Holman Cooking/Star Mfg QCSe-2, QCSe-3 Operation Manual

®
®
®
®
®
CONVEYOR
TOASTER
MODEL
Installation and
Operation
Instructions
2M-HG0653 Rev. E 5/11/2010
QCSe-2
1
2
These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual ac­companying the appliance.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE
Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability.
Star reserves the right to change specications and product design without
notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
Due to periodic changes in designs, methods, procedures, policies and
regulations, the specications contained in this sheet are subject to change without notice. While Star Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions
in information provided or conclusions reached as a result of using the
specications. By using the information provided, the user assumes all risks in connection with such use.
MAINTENANCE AND REPAIRS
Contact your local authorized service agent for service or required maintenance. Please record
the model number, serial number, voltage and purchase date in the area below and have it ready when you call to ensure
a faster service.
SAFETY SYMBOL
Model No.
Serial No.
Voltage
Purchase Date
Business 8:00 am to 4:30 p.m. Central Standard Time Hours:
Telephone: (800) 807-9054 Local (314) 781-2777 Fax: (800) 396-2677 Local (314) 781-2714
E-mail Parts@star-mfg.com
Service@star-mfg.com
Warranty@star-mfg.com
Website: www.star-mfg.com
Service Help Desk
Authorized Service Agent
Reference the listing provided with the unit
or for an updated listing go to:
Website: www.star-mfg.com E-mail Service@star-mfg.com Telephone: (800) 807-9054 Local (314) 781-2777
Mailing Address: Star International Holdings Inc., Company
10 Sunnen Drive
St. Louis, MO 63143
U.S.A
2
SPECIFICATIONS: QCSe2-300H
Type: Conveyor Toaster w/ Electronic Controls
120V, 1,700 watts, 14.1 amp, 60 hz, NEMA 5-15P Product Opening: 3" inches Approximate shipping weight - 64 lbs (140.8 kg) Dimensions: 14 5/8" - Width, 22 3/8" - Depth, 15 5/8" - Height / (37.1 cm - Width, 56.8 cm - Depth, 39.7 cm - Height)
QCSe2-500
Type: Conveyor Toaster w/ Electronic Controls
120V, 1,700 watts, 14.1 amp, 60 hz, NEMA 5-15P Product Opening: 1 1/2" inches Approximate shipping weight - 64 lbs (140.8 kg) Dimensions: 14 5/8" - Width, 22 3/8" - Depth, 15 5/8" - Height / (37.1 cm - Width, 56.8 cm - Depth, 39.7 cm - Height)
QCSe2-600H
Type: Conveyor Toaster w/ Electronic Controls
208V, 2,800 watts, 13.4 amp, 60 hz, NEMA 6-20P Product Opening: 3" inches 240V, 2,800 watts, 11.6 amp, 60 hz, NEMA 6-20P
Approximate shipping weight - 64 lbs (140.8 kg) Dimensions: 14 5/8" - Width, 22 3/8" - Depth, 15 5/8" - Height / (37.1 cm - Width, 56.8 cm - Depth, 39.7 cm - Height)
QCSe2-800
Type: Conveyor Toaster w/ Electronic Controls
208V, 2,800 watts, 13.4 amp, 60 hz, NEMA 6-20P Product Opening: 1 1/2" inches 240V, 2,800 watts, 11.6 amp, 60 hz, NEMA 6-20P
Approximate shipping weight - 64 lbs (140.8 kg) Dimensions: 14 5/8" - Width, 22 3/8" - Depth, 15 5/8" - Height / (37.1 cm - Width, 56.8 cm - Depth, 39.7 cm - Height)
QCSe3-950H
Type: Conveyor Toaster w/ Electronic Controls
208V, 3,200 watts, 15.3 amp, 60 hz, NEMA 6-20P Product Opening: 3" inches 240V, 3,200 watts, 13.3 amp, 60 hz, NEMA 6-20P
Approximate shipping weight - 68 lbs (149.6 kg) Dimensions: 18 5/8" - Width, 22 3/8" - Depth, 15 5/8" - Height / (47.3 cm - Width, 56.8 cm - Depth, 39.7 cm - Height)
QCSe3-1000
Type: Conveyor Toaster w/ Electronic Controls
208V, 3,200 watts, 15.3 amp, 60 hz, NEMA 6-20P Product Opening: 1 1/2" inches 240V, 3,200 watts, 13.3 amp, 60 hz, NEMA 6-20P
Approximate shipping weight - 68 lbs (149.6 kg) Dimensions: 18 5/8" - Width, 22 3/8" - Depth, 15 5/8" - Height / (47.3 cm - Width, 56.8 cm - Depth, 39.7 cm - Height)
