Holman Cooking 12MC, 15MC, 18MCP Operation Manual

Download

Page 1

DISPLAY

MERCHANDISERS

MODEL

12MC 15MC

18MCP

Installation and

Operation

Instructions

2M-Z5378 Rev. I 9/16/2011

Page 2

These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability.

Star reserves the right to change specications and product design without

notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

Due to periodic changes in designs, methods, procedures, policies and

regulations, the specications contained in this sheet are subject to change without notice. While Star International Holdings Inc., Company exercises good faith efforts to provide information that is accurate, we are not

responsible for errors or omissions in information provided or conclusions

reached as a result of using the specications. By using the information provided, the user assumes all risks in connection with such use.

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance. Please record the model number, serial number, voltage and purchase date in the area below and have it ready when

you call to ensure a faster service.

SAFETY SYMBOL

Model No.

Serial No.

Voltage

Purchase Date

Business

8:00 am to 4:30 p.m. Central Standard Time

Hours: Telephone: (314) 684-6303 Fax: (314) 781-2714

E-mail [email protected]

[email protected]

Website: www.star-mfg.com

Service Help Desk

Authorized Service Agent Listing

Reference the listing provided with the unit

or for an updated listing go to:

Website: www.star-mfg.com E-mail [email protected]

Mailing Address: Star International Holdings Inc., Company

10 Sunnen Drive St. Louis, MO 63143 U.S.A

Page 3

SPECIFICATIONS

Model

Voltage Hz Ph Watts Amps Plug Width Depth Height

120V 60Hz

12MC

230V 50/60Hz 2.07 CEE7-7 120V 60Hz 3.96 5-15P

12MCPT

230V 50/60Hz 2.07 CEE7-7 120V 60Hz

15MC

230V 50/60Hz 2.72 CEE7-7

15MCMR 120V 60Hz 5.21 5-15P

120V 60Hz 5.21 5-15P

15MCPT

230V 50/60Hz 2.72 CEE7-7

15MCN 120V 60Hz 5.21 5-15P

Electrical Dimensions

3.96 5-15P

475

5.21 5-15P

1Ph

625

12 1/2”

(31.8cm)

15”

(38.1cm)

13 5/8”

(34.7cm)

14 3/4”

(37.5cm)

16 1/8”

(40.9cm)

17 1/4”

(43.8cm)

16 1/8”

(40.9cm)

18 7/8”

(47.9cm)

24 7/8”

(63.2cm)

Weight

23.5lbs

(10.66kg)

25lbs

(11.34kg)

35.5lbs

(16.1kg)

37lbs

(16.78kg)

35.5lbs

(16.1kg)

18MCP

18MCPT

120V 60Hz 230V 50/60Hz 1.04 CEE7-7 120V 60Hz 2.08 5-15P 230V 50/60Hz 1.04 CEE7-7

2.08 5-15P

250

18 1/2” (47cm)

19 5/8”

(49.8cm)

20 3/4”

(52.7cm)

42lbs

(19.05kg)

44lbs

(19.96kg)

Page 4

RECOMMENDED DIAL SETTINGS

OFF

RED INDICTOR LIGHT

RIGHT DIAL

CONTROLS UPPER SHELF TEMPERATURE

LEFT DIAL

CONTROLS BASE TEMPERATURE

ON/OFF SWITCH ACTIVATES CABINET LIGHT

OFF

RED INDICTOR LIGHT

TEMPERATURE DIAL - ADJUST CABINET TEMPERATURE. ALIGN DESIRE SETTING WITH RED INDICATOR BUTTON. SEE DIAL SETTINGS BELOW.

ON/OFF SWITCH - ACTIVATES CABINET LIGHT AND AIR CIRCULATION SYSTEM.

IL2350

Models:

18MCP 18MCPT

Models:

12MC 12MCPT 15MC 15MCPT

All settings are recommendations only and could vary depending on product preparation, cooking time, and internal food temperature.

