Holland Bh421-ag3 Owner's Manual

Instruction Manual

READ THIS BOOK FIRST

BARBECUE INDUSTRY

ASSOCIATION MEMBER

©The Holland Grill Co., Inc. V2003 PN AG3 -MAN

ANSI Z21.58b-2002 CGA 1.6b-2002

L.P. NOTICE: This grill shall
be connected only to a 20 lb.
L.P. cylinder that is equipped

with a Sherwood Valve

#PV3349 AND an overfill

protection device (OPD).

L.P. Tank not included.

BH421 AG-3

The only Grill

not to flare up!

TM TM

Tradition

Tradition

LS

LS

The

®

Dear Friend,

I wish to personally thank your for purchasing one of my
Holland Grills. It’s my goal that you, your family and friends
enjoy your grill for many years to come.

It’s important that you are aware that the Holland is unlike any other grill. By
design, it allows you to grill or smoke, without the fear of flare-ups commonly
associated with competitive brands. Now you can enjoy being with your
friends while preparing quality food without the worry and nuisance of trying
to control fires.

Not only will you be able to enjoy time with friends while you grill in comfort,
you’ll be able to do so for years to come. My grill is made of quality materials
which give it a sturdiness that will last for years. Unlike other grills on
the market, I do not intend for my customers to deal with a long list of
replacement parts and the inconvenience of waiting for the parts.
This grill was designed and made for your trouble-free outdoor
cooking.

Since the Holland does not operate like other grills, it is
important to me that you follow all the instructions. I have spent
a large portion of my life developing a product that is safe,
easy to use and grills to perfection; I personally want to know
your comments, questions or any problems that arise from the
grill or our field representatives.Please feel free to contact me
with your comments, or contact a local dealer who will help
you with parts, accessories, literature and warranty.

Thank you,

IT’S IMPORTANT THAT YOU, THE OWNER, READ THE ENTIRE MANUAL BEFORE
ASSEMBLING OR USING THE GRILL. IF YOU ALLOW SOMEONE ELSE TO USE YOUR
GRILL, MAKE SURE THEY HAVE READ THE INSTRUCTIONS AND UNDERSTAND THEM
BEFORE YOU LET THEM OPERATE THE GRILL.

My patented no flare-up design

ensures your food can’t catch

on fire. Simply close the lid

and cook by time.

T-1

®

THE TRADITION LS GRILL OWNERS MANUAL

Safety Information

Please read carefully.

Gas grills are used SAFELY by millions of people when following
simple SAFETY precautions.

The items in the fuel system are designed for operation with the
Holland Grill. They must not be replaced with any other brand.
(See parts list for replacement items.)

GAS BURNER: The gas burner is constructed of heavy cast iron
and should not require maintenance other that inspection for
insect nests inside the venturi. If you remove the burner for clean­ing, it must be reinstalled exactly as removed.

Air shutter: See item 11 in lighting instructions on page T-7 (see
figure 6 for details.)

BURNER VALVE: The burner valve is operated in only two
positions. The Off position is when the knob bar is Horizontal, the
pointer is at the OFF mark. This stops the flow of gas. When the
valve has been set in the OFF position, it is important to also
close the valve on the LP tank or Natural gas supply. The On
position is when the knob bar pointer is straight up, at the
ON/LIGHT position. The burner valve controls the heat allowed
in the grill by means of a plug orifice. This device is set at the
factory and must not be tampered with. See Lighting instructions
on page T-7 for more information. Turn off LP supply at cylinder
when appliance is not in use.

ONLY A FACTORY SUPPLIED VALVE SHOULD BE USED.
(See the parts list for replacement items.)

LP GAS HOSE: The LP gas hose is designed for use with LP
gas only. Use with any other gas is dangerous. The hose is made
of a flexible material to make it easy to install.This material is
subject to considerable twisting and turning during installation. It
is very important that the hose be inspected for cracks, cuts,
abrasions, wear and loose fittings.The visual inspection should
include leak testing the entire length of hose and fittings. (See
final assembly instructions for more information.)

If the hose shows signs of damage or leakage, it must be
replaced prior to the operation of the grill. Only a factory author­ized replacement part can be used. (See the parts list for
replacement items.) Failure to properly inspect or replace hose
with an authorized replacement may result in accident or injury.

