Holland Bh421-ss1 Owner's Manual
The Premier
BH-421-SS-1
Instruction Manual
The only Grill
GUARANTEED
not to flare up!
This Is A Revolutionary Gas Grill!
L.P .NOTICE: This grill shall
be connected only to a 20lb.
L.P. cylinder that is equipped
with a Sherwood Valve
#PV3349.
READ THIS BOOK FIRST
American Gas Association Design Certified
Canadian Gas Association Design Certified
L.P. Tank
not included.
BARBECUE INDUSTRY
ASSOCIATION MEMBER
The Holland Grill
®
Dear Friend,
I wish to personally thank your for purchasing one of my Holland Grills. It’s my goal
that you, your family and friends enjoy your grill for many years to come.
It’s important that you are aware that the Holland is unlike any other grill. By
design, it allows you to grill, steam or smoke, without the fear of flare-ups commonly
associated with competitive brands. Now you can enjoy being with your friends while
preparing quality food without the worry and nuisance of trying to control fires.
Not only will you be able to enjoy time with friends while you grill in comfort, you’ll be
able to do so for years to come. My grill is made of quality materials which give it a
sturdiness that will last for years. Unlike other grills on the market, I do not intend for
my customers to deal with a long list of replacement parts and the inconvenience of
waiting for the parts. This grill was designed and made for your trouble-free outdoor
cooking.
Since the Holland does not operate like other grills, it is important to me that you
follow all the instructions. I have spent a large portion of my life developing a product
that is safe, easy to use and grills to perfection; I personally want to know your comments, questions or any problems that arise from the grill or our field
representatives.Please feel free to contact me with your comments, or contact a local
dealer who will help you with parts, accessories, literature and warranty.
Thank you,
IT’S IMPORTANT THAT YOU, THE OWNER, READ THE ENTIRE MANUAL BEFORE ASSEMBLING OR
USING THE GRILL. IF YOU ALLOW SOMEONE ELSE TO USE YOUR GRILL, MAKE SURE THEY HAVE
READ THE INSTRUCTIONS AND UNDERSTAND THEM BEFORE YOU LET THEM OPERATE THE GRILL.
SAFETY INFORMATION
WARNING: FOLLOW
LOCAL CODES
The installation of this appliance must conform with local codes or in the absence of
local codes, conform to the National Fuel
Gas Code ANSI Z223.1.
Installation shall be in accordance with
CAN/CGAB149.1 natural gas installation
code or CAN/CGA-B149.2 propane installation code and local codes where applicable.
YOUR GRILL IS MADE FOR
OUTDOOR USE ONLY
A minimum clearance of 18 inches on the
sides and back must be kept between the
grill and combustible construction.The grill
shall not be located under overhead unprotected combustible construction.
THE VENT STACKS AND THE INTAKE AIR
OPENING should never be blocked or
closed while operating.
THE FUEL SYSTEM
Gas grills are used SAFELY by millions of
people when following simple SAFETY
precautions.
The items in the fuel system are designed
for operation with the Holland Grill.They
must not be replaced with any other brand.
(See parts list for replacement items.)
GAS BURNER: The gas burner is made of
heavy cast iron and should not require maintenance other than inspection for insect
nests inside the venturi. If you remove the
burner for cleaning, it must be reinstalled
exactly as removed.
AIR SHUTTER: See Item 10 in lighting
instructions (See figure 8 for details.)
BURNER VALVE: The burner valve is operated in only two positions.The Off position is
when the handle is across (perpendicular
to) the burner,which stops the flow of gas.
When the valve has been set in the Off position, it is important to close the valve at the
LP gas cylinder.The LP gas cylinder is the
primary valve and must be closed when the
grill is not in use.The On position is when
the handle is in line with the burner (See
figure 8 for details. See lighting instructions for more information.) The burner
valve controls the heat allowed in the grill
by means of a plug orifice.This device is set
at the factory and must not be tampered
with or replaced.
ONLY A FACTORY SUPPLIED VALVE
SHOULD BE USED.(See the parts list for
replacement items.)
LP GAS HOSE: The LP gas hose is designed
for use with LP gas only.Use with any other
gas is dangerous.The hose is made of a flexible material to make it easy to install.This
material is subject to considerable twisting
and turning during installation. It is very
important that the hose be inspected for
cracks, cuts, abrasions, wear and loose fittings.The visual inspection should include
leak testing the entire length of hose and fittings. (See final assembly instructions for
more information.)
If the hose shows signs of damage or leakage, it must be replaced prior to the operation of the grill. Only a factory authorized
replacement part can be used. (See the
parts list for replacement items.) Failure to
properly inspect or replace hose with an
authorized replacement may result in accident or injury.
P-1
OWNERS MANUAL
IF STACK FILTERS BECOME DIRTY OR
CLOGGED THEY CAN BE REMOVED
AND THE GRILL OPERATED SATISFACTORILY WITHOUT THEM UNTIL NEW
FILTERS ARE OBTAINED AND
INSTALLED.
FOR YOUR SAFETY
IF YOU SMELL GAS:
1. SHUT OFF GAS TO THE APPLIANCE.
2. EXTINGUISH ANY OPEN FLAME.
3. OPEN LID.
4. IF ODOR CONTINUES, IMMEDIATELY
CALL YOUR GAS SUPPLIER OR FIRE
DEPARTMENT.
FOR YOUR SAFETY
1. DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE VAPORS AND LIQUIDS
IN THE VICINITY OF THIS OR ANY OTHER
APPLIANCE.
