How it Works
Holmes
Loading...
HAOF1310
Owner's Manual
2 pgs66.21 Kb0

Holmes HAOF1310 Owner's Manual

Table Fan
HAOF1310
WARRANTY INFORMATION
SERVICE INSTRUCTIONS
1. Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the Warranty.
2. If you need to exchange the unit, please return it in its original carton, with a sales receipt, to the store where you purchased it. If you are returning the unit more than 30 days after the date of purchase, please see the enclosed Warranty.
THE HOLMES GROUP, INC. CONSUMER SERVICE DEPARTMENT 32B SPUR DRIVE EL PASO, TX 79906
For your own records, staple or attach your sales receipt to this manual. Also, please take a moment to write the store name/location and date purchased below. STORE NAME: LOCATION: DATE PURCHASED:
(STAPLE RECEIPT HERE)
THREE (3) YEAR LIMITED WARRANTY
SAVE THIS WARRANTY INFORMATION
A. This Warranty applies only to the original purchaser of this product. B. This Warranty applies ONLY to repair or replacement of any supplied or manufactured parts of this product that, upon inspection by The Holmes Group, Inc. authorized
personnel, is shown to have failed in normal use due to defects in material or workmanship. The Holmes Group will determine whether to repair or replace the unit. This Warranty does not apply to installation expenses.
C. Operating this unit under conditions other than those recommended or at voltages other than the voltage indicated on the unit, or attempting to service or modify the
unit, will render this WARRANTY VOID.
D.Unless otherwise proscribed by law, The Holmes Group shall not be liable for any personal injury, property or any incidental or consequential
damage of any kind (including water damage) resulting from malfunctions, defects, misuse, improper installation or alteration of this product.
E. All parts of this product are guaranteed for a period of 3 years as follows:
1. Within the first 30 days from date of purchase, the store from which you purchased your product should replace this product if it is defective in material or workmanship
(provided the store has in-stock replacement.) If you intend to assert any claim in connection with the product, please follow the instructions in paragraph F.
2. Within the first thirty-six months from date of purchase, The Holmes Group will repair or replace the product if it is defective in material or workmanship, subject to
the conditions in paragraph G. F. If you have any other problem or claim in connection with this product, please write our Consumer Service Department. G.IMPORTANT RETURN INSTRUCTIONS. Your Warranty depends on your following these instructions if you are returning the unit to The Holmes Group, Inc.:
1. Carefully pack the item in its original carton or other suitable box to avoid damage in shipping.
2. Before packing your unit for return, be sure to enclose: a) Your name, full address with zip code and telephone number, b) A dated sales receipt or PROOF OF PURCHASE, c) Your $7.50 (USD) check for return shipping and handling, and
d) The model number of the unit and the problem you are having. (Enclose in an envelope and tape directly to the unit before the box is sealed.)
3. The Holmes Group recommends you ship the package U.P.S ground service for tracking purposes.
4. All shipping charges must be prepaid by you.
5. Mark the outside of your package:
HOLMES THE HOLMES GROUP, INC. 32B SPUR DRIVE EL PASO, TX 79906 SHIPPING AND HANDLING CHARGES: $7.50 (USD)
This Warranty gives you specific legal rights, and you may have other rights which vary from state to state. The provisions of this Warranty are in addition to, and not a modification of, or subtraction from, the statutory warranties and other rights and remedies contained in any applicable legislation. To the extent that any provision of this Warranty is inconsistent with any applicable law, such provision shall be deemed voided or amended, as necessary, to comply with such law.
Holmes
®
and the Holmes®logo are registered trademarks of The Holmes Group, Inc.
JOB#HAOF1310.02.FR.OM1 Printed in China
Owner’s Guide
PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS
HAOF1310_Eng.qxd 12/04/2002 09:47 AM Page 1
FEATURES - OPERATIONS
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
1. Read all instructions before using the appliance.
2. To avoid fire or shock hazard, plug the appliance directly into a 120 V AC electrical outlet.
3. Keep the cord out of heavy traffic areas. DO NOT let the cord hang over the edge of a table or counter. To avoid fire hazard, NEVER put the cord under rugs, near heat registers, radiator, stoves, or heaters.
4. To protect against electrical hazards, DO NOT immerse in water or other liquids. Do not use near water.
5. Close supervision is necessary when any appliance is used by or near children, or by disabled people.
6. Always unplug the fan before moving it, putting on or taking off parts, cleaning, or whenever the fan is not in use. Be sure to pull by the plug and not the cord.
7. Avoid contact with moving parts. DO NOT operate without fan grills properly in place.
8. DO NOT operate any appliance with a damaged cord or plug, if motor fan fails to rotate, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Return appliance to manufacturer for examination, electrical or mechanical adjustment, or repair.