QCSe3-1300
Type: Conveyor Toaster w/ Electronic Controls
208V, 3,600 watts, 17.3 amp, 60 hz, NEMA 6-30P Product Opening: 1 1/2" inches 240V, 3,600 watts, 15.0 amp, 60 hz, NEMA 6-30P
Approximate shipping weight - 68 lbs (149.6 kg) Dimensions: 18 5/8" - Width, 22 3/8" - Depth, 15 5/8" - Height / (47.3 cm - Width, 56.8 cm - Depth, 39.7 cm - Height)
3
GENERAL INSTALLATION DATA
CAUTION
This equipment is designed and sold for commercial use only by personnel trained and experienced
in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations.
Before using your new equipment, read and understand all the instructions & labels associated with
the unit prior to putting it into operation. Make sure all people associated with its use understand the units operation & safety before they use the unit.
All shipping containers should be checked for freight damage both visible and concealed. This
unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is received in damaged condition, either apparent or concealed, a claim must be made with the delivering carrier.
Concealed damage or loss - if damage or loss is not apparent until after equipment is unpacked, a
request for inspection of concealed damage must be made with carrier within 15 days. Be certain to retain all contents plus external and internal packaging materials for inspection. The carrier will make
an inspection and will supply necessary claim forms.
INSPECTION & ASSEMBLY
UNCRATING AND INSPECTING
Unpack the unit and components from the shipping container. Remove all visible packing material
and those from inside the cooking chamber. If damage is discovered, le a claim immediately with
the carrier that handled the shipment. Do not operate the unit if it was damaged during shipping.
CAUTION
WARNING
ASSEMBLY AND INSTALLATION
The unit was shipped fully assembled and ready to plug into a standard outlet specied for its voltage
and amp draw. If improper electrical supply is determined, contact a qualied electrician prior to
using the unit. Removal and replacement of the power cord and plug will void the warranty. For assistance, contact your local authorized service agent for service or required maintenance.
Level unit using the adjustable feet under the unit (approximately 1/2" adjustment).
Before using the unit for the rst time, wipe down the exterior with a damp cloth.
Allow enough space around the toaster for adequate ventilation. Do not operate the unit without the
crumb tray properly positioned. Overheating and poor toasting may occur. Read all labels on the unit and follow their instructions.
ELECTRICAL CONNECTION
Before making any electrical connection to this unit, check that the power supply is adequate for the
voltage, amperage and requirements stated on the rating plate. A wiring diagram is included herewith.
Never plug a 208V unit into 240V or 240V unit into a 208V. Disconnect the unit from the power source before installing or removing any parts. Be absolutely sure that the ground connection for the receptacle is properly wired. Do not connect
equipment to power without proper ground connections. Improper grounding may result in personal
injury or fatality.
WARNING
WARNING
DO NOT CUT OR REMOVE THIS PLUG OR GROUNDING PRONG FROM THE PLUG.
CONNECT/PLUG UNIT INTO DEDICATED A.C. LINE ONLY SPECIFIED ON THE
DATA PLATE OF THE UNIT.
4
DAILY OPERATION
The Holman QCSe conveyor toaster comes with pre-programmed factory
default settings for TOAST, MUFFINS, and BAGELS. The operator may change these setting at any time. A button labeled OTHER is provided to allow the operator to program settings for additional product(s).
