4. Remove protective plastic bag from the filter cartridge.
5. Return the filter to the unit by tilting the filter cartridge top toward you
as you insert the bottom of the cartridge fully into the filter recess.
NOTE: black carbon side of filter should be facing outwards. Some filters
utilize hang tabs and filter clips. The clip can only be attached to the
tabs on the filter one way only. The filter clip should easily slide onto the
filter hang tab with only a small amount of pressure. DO NOT use force
while attaching the clip to the filter. Align the clip on the top of the HEPA
filter with the rails on the inside of the purifier unit. Gently slide the
filter onto the rail. (fig. 1)
6. Replace front grill back onto unit securely.
DO NOT POINT OUTLET TOWARDS WALL.
OPERATING INSTRUCTIONS
1. Plug into a 120V AC electrical outlet.
2. Select the desired operating speed. Holmes Air Purifiers have two
or three different speed settings depending on the model you own. You
can select from HI, MED, or LOW by sliding the switch to the desired
setting. The power light will illuminate letting you know the power is on.
3. To release negative ions into the filtered air slide the ionizer switch to
ON and the light will illuminate.
4. For optimum air filtration, it is recommended to operate the air purifier
continuously. It’s rugged motor has been designed to give many years
of use.
For continuous use, it’s recommended to operate the air purifier at the
MEDIUM setting. For quieter operation or use in a bedroom, select the LOW
setting. When high levels of air pollution are present select the HI setting
to quickly circulate and filter the room air.
CLEANING / MAINTENANCE INSTRUCTIONS
CLEANING INSTRUCTIONS
Turn off and unplug the unit before cleaning.
1. The outside of the air purifier can be cleaned with a soft,
dampened cloth.
2. The front grill can be removed and washed in warm soapy water
(not dishwasher safe). Dry before replacing in the unit.
3. The top air outlet grill can be cleaned of dust with a small
soft brush.
WARNING: Do not allow moisture to come in contact with the main
housing of the air purifier.
FILTER REPLACEMENT INSTRUCTIONS
1
. Filter Check Indicator – There are three different types of indicators
used in our air purifiers. Your air purifier may have one of the following: a filter condition sticker that serves as a color coded reference
point. A filter reminder dial that is manually set to remind the user
when it is time to replace the filter. Or an indicator light that illuminates when it is time to change the filter.
2. Every few weeks, check the condition of the filters.
3. Remove the front grill. If the unit is equipped with a foam pre-filter,
examine the filter. If it has collected a noticeable amount of dust or
lint, remove it from the inlet of the grill and wash it in warm soapy
water. Rinse and drip dry the pre-filter thoroughly before replacing it
into the inlet of the grill.
4. If there is a separate carbon odor filter it should be replaced every 23 months. This helps extend the life of the HEPA filter and provides
optimal odor removal.
5. With the front grill removed, check the condition of your HEPA filter. If
the filter is dirty remove the used HEPA cartridge and dispose of it in
the garbage. Do NOT try to wash and re-use the HEPA filter.
Replace with a new HEPA filter, removing the protective polybag
before inserting into the air purifier.
6. Units with a filter reminder dial should be set ahead 3-6 months
depending on usage.
7. Units which have an indicator light must be reset once
the HEPA filter has been replaced. Reset indicator by
inserting a small object (such as a pin or paperclip)
into the hole marked reset. (fig. 2)
NOTE: The pleated material and rubber gasket should
be facing towards the unit when applied.
8. Filter Life – Under normal conditions of continuous use, the HEPA
filter will operate efficiently for 3-6 months.
Replacement filters are available from your local supplier
or by calling 1-800-5-HOLMES.
TROUBLESHOOTING
Problem Solution
Unit will not operate Check to make sure unit is properly plugged in
Check to make sure the unit is on by sliding the
power switch to the ON position, or by pressing the
power button. If applicable,check the remote control for batteries.
Decreased air flow Check the filters to see if they are in good
condition and if they need to be changed.
Check to ensure nothing is blocking air inlet and
filtered air outlet.
When using electrical appliances, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and injury
to persons, including the following:
1. Read all instructions before using appliance.
2. To avoid fire and shock hazard, plug the appliance directly into a 120V
AC electrical outlet.
3. If the filter is covered by a bag when shipped: remove plastic bag over
filter before use.
4. Keep the cord out of heavy traffic areas. To avoid fire hazard NEVER put
the cord under rugs, near heat registers, radiators, stoves or heaters.
5. To protect against electrical hazards DO NOT immerse in water or other
liquids. Do not use near water.
6. Close supervision is necessary whan any appliance is used by, or near
children or by disabled people.