DIAL SETTING FOR DESIRED TEMPERATURE (APPROXIMATE)

DIAL TEMPERATURE RATINGS

Dial Settings 12MC, 12MCPT 15MC, 15MCPT

Low

1 110°F (43°C) 140°F (60°C) 2 110°F (43°C) 115°F (46°C) 130°F (54°C) 150°F (66°C)

105°F (40°C) 105°F (40°C)

3 110°F (43°C) 120°F (49°C) 145°F (63°C) 160°F (71°C) 4 130°F (54°C) 130°F (54°C) 170°F (77°C) 185°F (85°C) 5 170°F (77°C) 150°F (66°C) 215°F (102°C) 215°F (102°C)

High 200°F (93°C) 195°F (91°C) 220°F (104°C) 235°F (113°C)

18MCP, 18MCPT

Base Upper Shelf

110°F (43°C) 135°F (57°C)

Page 5

GENERAL INSTALLATION DATA

CORNDOG SHELF

DOOR SIDE SHELF ROD

CRUMB TRAY

CUSTOMER SIDE

SHELF ROD

IL1030

ALIGNMENT HOLE

CAUTION

This equipment is designed and sold for commercial use only by personnel trained and

experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations.

Before using your new equipment, read and understand all the instructions & labels

associated with the unit prior to putting it into operation. Make sure all people associated with its use understand the units operation & safety before they use the unit.

All shipping containers should be checked for freight damage both visible and concealed.

This unit has been tested and carefully packaged to insure delivery of your unit in perfect condition. If equipment is received in damaged condition, either apparent or concealed, a claim must be made with the delivering carrier.

Concealed damage or loss - if damage or loss is not apparent until after equipment is

unpacked, a request for inspection of concealed damage must be made with carrier within 15 days. Be certain to retain all contents plus external and internal packaging materials for

inspection. The carrier will make an inspection and will supply necessary claim forms.

INSTALLATION

This merchandising cabinet is equipped for the voltage and wattage indicated on the nameplate mounted on the back of the unit and is designed for use on alternating current (AC) only.

CORN DOG SHELF INSTALLATION

To Ensure shelf works properly follow these steps.

1. Place the front (customer side) shelf rod on the bottom setting.

2. Place the rear (door side) shelf rod on the third setting.

3. Install the crumb tray so it sits on the shelf rods.

4. Position the corn dog shelf so the alignment hole faces the door (as shown in Fig 1).

5. Thiscongurationwillallowthecorndogs

to stand straight up.

WARNING DO NOT CONNECT TO DIRECT CURRENT (DC).

FIG. 1 CORNDOG SHELF INSTALLATION

Page 6

GENERAL OPERATING INSTRUCTIONS

1. Ensure cabinet is plugged into the proper voltage receptacle prior to turning on.

2. Pre-heat cabinet with the door closed until the desired temperature setting is reached (15-60 minutes depending on the temperature setting and the merchandiser model).

3. Set temperature according to the tables on pages 5 and 6.

4. Load product onto shelves.

5. Monitor cabinet temperature via the thermometer. Check food product temperature with an approved food thermometer.

CAUTION

DO NOT BLOCK VENT HOLES ON TOP OF THE CABINET (12MC/15MC)

CLEANING INSTRUCTIONS

1. Disconnect electrical cord before cleaning the cabinet.

2. To maintain finish and shine of unit, wipe daily with a damp cloth and mild soap.

Do not use harsh detergents or scouring pads.

3. Daily cleaning of inside glass, bottom pan and racking system with a damp cloth is

recommended.

4. Daily clean shelves and crumb trays (some models) using mild detergent.

MAINTENANCE AND REPAIRS

Contact the factory, a service representative or a local service company for service or required maintenance.

Page 7

CORD SET

L2L1

H2H1

WHT

BLK

WHT

BLK

WHT

HI-LIMIT THERMOSTAT

HEATING ELEMENT

BLOWER

INFINITE CONTROL

SWITCH

BLK

LAMP

TERMINAL BLOCK

WHT

BLK

STAR MANUFACTURING INTERNATIONAL INC.