9. DO NOT operate in the presence of explosive and/or flammable fumes.
10. Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by The Holmes Group may cause hazards.
11. DO NOT use outdoors.
12. Always use on a dry, level surface.
13. Keep unit away from heated surfaces and open flames.
14. WARNING: To reduce the risk of fire or electric shock, DO NOT use this fan with any solid-state speed control device.
15. DO NOT attempt to repair or adjust any electrical or
mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by qualified personnel only.
PLEASE READ AND SAVE
THESE IMPORTANT
SAFETY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
BASE/POLE ASSEMBLY
1. Slide the bottom end of the pole through the decorative cup.
2. Turn the base upside down and place the washer onto the bottom of the base.
3. Insert the Threaded end of the L shaped locking lever into the hole of the washer and through the base and into the bottom of the pole. Turn the locking lever clockwise until the pole and base are secured together.
4. Set the base on the floor and push the decorative cup until it sits directly on the base.
PLEASE READ AND SAVE THESE
IMPORTANT SAFETY INSTRUCTIONS
THIS PRODUCT IS EQUIPPED WITH A POLARIZED AC (Alternating Current) PLUG (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact qualified personnel to install the proper outlet.
DO NOT DEFEAT THE SAFETY PURPOSE OF THIS
POLARIZED PLUG IN ANY WAY
FAN HEAD ASSEMBLY
1. Position the rear grill over the motor shaft, making sure to align the holes in the rear grill with the two screws that protrude through motor housing. Please make sure the rear grill fits securely against the motor housing.
2. Secure the rear grill in its place using the mounting nut. Turn this nut clockwise and tighten firmly.
3. Slide the fan blade, with the hollowed interior of the blade facing toward the rear grill, firmly onto the motor shaft. The top of the motor shaft should lie even with the center of the fan blade.
4. Align the flat of the shaft with the securing screw on the fan blade and slide the fan blade onto the shaft with the securing screw facing the rear grill.
5. Center the front grill by aligning the Holmes logo so it is horizontal and parallel to the floor. Then secure the front and rear grills completely together by placing the plastic ring on to secure the fan grills.
FINAL ASSEMBLY
Insert the neck of the fan head into the hollow end of the pole and turn the neck clockwise to lock into place.
OPERATING INSTRUCTIONS
1. Set the fan base on a dry, level surface.
2. Please make sure the on/speed switch is in the off position. Plug cord into any standard 120 volt A/C outlet.
3. The SPEED is adjusted by turning the control knob to the desired setting, O-III-II-I.
4. The OSCILLATION control knob is located on the top of the fan motor housing. To start oscillation, push control knob down. To stop oscillation, pull control knob up.
ADJUSTMENT INSTRUCTIONS
TILT ADJUSTMENT
1. To change the tilting angle of the fan head, simply loosen the tilt adjustment knob.
2. Move the fan head to the desired angle, then firmly tighten the knob to lock into place.
CLEANING/MAINTENANCE INSTRUCTIONS
Follow these instructions to correctly and safely care for your Holmes Table fan. Please remember:
• Always unplug the fan before cleaning or disassembling.
• Do not allow water to drip on or into the fan motor housing.
• Do not use any of the following as a cleaner: gasoline, thinner, or benzene.
(See instructions for fan head assembly)
1. To access the fan blade, remove the front grill and then
unscrew the securing screw on the fan blade.
2. Clean the fan blade, both front and rear grills with a soft
cloth moistened with a mild soap solution.
3. Replace blade, tighten the fan blade by screwing the fan
blade back on, and securely fasten the front grill.
FAN HEAD AND BASE CLEANING
Using a soft, moist cloth, with or without a mild soap solution, carefully clean the fan base and head. Please use caution around the motor housing area. Do not allow the motor or other electrical components to be exposed to water.
FAN STORAGE
Your fan can be stored in the off-season either partially disassembled or assembled. It is important to keep it in a safe, dry location.
• If stored disassembled or assembled, we recommend using the original (or appropriately sized) box.
• Remember to protect the fan head from dust or moisture.
FIGURE 1
A. Front Grill B. Fan Blade C. Securing Screw D. Mounting Nut E. Front Grill Ring F. Rear Grill G. Motor Shaft H. Motor Housing I. Fan Neck
J. Tilt Adjustment
Knob K. Decorative Cup L. Base M. L Shaped
Locking Lever N. Pole O. Washer
A
B
C
D
E
F
G
H
J
K
L
O
M
I
N
HAOF1310_Eng.qxd 12/04/2002 09:47 AM Page 2
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use