LP GAS REGULATOR: CAUTION: Use only the gas pressure
regulator supplied with this appliance. This regulator is set for an
outlet pressure of 11 inches water column. Substitution of
regulator by any other device or any other manufacturer's
regulator is dangerous and could result in serious injury. (See the
parts list for replacement items.)

PROPANE FUEL: Warning – propane is a flammable gas.
Improper handling may result in an explosion and/or fire and seri-

The Fuel System

FOR YOUR SAFETY

• IF YOU SMELL GAS:

1. SHUT OFF GAS TO THE APPLIANCE.

2. EXTINGUISH ANY OPEN FLAME.

3. OPEN LID.

4. IF ODOR CONTINUES, IMMEDIATELY CALL YOUR GAS SUPPLIER
OR FIRE DEPARTMENT.

FOR YOUR SAFETY

1.

DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS
AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.

2. AN LP CYLINDER NOT CONNECTED FOR USE SHALL NOT BE
STORED IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.

(A) DO NOT STORE A SPARE LP-GAS CYLINDER UNDER OR NEAR

THIS APPLIANCE;
(B) NEVER FILL THE CYLINDER BEYOND 80 PERCENT FULL; AND
(C) IF THE INFORMATION IN “-b11(a)” AND “-b11(b)” IS NOT

FOLLOWED EXACTLY, A FIRE CAUSING DEATH OR SERIOUS

INJURY MAY OCCUR.

• THIS GRILL IS NOT INTENDED TO BE INSTALLED IN OR ON
RECREATIONAL VEHICLES AND/OR BOATS.

• THIS GRILL SHALL ONLY BE CONNECTED TO AN LP CYLINDER
WITH AN OVERFILL PROTECTION DEVICE (OPD).

• THE GRILL SHOULD BE LIT AND ALLOWED TO OPERATE FOR AT LEAST
30 MINUTES BEFORE USING FOR THE FIRST TIME TO ALLOW
PRESERVATIVE TO BURN OFF. AFTER SMOKE STOPS COMING OUT OF
STACKS, GRILL IS READY FOR YOUR USE AND ENJOYMENT.

• THIS GRILL IS NOT FOR COMMERCIAL USE

• THIS COOKING APPLIANCE IS FOR OUTDOOR USE ONLY AND SHALL
NOT BE USED IN A BUILDING, GARAGE OR ANY OTHER ENCLOSED AREA.

• EXCESSIVELY WINDY OR COLD CONDITIONS MAY AFFECT GRILL
COOKING PERFORMANCE.

• CHOOSE ONLY A LEVEL LOCATION FOR GRILL OPERATION. THE HOLLAND
GRILL MUST BE SITTING SECURELY ON A LEVEL SURFACE FOR PROPER
OPERATION AND EVEN HEAT DISTRIBUTION.

• YOUR GRILL IS MADE FOR OUTDOOR USE ONLY

• THE VENT STACKS AND THE AIR INTAKE OPENINGS SHOULD NEVER BE
BLOCKED OR CLOSED DURING GRILL OPERATION.

• MINIMUM CLEARANCE FROM SIDES AND BACK OF UNIT TO COM­BUSTIBLE CONSTRUCTION, 18 INCHES (50CM) FROM SIDES AND 18
INCHES (50CM) FROM BACK.

• DO NOT USE THIS OUTDOOR APPLIANCE UNDER OVERHEAD
COMBUSTIBLE SURFACES.

• DO NOT STORE A SPARE LP GAS CYLINDER UNDER OR NEAR THIS
APPLIANCE.

WARNING: FOLLOW LOCAL CODES

• THE INSTALLATION OF THIS APPLIANCE MUST CONFORM WITH
LOCAL CODES OR IN THE ABSENCE OF LOCAL CODES, CONFORM
TO THE NATIONAL FUEL GAS CODE ANSI Z223.1./NFPA 54

• INSTALLATION SHALL BE IN ACCORDANCE WITH CAN/CGAB149.1
NATURAL GAS AND PROPANE INSTALLATION CODE AND LOCAL
CODES WHERE APPLICABLE.

T-2

®

ous accident or injury.Your grill is designed to operate on Propane
(LP) gas ONLY and is equipped with the proper orifice for this
gas.Caution: Do not connect this grill to any gas supply except
propane or natural gas. Propane gas is heavier than air and will settle
in low areas. Make certain adequate ventilation is available when using
your grill and that the gas cylinder is stored outside in a well ventilated
area out of the reach of children when the grill is not in use.

