49C30L1.2V~2.2V
HT49R50A-1
HT49C50-1
HT49C50L1.2V~2.2V
HT49R70A-1
HT49C70-1
HT49C70L1.2V~2.2V
Note: 1. Part numbers including ²C² are mask version devices, ²R² are OTP devices, while part numbers suffixed with ²L² are low voltage mask version devices.
2. For the low voltage mask version devices, note that the HT49R30A-1, HT49R50A-1 and HT49R70A-1 devices can be used as corresponding OTP devices.
2.2V~5.5V
2.2V~5.5V
2.2V~5.5V
System
Clock
400kHz~8MHz
or 32768Hz
400kHz~500kHz
or 32768Hz
400kHz~8MHz
or 32768Hz
400kHz~500kHz
or 32768Hz
400kHz~8MHz
or 32768Hz
400kHz~500kHz
or 32768Hz
Program
Memory
2K´1496´8
4K´15160´8
8K´16224´8
Memory
Data
I/OLCD
18´4
14
or
19x3
32´4
20
or
33´3
40´4
24
or
41´3
8-bit 16-bit RTCExt.Int.
1
2
11
Interrupt
Ext.Int.
11
11
12
Ö
12
Ö
TimerInterrupt
¾Ö
¾Ö
Ö
PFDStackPackage
23
24
24
Ö
Ö
PFDStackPackage
Ö
Ö
Ö
Ö
2
2
424SKDIP/SOP
24SKDIP/SOP,
4
28SKDIP/SOP
28SKDIP/SOP,
6
16
PFD Stack Package
448SSOP
Ö
6
Ö
16100QFP
Ö
16SSOP,
18DIP/SOP
16SSOP,
18DIP/SOP
48SSOP
48SSOP,
64QFP
48SSOP,
100QFP
A/D Type MCU Series
Part No.VDD
HT46R47
HT46C47
HT46R22
HT46C22
HT46R23
HT46C23
HT46R24
HT46C24
Note: Part numbers including ²C² are mask version devices while ²R² are OTP devices.
Note: Part numbers including ²C² are mask version devices while ²R² are OTP devices.
2.2V~
5.5V
2.2V~
5.5V
2.2V~
5.5V
2.2V~
5.5V
System
Clock
400kHz~8MHz
or 32768Hz
400kHz~8MHz
400kHz~8MHz
or 32768Hz
400kHz~8MHz
or 32768Hz
Program
Memory
2K´1488´8
4K´15208´8
4K´15192´8
8K´16384´8
Memory
Data
I/OLCD
19´4or
20
20´3
19´4or
32
20´3
32´4or
24
33´3
40´4or
24
41´3
R-F Type MCU Series
Part No.VDD
HT47C10L1.2V~2.2V32kHz
HT47R20A-1
HT47C20-1
HT47C20L1.2V~2.2V32768Hz
Note: 1. Part numbers including ²C² are mask version devices, ²R² are OTP devices, while part numbers suffixed with ²L² are low voltage mask version devices.
2.2V~5.5V 400kHz~8MHz
2. For the low voltage mask version devices, note that the HT47R20A-1 device can be used as corresponding OTP devices.
System
Clock
Program
Memory
1K´1632´8
2K´1664´8
Memory
Data
I/OLCD
8
12
TimerInterrupt
8-bit 16-bit RTC Ext.Int.
1
¾Ö
1
¾
11
2
¾
TimerInterrupt
16-bit RTC Ext.Int.
1
9´4
19´4
or
1
20´3
24
24
Ö
25
Ö
25
Ö
¾¾
132ch
Ö
A/DPWM PFD Stack Package
9-bit´6ch 8-bit´3Ö
8-bit´8ch 8-bit´4¾
10-bit´8ch 8-bit´4Ö
10-bit´8ch 8-bit´4Ö
IR
R-F
21ch
Carrier
PFDStackPackage
¾¾
Ö
¾
Ö
656SSOP
8
8
16
244QFP
464QFP
56SSOP,
100QFP
56SSOP,
100QFP
56SSOP,
100QFP
Remote Type MCU Series
Part No.VDD
HT48RA0A
HT48CA0
HT48CA61.8V~3.6V 400kHz~4MHz
HT48RA3
HT48CA3
Note: 1. Part numbers including ²C² are mask version devices while ²R² are OTP devices.