SK1887 01/25/02

12MC/15MC WIRE DIAGRAM

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

LAMP

H1 H2

L2L1 L1 L2

H1 H2

CORD SET

RIGHT FRONT LEFT FRONT

LAMP

WHT

BLK

SHELF ELEMENT

BOTTOM ELEMENT

CORNER POST CORNER POST

SHELF

TOP

BASE CONTROL

TOP CONTROL

SWITCH

STAR MANUFACTURING INTERNATIONAL INC.

SK1886 01/25/02

18MCP WIRE DIAGRAM

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

Page 8

OFF

STAR MANUFACTURING INTERNATIONAL, INC.

CERTAIN INSTANCES MAY NOT BE AVAILABLE

ILLUSTRATIVE PURPOSES ONLY AND IN

SOME ITEMS ARE INCLUDED FOR

MODEL: 12MC/MCPT, 15MC/MCPT/MCN

SK1893 REV. C 9/16/11

CORNDOGS

NOT INCLUDED

MODEL: 15MCN

24 27

1413

33 34

28 29 30

Page 9

PARTS LIST September 16, 2011 Rev I

Model: 12MC, 12MCPT, 15MC, 15MCN, 15MCPT, 15MCMR

Key No Part No Qty Description Application

2L-Z5064

2L-Z4287 15MC, 15MCPT 2M-Z5113

2M-Z4577 15MC, 15MCPT 2U-Z5349

2U-Z5511 230V

4 2E-Z4597 1 Terminal Block

D5-Z5073

D5-Z5072 15MC, 15MCPT 6 2T-Z0622 1 Thermstat High Limit 7 D5-Z5074 1 Lamp Housing

2S-Y9118 8

2S-Z0630 230V 9 2E-Y9184 1 Socket

2N-Z5294

2N-Z5512 Element 350W - 230V 12MC, 12MCPT

2N-Z0337 Element 500W - 120V 15MC, 15MCPT

2N-Z0793 Element 500W - 230V 15MC, 15MCPT

D5-Z5069

D5-Z4288 15MC, 15MCPT

12 D5-Z4528 1/2 Hinge Bracket 12/15 13 2T-Z0613 1 Thermometer

14 2C-9788

D5-Z5317 4

D5-Z5316

D5-Z5101 2

D5-Z4286 3 15MC, 15MCPT

2I-Z5065

2I-Z4532 15MC, 15MCPT

2I-Z5116

2I-Z4581 15MC / 15MCPT

2I-Z5115

2I-Z4580 15MC, 15MCPT

2Q-Z5066

2Q-Z4579 15MC / 15MCPT

D5-MC0013

D5-MC0003 15MC / 15MCPT

22 2C-Z5427 1 Nylon Spacer

D5-Z5117

D5-Z4650 15MC, 15MCPT

24 ----- 1 Nameplate

1 Top Cover

1 Top Front Graphic

1 Blower Assembly

1 Heating Duct

1 Lamp 100W

Element 350W - 120V 12MC, 12MCPT

1 Top Liner

Magnetic Catch

2 12MCPT, 15CPT

Shelf Rod

6 15MC, 15MCPT 2 15MCN

Shelf

3 Corner Post

Glass Channel

6/4

Horizontal

8 Glass Channel Vertical

3/2 Side Glass

1/2 Assembly, Door

2 Shelf Bracket Left

12MC, 12MCPT

120V

12MC, 12MCPT

12MC, 12MCPT, 15MC, 15MCPT

120V

12MC, 12MCPT

12MC, 15MC

12MC, 12MCPT

12MC / 12MCPT

12MC, 12MCPT

12MC / 12MCPT

12MC, 12MCPT

Model: 12MC, 12MCPT, 15MC, 15MCN, 15MCPT, 15MCMR

Key No Part No Qty Description Application

D5-Z5246

D5-Z5245 15MC, 15MCPT

26 2M-Z6646 1 Door Graphic 15MCMR 27 2M-Z2718 28 2R-Z5128 1 Knob Innite Control

29 2E-Y6144 1 Switch

2J-Z2195

2J-Z2192 230V D5-Z5070 D5-Z5260 12MCPT

D5-Z4651 15MC D5-Z5261 15MCPT 2I-Z5118

2I-Z5110 15MC, 15MCPT

33 2K-Y3240 1 Strain Relief Bushing 34 D5-MC0014 1 Cordset Assembly

D5-Z5355

D5-Z5356 15MCPT 36 D5-Z5364 1 Stiffener Right 37 D5-Z5363 1 Stiffener Left 38 D5-Z5076 1 Access Panel