LP GAS CYLINDER: This grill is designed and intended to be used
with an LP gas cylinder with a nominal LP gas capacity of 20
pounds. Such a cylinder is approximately 12-3/8" in diameter with an
overall height of 18-1/16".The Holland Grill does not come with an
LP gas cylinder.This must be purchased separately and is available
at most hardware stores. The cylinder used must be constructed and
marked in accordance with the specifications for LP gas cylinders of
the U.S. Department of Transportation (DOT) (4BA-240) and the
National Standard of Canada CAN/CSA-B339, cylinders, spheres,
and tubes for the transportation of dangerous goods. Only a cylinder
equipped with an overfill protection device (OPD) should be used.

The LP gas cylinder shall be used only outdoors in a well ventilated
space and not in a building, garage, or any other enclosed area.The
LP gas cylinder is designed to be used, stored, and transported in
the upright position. The Holland Grill may be stored indoors if the LP
gas cylinder is removed and stored outdoors. NEVER turn the cylin­der upside down or on its side. Always transport, store and use your
cylinder in the upright position.

The cylinder must be provided with a Sherwood valve, part
#PV3349, which will connect with (quick connect) the QCC-1 Fitting
provided on each of our LP (propane) grills. Must also have a safety
relief device having a direct communication with the vapor space of
the cylinder.The cylinder supply system must be arranged for vapor
withdraw. The cylinder shall include a collar to protect the cylinder
valve.The grill must be connected to the gas supply by a hose.Turn
off LP supply at cylinder when appliance is not in use.

DO NOT transport a full or empty gas cylinder in a closed automobile
trunk or in a closed passenger area.

Filling the gas cylinder requires removing it from the grill. The cylinder
is attached to the grill by connecting the regulator assembly to the
inlet portion of the gas cylinder valve. This connection is made by the
QCC-1 fitting pictured in Figure 1-A. The large plastic nut fits on the
outside of the threads and turns right, or clockwise to tighten. No
tools are necessary. Hand tight is sufficient. If a good connection is
not achieved, the safety valve inside will not permit the proper
amount of gas to flow.When connecting the regulator to the cylinder
valve, be sure the pressure relief valve is directed away from the front
and away from the grill. If the relief valve should open, the propane
will be directed where it is likely to do the least harm. To disconnect
regulator assembly turn large plastic nut left or counter-clockwise.

When disconnecting and connecting the gas cylinder, be careful that

the regulator assembly does not strike the grill, the ground, or
any other surface. If any difficulty at all is had in connecting or
disconnecting the regulator assembly to the cylinder valve, con­tact your local gas supplier for assistance.

When disconnected from the cylinder, a valve cap must be
installed. (See figure 1-A.) Failure to install a valve cap when the
cylinder is disconnected from the fuel system is dangerous and
may result in accident or injury.

When re-connecting the LP gas cylinder, be sure to tighten the
fitting until snug. This connection, as well as all other fittings and
connections between the cylinder and burner valve, should be
inspected for damage and leak tested after every filling or
re-connection.

Keep any electrical supply cord and fuel supply hose away from
any heated surface.

NATURAL GAS: If natural gas is used, contact your local suppli­er to set it up properly. The N.G. Holland Grill is set to operate at
7 inches water column pressure, using an orifice with a #48
(NAT) drill size. If your grill seems too hot, first call your local gas
company to determine what pressure you have.

Never allow anyone to change orifice size without
authorization from factory.

SPARK IGNITOR: This grill is equipped with a rotary Piezo igni­tor system. A simple Clockwise rotation of the ignitor knob pro­duces a spark at the burner head, lighting the burner. To check
that the spark ignitor is working properly, leave gas supply
turned OFF and observe the spark by looking through the peep
hole above the control panel or from below the control panel to
the left side of the burner in the burner opening. A small blue
spark should be visible at the left side of the burner head every
time the ignitor “fires”. A loud “hammer” like sound is produced
by the mechanism when sparking.

FIGURE 1

HANDWHEEL

REGULATOR

CAP &

STRAP

COUPLING

NUT

CONNECT
Clockwise

DISCONNECT,

Counter Clockwise

CYLINDER

VALV E

20 LBS.

LP GAS CYLINDER