Holmes HTF3609A Owner's Manual

WARRANTY INFORMATION
PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS
Owner’s Guide
HTF3609A
WARRANTY INFORMATION
Oscillating Pedestal
Tower Fan
3 YEAR LIMITED WARRANTY
What are the limits on JCS’s Liability?
JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty. JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise. JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party. Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.
How to Obtain Warranty Service
In the U.S.A. If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-546-563
7
and a convenient service center address will be provided to you. In Canada
If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-546-
5637
and a convenient service center address will be provided to you.
138901 HTF3609A09EM1 Printed In China
© 2009 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at 20B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any other problem or claim in connection with this product, please write our Consumer Service Department. PLEASE DO
NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.
GCDS-HOL15237-JL
HTF3609A_09EM1.indd 1HTF3609A_09EM1.indd 1 10/23/09 9:03:54 AM10/23/09 9:03:54 AM
PLEASE READ AND SAVE THESE
IMPORTANT SAFETY INSTRUCTIONS
FEATURES - OPERATIONS
CLEANING/MAINTENANCE INSTRUCTIONS
Follow these instructions to correctly and safely care for your Tower Fan. Please remember:
• Always unplug the fan before cleaning.
• Clean the fan with a soft cloth moistened with a mild soap solution.
• Do not allow water to drip on or into the fan motor housing.
• Do not use any of the following as a cleaner: gasoline, thinner, benzene.
• You may also clean the front grill of the fan by lightly running a vacuum cleaner nozzle over the grill surface.
FAN STORAGE
In the off-season, it is important to keep your fan in a safe, dry location.
• We recommend using the original (or appropriately sized) box.
• Please remember to protect the fan from dust or moisture.
ASSEMBLY INSTRUCTIONS
Assembly Time: 10-15 minutes. Tools Required: Phillips head screw driver. NOTE: MAKE SURE YOU REMOVE ALL CONTENTS FROM
THE PACKAGE. PLEASE CHECK PACKAGING MATERIALS FOR PARTS THAT COULD BE REQUIRED TO OPERATE YOUR FAN.
1. Assemble column halves around Power Cord (I). To assemble the column, simply snap the two halves together.
2. Secure assembled Column (E) to Fan Housing (J) with 4 Screws (F) See Figure 1 for proper alignment of assembled Column and Motor Housing.
3. Assemble Base Halves (G, H) around Power Cord (I). To secure Base Halves together, slide the posts of one base half into the slots of the second base half.
4.
Use the Locator Tab (K) to align base assembly to column and secure with 4 Screws (F). Refer to Figure 1.
5. Secure Power Cord (I) per Figure 3, 4.
OPERATING INSTRUCTIONS (SEE FIG. 2)
A. Power/Speed Settings Press
= On, I, II, III, Off B. Timer Control Press
= Turns Off in 1, 2, 4, 8 hours C. Oscillation Control Press
= Oscillation On, Off D. Natural Breeze, Sleep Breeze Modes Press
= Natural Breeze, Sleep Breeze
Natural Breeze Mode
will cycle through the fan
speed settings randomly.
Sleep Breeze Mode
will cycle through the fan
speed settings in order.
When using electrical appliances, basic safety precautions should always be taken including the following:
1. Read all instructions before using this appliance.
2. Use fan only for purposes described in the instruction manual.
3. To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids and plug the appliance directly into a 120V AC electrical outlet.
4. Close supervision is necessary when any appliance is used by or near children.
5. Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning.
6. Avoid contact with moving parts.
7. Do not operate in the presence of explosive and/or flammable fumes.
8. To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance.
9. Do not operate any appliance with a damaged cord or plug after the appliance malfunctions, or has been dropped/damaged in any manner.
10. The use of attachments not recommended or sold by the appliance manufacturer may cause hazards.
11. Do not let the cord hang over the edge of a table, counter or come in contact with hot surfaces or leave exposed to high traffic areas.
12. Do not use outdoors.
13. To disconnect, grip plug and pull from wall outlet. Never yank on cord.
14. Always use on a dry, level surface.
15. Do not operate fan until fully assembled with all parts properly in place.
16. This product is intended for household use ONLY and not for commercial or industrial applications.
17. WARNING: To reduce the risk of electrical shock and injury to persons, do not use in window.
18. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed control device.
PLEASE READ AND SAVE
THESE IMPORTANT
SAFETY INSTRUCTIONS
CLEANING/MAINTENANCE
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS
SAFETY FEATURE IN ANY WAY.
Fig. 3
Fig. 4
Fig. 1
I
J
E
F
G
H
Screw X 8
F
A. Power/Speed
Control B. Timer Control C. Oscillation
Button D. Breeze Modes E. Column F. Screws (8) G. Rear Base H. Front Base I. Power Cord J. Fan Housing K. Locator tab
K
Fig. 2
A
D
B
C
L
If you have any questions regarding your product or would like to learn more about other Holmes® products, please contact our Consumer Service Department at 1-800-546-5637 or visit our website at www.holmesproducts.com.
HTF3609A_09EM1.indd 2HTF3609A_09EM1.indd 2 10/23/09 9:03:55 AM10/23/09 9:03:55 AM
Loading...