D5-Z5071

D5-Z5257 12MCPT 39

D5-Z4289 15MC

D5-Z5258 15MCPT 40 2I-Z0057 4 Foot 41 D5-Z9141 1 Crumb Tray 15MCN 42 D5-Z9142 1 Corn Dog Shelf 15MCN 43 D5-Z5368 1 Catch Bracket

2 Shelf Bracket Right

Star Emblem

2 15MC, 15MCPT

1 Innite Control

1 Bottom Liner

1 Corner Post-Wire

1 Stiffener

1 Bottom Cover

12MC, 12MCPT

120V

12MC

12MC, 12MCPT

120V 230V 12MCPT

12MC

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE, INCLUDING MODEL AND SERIAL NUMBER.

Some items are included for illustrative purposes only and in certain instances may not be available.

Star Manufacturing International, Inc.

Page 10

OFF

XIMUM USE

TEMPERATURE 200°

100

°F

°C

120

140

160

180

200

STAR MANUFACTURING INTERNATIONAL, INC.

CERTAIN INSTANCES MAY NOT BE AVAILABLE

ILLUSTRATIVE PURPOSES ONLY AND IN

SOME ITEMS ARE INCLUDED FOR

Page 11

PARTS LIST September 16, 2011 Rev H

18MCP, 18MCPT

MODEL

Key

Number

1 2L-Z4526 1 Top Cover 2 2M-Z4541 1 Top Front Graphic 3 D5-Z4527 1 Top Liner 18MCP 4 D5-Z4528 1/2 Hinge Bracket 18MCP / 18MCPT 5 2R-9788 1/2 Magnetic Catch 18MCP / 18MCPT 6 D5-Z4529 1 Shelf Top 7 D5-Z5373 2 Insulation 8 D5-Z8818 1 Foil Element-Stripped 65W - 120V D5-Z8841 1 Foil Element-Stripped 65W - 230V 9 2I-Z4552 6/4 Glass Channel Horizontal 18MCP / 18MCPT 10 2I-Z4580 8 Glass Channel Vertical 11 2I-Z5217 2 Corner Post 12 D5-Z4530 1 Shelf Bottom 13 D5-Z5263 2 Lamp Housing 14 2S-Z4554 2 Light Bulb 60W 120V Tubular 2S-Z5572 2 Light Bulb 60W 230V Tubular 15 2E-Y9184 2 Socket 16 ----- 1 Nameplate 17 2Q-Z4534 3/2 Side Glass 18MCP / 18MCPT 18 2E-Z4597 1 Terminal Block

