DN744000TX / DN744800TX
Driness Drop Leaf Table - White/Gray
Driness Drop Leaf Table - Black/Dark
Weathered Gray
ASSEMBLY INSTRUCTIONS
Holly & Martin® a valued brand of SEI
Customer Service 1-800-633-5096
service@hollyandmartin.com
www.hollyandmartin.com
Driness Drop Leaf Table
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing any hardware.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
Screw diagrams below. You may receive extra hardware with your unit.
A Quantity
Of 5
Long bolt (M6*50mm)
B Quantity
Of 1
Allen wrench
C Quantity
of 4
glass holder(φ10*18*M6)
D Quantity
Of 11
screw (φ3.5*15mm)
E Quantity
Of 8
Adjustable leveler (φ33*M8)
F Quantity
Of 16
short bolt (M6*45mm)
1 Quantity
Of 1
Middle Top panel
2 Quantity
Of 1
Side Top panel
3 Quantity
Of 1
Top metal frame
4 Quantity
of 1
Bottom Metal Frame
5
Quantity
of 2
Leg frame 1
6 Quantity
of 2
Leg frame 2
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Avoid rubbing or scratching the surface with rough or
abrasive objects.
Call SEI customer service at 1-800-633-5096 for
assistance, questions, or Parts.
Assembly Tool Required:
No.2 Phillips Screwdriver (Not Included)
Driness Drop Leaf Table
Assembly Instructions
Figure 1
Unpack and lay parts on
clean, padded surface like
carpet or blanket. Check that
you have all parts indicated
on the front page.
Attach top metal frame (3) to
leg frames (5/6) using short
bolts (F)
Tighten short bolts (F) with
Allen wrench (B).
Figure 2
Turn over unit in figure 1
Attach bottom metal frame
(4) to leg frames (5/6) using
short bolts (F).
Tighten short bolts (F) with
Allen wrench (B).
Figure
3
Attach side top panel (2) to
middle top panel (1) using
screws (D).
Tighten screws (D) using
Phillips screwdriver (not
included).
.
Figure 4
Connect pre-assembled unit
from Figure 2 and
pre-assembled unit Figure 3
by inserting long bolts (A) into
the five holes of top metal
frame (3).
Tighten long bolts (A) with
Allen wrench (B).
4
3
Figure5
Insert pin stoppers (C) into
holes on top panel (1).
Note: These pins function as
a stopper when top panel is in
folded position.
Figure 6
Screw adjustable levelers (E)
into the bottom of the table
legs.
Note: Adjust each stopper so
that the table is stable.
3
4
Figure 7
.
With an assistant, turn the
table upright.
Now you can enjoy your new
Driness Dining Table.
Figure 8
Converting to a console:
Fold leg frames by hand.
Fold top panels by hand.
Top panel supports up to
50 lbs.
Drop leaf supports up to 15
lbs.
Close leg frame
by hand
Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame. Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at service@hollyandmartin.com. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
service@hollyandmartin.com
www.hollyandmartin.com
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Loading...