2.2V~3.6V 400kHz~4MHz
2.2V~3.6V 400kHz~4MHz
2. For HT48CA6, OTP MCUs (HT48RA0A) are available for product development and verification purposes.
System
Clock
Program
Memory
1K´1432´8
1K´1432´8
24K´16224´8
Data
Memory
I/O
16
16
231112
TimerInterrupt
8-bit16-bitExt.Int.
¾¾¾¾ Ö ¾
¾¾¾¾ Ö ¾
Phone Controller MCU Series
Part No.VDD
HT95A100
HT95A10P
HT95A200
HT95A20P
HT95A300
HT95A30P
HT95A400*
HT95A40P*
HT95L000
HT95L00P
HT95L100
HT95L10P
HT95L200
HT95L20P
HT95L300
HT95L30P
HT95L400*
HT95L40P*
HT95C200
HT95C20P
HT95C300
HT95C30P
HT95C400*
HT95C40P*
* Under development, available in 1Q, 2004.
Note: 1. Part numbers including ²A² are I/O type devices, ²L² are LCD type devices, while ²C² are LCD with CID type devices.
2.4V~5.5V
2.4V~5.5V
2.4V~5.5V
2.4V~5.5V
2.4V~5.5V
2.4V~5.5V
2.4V~5.5V
2.4V~5.5V
2.4V~5.5V
2.4V~5.5V
2.4V~5.5V
2.4V~5.5V
2. Part numbers suffixed with ²P² are OTP devices, all others are mask version devices.
Note: 1. All listed devices are mask version MCUs.
2. OTP version MCUs are available for product development and verification purposes.
System
Clock
Program
Memory
8K´16192´8¾
16K´16192´8¾
32K´16384´8¾
64K´162.3K´8¾
64K´162.3K´8384K´8
Data
Memory
Data
ROM
I/OLCD
8~12
8~12
15
40´16~
15~39
80´16~
16~40
16´8~
20´8
33´8~
40´8
40´16
64´16
64´32
Data Bank MCU Series
Part No.VDDProgram MemoryData MemoryI/O Max.LCD Max.Package
HT23B20*
HT23B20R*
HT23B20L*
HT23B40*
HT23B40R*
HT23B40L*
HT23B60
HT23B60R*
HT23B60L*
* Under development, available in 1Q, 2004.
Note: 1. Part numbers suffixed with ²0² are mask version devices, ²R² are OTP devices, while part numbers suffixed with ²L² are low voltage mask version devices.
2. For the low voltage mask version devices, note that the HT23B20R, HT23B40R and HT23B60R devices can be used as corresponding OTP devices.
2.4V~3.6V
1.2V~2.2V
2.4V~3.6V
1.2V~2.2V
2.4V~3.6V
1.2V~2.2V
8K´16512´8
16K´161K´8
32K´162.3K´8
TimerInterrupt
8-bit 16-bit RTC Ext.Int.
1
¾
21
22
22
22
26
28
30
13PWM8100QFP
Ö
14PWM8100QFP
Ö
16
Ö
16
Ö
16
Ö
32´8
40´8
60´11
D/AStack Package
DAC,
PWM
DAC,
PWM
DAC,
PWM
8100QFP
8128QFP
8160QFP
64QFP
100QFP
100QFP
Voice MCU Series
Part No.VDD
HT860722.4V~5.2V
HT861442.4V~5.2V
HT861922.4V~5.2V
HT863842.4V~5.2V
HT865762.4V~5.2V
HT867682.4V~5.2V
Note: 1. All listed devices are mask version MCUs.
2. Evaluation kits are available for product development and verification purposes, please contact us for further information.