7. Always unplug the air purifier before moving it, opening the grill,
changing the filters or whenever the air purifier is not in use. Be sure
to pull by the plug and not the cord.
8. NEVER drop or insert any object into any openings.
9. Do not operate any appliance with a damaged cord or plug, if motor
fan fails to rotate, after the appliance malfunctions, or if it has been
dropped or damaged in any manner. Return appliance to manufacturer
for examination, electrical or mechanical adjustment or repair.
10. Use appliance only for the intended household use as described in this
manual. Any other use not recommended by the manufacturer may
cause fire, electric shock or injury to persons. The use of attachments
not recommended or sold by the Holmes Group may cause hazards.
11. Do not use outdoors.
12. Never block the air openings, or place on soft surface, such as bed or
sofa, as this could cause the unit to tip over, blocking the air intake
opening.
13. Keep unit from heated surfaces and open flames.
14. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the
unit contains no user serviceable parts. All servicing should be performed by qualified personnel only.
15. WARNING: To reduce the risk of fire or electrical shock, DO NOT use
this air purifier with any solid-state speed control device.
CORD AND PLUG INSTALLATION SAFETY INSTRUCTIONS
The length of cord used on this appliance was selected to reduce the
hazards of becoming tangled in, or tripping over a longer cord. If a longer
cord is necessary an approved extension cord may be used. The electrical
rating of the extension cord must be equal to or greater than the rating of
the air purifier. Care must be taken to arrange the extension cord so that it
will not drape over the countertop or table-top where it can be pulled on
by children or accidentally tripped over.
Congratulations on your purchase of an Air Purifier. Your Air Purifier
has an attractive stylish design. It’s versatility and quiet operation
make this unit perfect for both the home and the office.
OPTIONAL ODOR FILTER
1.) An optional odor filter can be installed in your air purifier. This
filter helps remove unpleasant odors, and extends the life of your main
HEPA filter.
2.) Specialized odor filters are available for targeted odor removal for use
in removing general purpose, smoke, pet/nursery or kitchen odors.
IONIZER
Your Air Purifier has an independently controlled ionizer, which, when
turned on, releases negative ions into outgoing filtered air. Ions are tiny
particles that carry a positive or negative charge. These ions exist naturally
around us, in the air, water and ground. Both positive and negative ions
are colorless, odorless and completely harmless.
Negative ions help the air purification process by attaching
themselves to very small airborne particles in the room. These
particles take on a negative charge and may join with positively charged
particles such as dust, pollen, smoke and pet dander to form larger
particles that are then more readily captured by the filter system, or they
may be attracted to positively charged surfaces like walls or floors.
You may also note after extended use, that dust may have collected around
the grills or front panel. This is from the ionization affect caused by the
negative ions exiting from the air outlet. This is additional evidence of the
air cleaning effectiveness of negative ions. The dust can be easily removed
with a clean, dampened cloth or soft brush.
PLEASE NOTE: It is important to replace the HEPA filter at the recommended intervals. Using the ionizer in conjunction with dirty filters may result in
dirty particles exiting the air purifier and being attracted to walls, carpets,
furniture or other household objects. These dirty particles may prove very
difficult to remove.
ADDITIONAL FEATURES
Filter Check Indicator – There are three different types of indicators used
by Holmes Air Purifiers. Your air purifier may have one of the following: a
filter condition sticker that serves as a color coded reference point. A filter
reminder dial that is manually set to remind the user when it is time to
replace the filter. Or an indicator light that illuminates when it is time to
change the filter.
PRE-OPERATING INSTRUCTIONS
1. Carefully unpack your air purifier. Select a firm level place where there are
no obstructions to the air inlet (front grill) or filtered air outlet (top of unit).
A good location in a room is about 2 feet above the floor and approximately 1 foot away from the wall, in a central location of your home.
2. Removal of the front grill varies with different models. Depending on
the model you own you will need to do the following: Press grill release
buttons on either side of the grill and pull forward, OR pull grill towards
you by grasping sides of the grill.
3. Remove HEPA filter by gripping on both sides and pulling forward.
THIS PRODUCT IS EQUIPPED WITH A POLARIZED AC
(Alternating Current) PLUG (a plug having one blade wider
than the other). This plug will fit into the power outlet only
one way. If the plug does not fit fully into the outlet,
reverse the plug. If it still does not fit, contact qualified
personnel to install the proper outlet. DO NOT DEFEAT THE
SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY.
PLEASE READ AND SAVE THESE IMPORTANT
SAFETY INSTRUCTIONS
FEATURES - OPERATIONS
Figure 1
Figure 2
PLEASE READ AND SAVE THESE
IMPORTANT SAFETY INSTRUCTIONS