19 2J-Z2195 2 InniteControl-120V  2J-Z2192 2 InniteControl-230V

20 D5-Z4681 1 Bottom Liner 18MCP D5-Z5262 1 Bottom Liner 18MCPT 21 2M-Z2718 1/2 Star Emblem 18MCP / 18MCPT

22 2R-Z5128 2 KnobInniteControl

23 2E-Y6144 1 Switch 24 2N-Z8817 1 Foil Element 65W - 120V 2N-Z8840 1 Foil Element 65W - 230V 25 2M-Z5365 1 Decal-Lower 26 2M-Z5366 1 Decal-Upper 27 D5-MC0008 1/2 Assembly, Door 18MCP / 18MCPT 28 2C-Z5427 1/2 Nylon Spacer 18MCP / 18MCPT 29 D5-Z5357 1 Stiffener 30 2I-Z5218 2 Corner Post-Wire 31 D5-MC0014 1 Cordset Assembly - 120V D5-MC0016 1 Cordset Assembly - 230V 32 D5-Z5363 1 Stiffener Left 33 D5-Z5364 1 Stiffener Right 34 2K-Y3240 1 Strain Relief Bushing 35 D5-Z4682 1 Bottom Cover 18MCP D5-Z5259 1 Bottom Cover 18MCPT 36 D5-Z5235 1 Access Panel 37 2I-Z0057 4 Foot 38 2T-Z0613 1 Thermometer 39 2C-9788 1 Magnetic Catch

Part

Number

Per

Unit

Description and Model Designation

Number

IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED PAGE 1 INCLUDE MODEL AND SERIAL NUMBER OF 1

Some items are included for illustrative purposes only and in certain instances may not be available.

Star Manufacturing International, Inc.

Page 12

2M-4497-2 10/2010

The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.

FOR ASSISTANCE

Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department.

In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using.

ALL: * Pop-Up Toasters * Butter Dispensers * Pretzel Merchandisers

(Model 16PD-A Only)

* Pastry Display Cabinets * Nacho Chip Merchandisers * Accessories of any kind * Sneeze Guards * Pizza Ovens

(Model PO12 Only)

* Heat Lamps * Pumps-Manual

Visit our Website at: www.star-mfg.com Email: [email protected]

THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL

This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the transportation company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty status of the unit.

LIMITED EQUIPMENT WARRANTY

All workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is limited to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below) should be taken to the closest Star service agency, transportation prepaid.

> Star will not assume any responsibility for loss of revenue. > On all shipments outside the United States and Canada, see International Warranty. * The warranty period for the JetStar six (6) ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years. * The warranty period for the Chrome-Max Griddles is ve (5) years on the griddle surface. See detailed warranty provided with unit. * The warranty period for Teon/Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to

Teon/Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners, abrasive pads, product identiers and

point-of-sale attachments, or any other non-food object tha comes in continuous contact with the roller coating. This warranty does not apply to the “non-stick” properties of such materials.

> This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six (6) months on parts

and ninety (90) days on labor.

> This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or

the Service Center's sub-agency.

> This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and

Operating instructions.

> This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician.

PARTS WARRANTY

Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted. Labor to replace the part is chargeable to the customer.

SERVICES NOT COVERED BY WARRANTY

PORTABLE EQUIPMENT

Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below. These products should be taken to the Service Agency for repair:

1. Travel time and mileage rendered beyond the 50 mile radius limit

2. Mileage and travel time on portable equipment (see below)

3. Labor to replace such items that can be replaced easily during a daily cleaning routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc.

4. Installation of equipment

5. Damages due to improper installation

6. Damages from abuse or misuse

7. Operated contrary to the Operating and Installation Instructions

8. Cleaning of equipment

9. Seasoning of griddle plates

10. Voltage conversions

11. Gas conversions

12. Pilot light adjustment

13. Miscellaneous adjustments

14. Thermostat calibration and by-pass adjustment

15. Resetting of circuit breakers or safety controls or reset buttons

16. Replacement of bulbs

17. Replacement of fuses

18. Repair of damage created during transit, delivery, & installation OR created by acts of God

* The Model 510FD Fryer. * The Model 526TOA Toaster Oven. * The Model J4R, 4 oz. Popcorn Machine. * The Model 518CMA & 526CMA Cheese Melter. * The Model 12MC & 15MC & 18MCP Hot Food Merchandisers. * The Model 12NCPW & 15NCPW Nacho Chip/Popcorn Warmer. * All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers. * All Nacho Cheese Warmers except Model 11WLA Series Nacho Cheese Warmer. * All Condiment Dispensers except the Model HPD & SPD Series Dispenser. * All Specialty Food Warmers except Model 130R, 11RW Series, and 11WSA Series. * All QCS/RCS Series Toasters except Model QCS3 & RCS3 Series. * All Fast Steamer Models except Direct Connect Series.