The following gives details behind the range of programming equipment available to program the full range of Holtek
Microcontroller based devices.
HT-IDE3000 Development Environment
The HT-IDE3000 is a fully integrated development system designed around the Holtek range of microcontrollers. Working in
conjunction with the HT-ICE hardware emulator, the HT-IDE3000 system provides a user friendly workbench to ease the process
of application program development, by integrating all of the software tools, such as editor, cross assembler, linker, library and
symbolic debuggers. More detailed information on the HT-IDE3000 development system is contained within the HT-IDE3000
User¢s Guide. Installed in conjunction with the HT-IDE3000 and to ensure that the development system contains information on
new microcontrollers and software updates, Holtek provides regular HT-IDE3000 Service Packs. These Service Packs do not
replace the HT-IDE3000 but are installed after the HT-IDE3000 system software has been installed.
HT-ICE ¾ Holtek In-Circuit Emulator
Developed alongside the Holtek 8-bit microcontroller device range, the Holtek ICE is a fully functional in-circuit emulator for
Holtek's 8-bit microcontroller devices. Incorporated within the system are a comprehensive set of hardware and software tools
for rapid and easy development of user applications. Central to the system is the in-circuit hardware emulator, capable of emulat
ing all of Holtek's 8-bit devices in real-time, while also providing a range of powerful debugging and trace facilities. Regarding
software functions, the system incorporates a user-friendly windows based workbench which integrates together functions such
as program editor, cross assembler, linker and library manager. In addition, the system is capable of running in software simula
tion mode without connection to the HT-ICE hardware.
-
-
HT-ICE ¾ Holtek In-Circuit Emulator
Product CodeIC TypeIC Part No.Product Contents
Cost-Effective I/O Type HT48R05A-1, HT48C05, HT48R06A-1, HT48C06HT-ICE, CD, 4 Flat Cables, Power Adapter, Power Cord,
CICE48C00CCF
CICE49C00CCAALCD Type
CICE46C0CCEA
TICE47C-CCDA
TICE47C100000AHT47C10L
TICE95-CCFXPhone Controller Type
TICEG2190-CCAA Dot Matrix LCD Type
TICE86SER0000A
TICE82K680000AKeyboard/Mouse Type HT82K68E, HT82K68A
TICE82K960000AKeyboard/Mouse Type HT82K96E, HT82K96A
The interface cards supplied with the HT-ICE can be used for most applications, however, it is possible for the user to omit the
supplied interface card and design their own interface card. By including the necessary interface circuitry on their own interface
card, the user has a means of directly connecting their target boards to the CN1 and CN2 connectors of the HT-ICE.
The following list gives the information to enable the correct flat cable connection between the range of microcontroller packages
and the appropriate interface card and socket. Please note that the Interface Card accompanying each HT-ICE model is packed
with other accessories in the same HT-ICE carton. Users need not purchase extra Interface Cards.
The Holtek OTP programmers are supplied to enable efficient programming of OTP devices for engineering or low to medium
volume production. The HandyWriter is able to run either by connecting to the PC through its printer port or to the HT-ICE directly
without the printer port connection, however it is not able to run in stand alone mode. In the other hand, the new HT-Writer is able
to run either by connecting to the PC through its RS-232 serial port or to operate stand alone without connecting to PC. Please
note if the device to be programmed does not fit the on board Textool, an extra Adapter Card is needed to accommodate the de
vice package form. Related information is listed as follows.
OTP Programmer
Product CodeProduct CodeProduct Contents
HT-WriterCOTPWRITER00AHT-Writer (with 40pin DIP textool), CD, Power Adapter, RS-232 Cable
HandyWriter
THANDYOTP-FHandyWriter (with 40pin DIP textool), CD, Power Adapter, Printer Cable
The Holtek OTP programmers are supplied with a standard Textool chip socket. The OTP Adapter Card is used to connect the
Holtek OTP programmers to the various sizes of available OTP chip packages that are unable to use this supplied socket. The
following table will enable the user to select the required adapter card for their various applications.
