Holman MK21015 Instruction Manual
Parts Included:
• 20 x Metres of Misting Hose • 30 x Hose Clamps with Masonary Nails
• 19 x Misting Tees • 3 x Misting Elbow
• 20 x Brass Misting Nozzles • 3 x Tee Connector
• 3 x Elbow Connector • 1 x Misting Filter
• 1 x Auto Draining Valve • 1 x Misting Universal Tap Adaptor
• 1 x Pipe Cutter
Instruction Manual
Note: Flush Misting System thoroughly before
attaching misting Nozzles to prevent blockages.
Scan the QR Code on the right to see more information on
the Misting System - including a product guide video.
Product Code: MK21015
Misting System
20
Metre Deluxe Kit
2014-Misting System Deluxe Instruction Manual V2.indd 1
7/08/2014 4:36:09 PM
Table of Contents
Outdoor Cooling Misting System
1. Outdoor Cooling Misting System..............p1
2. The Way It Works.....................................p1
3. Glossary................................................p2
4. Misting System Assembly & Installation....p3
A. Plan Your Misting Installation.................p3
B. Water Supply.........................................p3
C. Positioning Misting Jets.........................p4
D. Installing The Fittings.............................p5
E. Installing The Misting System...............p6-7
F. Flushing The System..............................p8
G. Water Filter............................................p8
H. Auto Drain Valve....................................p8
5. Maintenance Of Your Misting System.....p9
6. Troubleshooting......................................p9
7. Warranty....................................Back Page
2014-Misting System Deluxe Instruction Manual V2.indd 2
7/08/2014 4:36:09 PM
The Way It Works
The misting system cools the air temperature by the evaporation of
the fine particles of water emitted by the misting nozzles. The process
of evaporation absorbs heat from the air and cools the area.
The misting nozzle emits very small amounts of water. It also breaks
the water into very small droplets or a “mist”.
In hot conditions, the small water droplets evaporate almost
instantaneously. In cooler or humid conditions the evaporation rate
may be slower.
Generally, you will not want to run the misting systems continuously. If
you do, the general environment may become damp and unpleasant.
The simple way to solve this problem is to use a Holman Misting Timer.
This timer can be programmed to suit the environmental conditions
of the day. You can easily adjust the “ON” time (in seconds) and
the “OFF” time (in seconds or minutes) and the misting system will
automatically turn on and off as you desire.
Outdoor Cooling Misting System
PLEASE READ INSTRUCTION MANUAL BEFORE USE
The Holman Misting system features 10mm diameter high pressure
tubing with “compression fittings” that are made to match this tubing.
The compression fittings fit the pipe very precisely and simply push
over the pipe and are very easy to assemble. No clamps are required.
Please note that your misting system can be expanded with more
Holman misting parts. These are available at your Holman stockist.
1
2014-Misting System Deluxe Instruction Manual V2.indd 3
7/08/2014 4:36:09 PM
2
Glossary
Misting System Assembly & Installation
Parts Included:
1)
20 x Metres of Misting Hose
7)
3 x Misting Elbow
2)
19 x Misting Tees
8)
3 x Tee Connector
3)
20 x Brass Misting Nozzles
9)
1 x Misting Filter
4)
3 x Elbow Connector
10)
1 x Misting Universal Tap Adaptor
5)
1 x Auto Draining Valve
11)
1 x Pipe Cutter
6)
30 x Hose Clamps with
Masonary Nails
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
2014-Misting System Deluxe Instruction Manual V2.indd 4
7/08/2014 4:36:10 PM
Loading...