Press TOAST and TST will appear in the display. Press MUFFIN and MUF will appear in the display. Press BAGEL and BGL will appear in the display. Press OTHER and OTH will appear in the display.
LIGHT and DARK buttons are used to change the conveyor speeds
when in toast, mufn, or bagel modes.
Pressing the (LIGHT) button once will increase the conveyor speed by
15%. Pressing twice (XLIGHT) will increase the conveyor speed by 30%.
Pressing the (DARK) button once will decrease the conveyor speed by
10%. Pressing twice (XDARK) will decrease the conveyor speed by 20%.
Note: After 60 seconds the conveyor speed will return to the
pre-programmed setting.
The factory default settings are as follow:
TOAST AND OTHER BAGEL:
TOP HEAT 9 TOP HEAT 9 BOTTOM HEAT 9 BOTTOM HEAT 9
CONVEYOR 59 CONVEYOR 24
OTHER: POWER SAVER:
TOP HEAT 9 TIME (minutes) 60 BOTTOM HEAT 9 HEAT 5 CONVEYOR 59
The QCSe toaster is equipped with a Power Saver Switch (SAVER) that
reduces the power used by the toaster after a pre-programmed period of time. This Power Saver Switch has three modes:
ON: Unit is in pre-programmed power saving setting. OFF: Power Saver mode is turned off. AUTO ON: Power Saver turns on when there has been no activity
for a programmed length of time.
The operator may adjust the level of power reduction for the saver mode.
(Note: conveyor may move slowly when in saver mode.)
Two buttons (+) and (-) are used when increasing or decreasing the value
of each programmable setting.
A red LED light located at the lower portion of the control panel label will
indicate if the value for top heat, bottom heat or conveyor speed is being adjusted.
5
CAUTION
LOAD UP
CRUMB TRAY
CONTROLS
LCD DISPLAY
FRONT
AIR INTAKE FAN
HIGH LIMIT RESET
POWER CORD
CERTAIN SURFACES ARE EXTREMELY HOT DURING OPERATION AND CARE
SHOULD BE TAKEN WHILE USING THIS UNIT.
START UP
When the toaster has been plugged into a suitable outlet and power supply, the word OFF will be
displayed on the L.E.D. read out.
A. Press the ON/OFF button once to turn on the toaster. The toaster will now enter into pre-heat and
PREHT will be displayed (the elements will begin to glow but the conveyor and fan motor will not turn on). B. After one minute, the fan motor will turn on and the conveyor will begin turning at the previously
saved setting (for initial start up, the drive motor will operate at the factory default setting).
C. After four minutes, the display will show the last used program selection i.e. TOAST, BAGEL,
MUFFIN or OTHER (for initial startup, TOAST will be the last program selected).
DAILY OPERATION
Check the power cord to insure that it is plugged into a proper outlet. Press the ON/OFF button once to turn the toaster on.
Press the button a second time to turn the toaster off.
NOTE: When the toaster is turned off, the fan and conveyor motors will continue to run for ve
minutes. The words COOL and DOWN will be alternately displayed during that time. After ve
minutes, the word OFF will be displayed until the ON/OFF button is pressed again. For units equipped with a POWER SAVER feature, the three operating modes are:
ON Unit has entered the pre-programmed level of power savings. OFF Power Saver feature is turned off. AUTO If the toaster has been idle for a pre-set period of time, the unit enters Power Saver
mode until one of the menu buttons has been pressed. Once the toaster has been pre-heated, the menu buttons can be pressed to change to TOAST,
BAGEL, MUFFIN, or OTHER. OPERATING HINTS AND SAFETY
Disconnect power to the unit with the ON/OFF button at the end of each day of operation. Do not leave the unit in operation without an attendant. Turn the POWER SAVER Switc h to Standby during idle periods. It will take only a few minutes to
regain operating temperature. Do not leave the unit at high temperature when not in use or during idle periods. This will cause food
particles and grease lm to carbonize.
TOASTER COMPONENTS
6
Loading...
+ 14 hidden pages