OTP Adapter Card
Product CodeIC Part No.Product Contents
TSOP2DIP28All except HT48RA0AOTP adapter for OTP chips with SOP package, 28pin and below
TNSSOP2DIP28HT48R05A-1, HT48R06A-1OTP adapter for SSOP package, 28pin and below
TADP48R50ASO48
TADP48R70AQF64HT48R70A-1OTP adapter for HT48R70A-1 64QFP package
T49R50QFP100-BHT49R50A-1, HT49R70A-1OTP adapter with a 100QFP textool
TADP4649RSS56A
TADP46R63SS56AHT46R63OTP adapter for HT46R63 56SSOP package
TADP46R63QF100HT46R63OTP adapter for HT46R63 100QFP package
TADP4649SQF10AHT46R64, HT46R65OTP adapter for HT46R64, HT46R65 100QFP package
T47R20QFP64HT47R20A-1OTP adapter for HT47R20A-1 64QFP package
T48RA0DIPSOP-AHT48RA0AOTP adapter with a DIP textool and a SOP textool
TADP95A10SO28AHT95A10POTP adapter for HT95A10P 28SOP package
TADP95AX0PSS48HT95A20P, HT95A30POTP adapter for HT95A20P, HT95A30P 48SSOP package
TADP95L10PQF64HT95A40P, HT95L10POTP adapter for HT95A40P, HT95L10P 64QFP package
TADP95L00PSS56HT95L00POTP adapter for HT95L00P 56SSOP package
TADP95LX0PQF100 HT95L20P, HT95L30POTP adapter for HT95L20P, HT95L30P 100QFP package
By referring to the applicable Holtek MCU part number this table provides users with a means to quickly locate the relevant de
velopment tools and OTP programming tools required. In instances where tools are not listed for specific devices, this infers that
such tools are not required.
Note that in the following indexing tables, any HT-ICE with part number CICE46C0CCEA, CICE48C00CCF and
CICE49C00CCAA, denote the new versions of the HT-ICE. Their corresponding old version part numbers are respectively,
TICE46SER0000B, TICE48SER0000A and TICE49C-CCAA. The OTP writer, with the part number COTPWRITER00A, is
known as the HT-Writer and is the new version of the OTP writer. The old version, known as the HandyWriter, has the part num
ber, THANDYOTP-F. Since the new version of the HT-ICE has an integrated OTP writer on board, it is not required to obtain an
extra OTPwriter. As the older version of the HT-ICE does not have an integrated OTP writer, it requires a separate OTP writer for
programming.
MCU Tools Indexing Table
IC Part No.Package TypeHT-ICEI/O Interface CardOTP Writer (& Adapter)Hi-Lo Writer (& Adapter)
7th Floor, Building 2, No.889, Yi Shan Road, Shanghai, China
Holtek Semiconductor (Hong Kong) Ltd.
Block A, 3/F, Tin On Industrial Building, 777-779 Cheung Sha Wan Rd., Kowloon, Hong Kong
46712 Fremont Blvd., Fremont, CA 94538
Tel:886-3-563-1999
Fax:886-3-563-1189
Tel:886-2-2655-7070
Fax:886-2-2655-7373
Tel:021-6485-5560
Fax:021-6485-0313
Tel:852-2-745-8288
Fax:852-2-742-8657
Holmate Semiconductor, Inc.
Tel:510-252-9880
Fax:510-252-9885
Holtek Semiconductor assumes no responsibility for errors or omissions in this Selection Guide. THESE MATERIALS ARE PROVIDED "AS
IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED. Holtek further does not warrant the accuracy and indirect,
incidental or consequential damages, including without limitation, lost revenues or lost profits, which may result from use of these materials.
Holtek's products are not authorized for use as critical components in life support devices or systems. Holtek may make changes to these
materials, or to the products described therein, at any time without notice. Holtek makes no commitment to update the information contained
herein. For the most up-to-date information, Please visit our web site at http://www.holtek.com.tw
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.