2. AN LP CYLINDER NOT CONNECTED FOR USE
SHALL NOT BE STORED IN THE VICINITY OF
THIS OR ANY OTHER APPLIANCE.
THIS GRILL IS NOT INTENDED TO BE
INSTALLED IN OR ON RECREATIONAL
VEHICLES AND/OR BOATS
THIS COOKING APPLIANCE IS FOR
OUTDOOR USE ONLY AND SHALL
NOT BE USED IN A BUILDING,
GARAGE OR ANY OTHER
ENCLOSED AREA.
IMPORTANT
The grill should be lit and
allowed to operate for at least 30
minutes before using for the first
time to allow preservative to burn
off. After smoke stops coming out
of stacks, grill is ready for your use
and enjoyment.
THIS GRILL IS NOT FOR
COMMERCIAL USE
LP GAS REGULATOR
-- CA
UTION -
The gas pressure regulator provided with
this appliance must be used.This regulator is
set for an outlet pressure of 11 inches water
column. Substitution of regulator by any
other device or any other manufacturer's
regulator is dangerous and could result in
serious injury.(See the parts list for replace-
ment items.)
PROPANE FUEL: Warning -- propane is a
flammable gas and improper handling may
result in explosion and/or fire and serious
accident or injury.Your grill is designed to
operate on LP gas and is equipped with the
proper orifice for this gas. CAUTION: Do not
connect this grill to any gas supply except
propane or natural gas. Propane gas is
heavier than air and will settle in low areas.
Make certain adequate ventilation is available when using your grill and that the gas
cylinder is stored outside in a well ventilated
place out of reach of children when the grill
is not in use.
LP GAS CYLINDER: This grill is designed and
intended to be used with an LP gas cylinder
with a nominal LP gas capacity of 20
pounds. Such a cylinder is approximately 123/8" in diameter with an overall height of
18-1/16".The Holland Grill does not come
with an LP gas cylinder.This must be purchased separately and is available at most
hardware stores.The cylinder used must be
constructed and marked in accordance with
the specifications for LP gas cylinders of the
U.S. Department of Transportation (DOT)
(4BA-240) and the National Standard of
Canada CAN/CSA-B339, cylinders, spheres,
and tubes for the transportation of dangerous goods. Only a cylinder equipped with
an overfill protection device (OPD) should
be used.
THE LP GAS CYLINDER shall be used only
outdoors in a well ventilated space and not
in a building, garage, or any other enclosed
area.The LP gas cylinder is designed to be
used, stored, and transported in the upright
position.The Holland Grill may be stored
indoors if the LP gas cylinder is removed
and stored outdoors. NEVER turn the cylinder upside down or on its side.Always transport, store and use your cylinder in the
upright position.
The cylinder must be provided with a
Sherwood valve,part #PV3349, which will
connect with (quick connect) the QCC-1
Fitting provided on each of our LP
(propane) grills. Must also have a safety
relief device having a direct communication
with the vapor space of the cylinder.The
cylinder supply system must be arranged for
vapor withdraw.The cylinder shall include a
collar to protect the cylinder valve.The grill
must be connected to the gas supply by a
hose.
DO NOT transport a full or empty gas
cylinder in a closed automobile trunk or
in a closed passenger area.
Filling the gas cylinder requires removing it
from the grill.The cylinder is attached to the
grill by connecting the regulator assembly to
the inlet portion of the gas cylinder valve.
This connection is made by the QCC-1 fitting pictured in Figure 1-A.The large plastic
nut fits on the outside of the threads and
turns right, or clockwise to tighten. No tools
are necessary.Hand tight is sufficient. If a
good connection is not achieved,the safety
valve inside will not permit the proper
amount of gas to flow.When connecting the
regulator to the cylinder valve, be sure the
pressure relief valve is directed away from
the front and away from the grill. If the relief
valve should open, the propane will be
directed where it is likely to do the least
harm.To disconnect regulator assembly turn
large plastic nut left or counter-clockwise.
When disconnecting and connecting the gas
cylinder, be careful that the regulator assembly does not strike the grill, the ground, or
any other surface. If any difficulty at all is
had in connecting or disconnecting the regulator assembly to the cylinder valve,contact your local gas supplier for assistance.
When disconnected from the cylinder, a
valve cap must be installed. (See figure 1-A.)
Failure to install a valve cap when the cylinder is disconnected from the fuel system is
dangerous and may result in accident or
injury.
When reconnecting the LP gas cylinder, be
sure to tighten the fitting until snug.This
connection, as well as all other fittings and
connections between the cylinder and burner valve, should be inspected for damage
and leak tested after every filling or reconnection. (See lighting instructions,
Figure 8.)
Keep any electrical supply cord and fuel
supply hose away from any heated surface.
NATURAL GAS: If natural gas is used, contact your local supplier to set it up properly.
The N.G.Holland Grill is set to operate at 7
inches water column pressure,using an orifice with a #54 drill size. If your grill seems
too hot, first call your local gas company to
determine what pressure you have. Ne
ver
allow anyone to change orifice size without
authorization from factory.
P-2
FIGURE 1-A
VALVE
OUTLET
HANDWHEEL
NIPPLE
REGULATOR
CAP & STRAP
COUPLING NUT
CONNECT,
TIGHTEN
CLOCKWISE
CYLINDER
VALVE
DISCONNECT,
LOOSEN COUNTERCLOCKWISE
Loading...