Please read this manual thoroughly and save it for future use before attempting to connect or operate
this unit.
The information in this manual was current when published. The manufacturer reserves the right to
revise and improve its products. All specifications are therefore subject to change without notice.
Thank you for using Tyco Security Products. We support our products through an extensive worldwide
network of dealers. The dealer through whom you originally purchased this product is your point of
contact if you need service or support. Our dealers are empowered to provide the very best in customer
service and support. Dealers should contact Tyco Security Products at (800) 507-6268 or (561)
912-6259 or on the Web at www.holisnvr.com
Trademarks
The trademarks, logos, and service marks displayed on this document are registered in the United
States [or other countries]. Any misuse of the trademarks is strictly prohibited and Tyco Security
Products. will aggressively enforce its intellectual property rights to the fullest extent of the law, including
pursuit of criminal prosecution wherever necessary. All trademarks not owned by Tyco Security
Products. are the property of their respective owners, and are used with permission or allowed under
applicable laws.
Product offerings and specifications are subject to change without notice. Actual products may vary from
photos. Not all products include all features. Availability varies by region; contact your sales
representative.
Sensormatic Electronics LLC
6600 Congress Avenue
Boca Raton,
FL33487
U.S.A.
i
Table of Contents
Table of Contents ............................................................................................................................. ii
Important Safeguards and Warnings ............................................................................................. viii
1.Features and Specifications ..................................................................................................... 1
7.Appendix A HDD Capacity Calculation ................................................................................. 206
8.Appendix B Compatible Backup Device List ........................................................................ 207
9.Appendix C Toxic or Hazardous Materials or Elements ....................................................... 215
vii
Important Safeguards and Warnings
1.Electrical safety
We assume no liability or responsibility for all the fires or electric shock caused by improper
handling or installation.
2.Transportation
Heavy stress, violent vibration or water splash should be avoided during transportation, storage
and installation.
3.Installation
We are not liable for any problems caused by unauthorized modifications or attempted repair.
4 Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
Contact your local retailer ASAP if something is broken in your package.
viii
1. Features and Specifications
Real-time
Surveillance
VGA, HDMI port. Connect to monitor to realize real-time surveillance. Some
series support TV/VGA/HDMI output at the same time.
Short-cut menu when preview.
Support popular PTZ decoder control protocols. Support preset, tour and
pattern.
Playback
Support each channel real-time record independently, and at the same time
it can support search, forward play, network monitor, record search,
download and etc.
Support various playback modes: slow play, fast play, backward play and
frame by frame play.
Support time title overlay so that you can view event accurate occurred time
Support specified zone enlargement.
User
Management
Each group has different management powers that can be edited freely.
Every user belongs to an exclusive group.
Storage
Via corresponding setup (such as alarm setup and schedule setup), you can
backup related audio/video data in the network video recorder.
Support Web record and record local video and storage the file in the client
end.
Alarm
Respond to external alarm simultaneously (within 200MS), based on user’s
pre-defined relay setup, system can process the alarm input correctly and
prompt user by screen and voice (support pre-recorded audio).
Support central alarm server setup, so that alarm information can remotely
notify user automatically. Alarm input can be derived from various
connected peripheral devices.
Alert you via email/sms.
Overview
This series NVR is a high performance network video recorder. This series product support local preview,
multiple-window display, recorded file local storage, remote control and mouse shortcut menu operation,
and remote management and control function.
This series product supports centre storage, front-end storage and client-end storage. The monitor zone in
the front-end can be set in anywhere. Working with other front-end devices such as IPC, NVS, this series
product can establish a strong surveillance network via the CMS. In the network system, there is only one
network cable from the monitor centre to the monitor zone in the whole network. There is no audio/video
cable from the monitor centre to the monitor zone. The whole project is featuring of simple connection,
low-cost, low maintenance work.
This series NVR can be widely used in many areas such as public security, water conservancy,
transportation and education.
Features
1
Network
Monitor
Through network, sending audio/video data compressed by IPC or NVS to
client-ends, then the data will be decompressed and display.
Support max 128 connections at the same time.
Transmit audio/video data by HTTP, TCP, UDP, MULTICAST, RTP/RTCP
and etc.
Transmit some alarm data or alarm info by SNMP.
Support WEB access in WAN/LAN.
Window Split
Adopt the video compression and digital process to show several windows
in one monitor. Support 1/4/8/9/16/ 25/36-window display when preview and
1/4/9/16-window display when playback.
Record
Support normal/motion detect/alarm record function. Save the recorded files
in the HDD, USB device, client-end PC, or network storage server. You can
search or playback the saved files at the local-end or via the Web/USB
device.
Backup
Support network backup, USB2.0 record backup function, the recorded files
can be saved in network storage server, peripheral USB2.0 device, burner
and etc.
Network
Management
Supervise NVR configuration and control power via Ethernet.
Support management via WEB.
Peripheral
Equipment
Management
Support peripheral equipment management such as protocol setup and port
connection.
Support transparent data transmission such as RS232 (RS-422), RS485
(RS-485).
Auxiliary
Support switch between NTSC and PAL.
Support real-time system resources information and running statistics
display.
Support log file.
Local GUI output. Shortcut menu operation via mouse.
IR control function (For some series product only.). Shortcut menu operation
via remote control.
Support IPC or NVS remote video preview and control.
Model
HOLNVR04100/HOLNVR04200/HOLNVR04400
System
System
Resources
4-ch series product support 4/ HD connection respectively. Total
bandwidth supports 80Mbps respectively.
OS
Embedded Linux real-time operation system
Operation
Interface
WEB/Local GUI
Decode
Video Decode
Type
H.264/MJPEG/MJPEG4
Specifications
HOLNVR04100/HOLNVR04200/HOLNVR04400
2
Model
HOLNVR04100/HOLNVR04200/HOLNVR04400
Decode
Capability
Max 2-ch 5M 25fps or 4-ch 3M 25fps or 4-ch 1080P 30fps
Video
Video Input
4ch network compression video input
Video Output
1-channel VGA analog video output
HDMI
1-ch HDMI output. Version number is 1.4
Window Split
1/4-window
Audio
Audio Input
1-ch bidirectional talk input
Audio Output
1-ch bidirectional talk output
Audio
Compression
Standard
G.711a
Alarm
Alarm Input
N/A
Alarm Output
N/A
Funciton
Storage
1 built-in SATA port
Multiple-Chann
el Playback
Max 4-channel 1080P playback
Port and
Indicator
RS232 Port
N/A
RS485 Port
N/A
USB Port
2 peripheral USB2.0 ports.
Network
Connection
1 RJ45 10/100Mbps self-adaptive Ethernet port.
PoE Port
4
Power Port
1 power socket. Power adapter power supplying mode. DC 48V power.
Power Button
1 button
Power On-off
Button
N/A
IR Receiver
Window
N/A
Clock
Built-in clock.
Indicator Light
One power status indicator light.
One network status indicator light.
One HDD status indicator light.
General
Power
<10W (Exclude HDD)
3
Model
HOLNVR04100/HOLNVR04200/HOLNVR04400
Consumption
Working
Temperature
﹣10℃~﹢55℃
Working
Humidity
10℅~90℅
Air pressure
86kPa~106kPa
Dimension
205mm×206.75mm×45.2mm
Weight
0.5kg~1kg (Exclude HDD)
Installation
Mode
Desk installation
Model
HOLNVR08XXX Series
HOLNVR08XXX Series
System
System
Resources
8/-channel series product support 8-channel HD connection respectively.
Main stream bandwidth supports 160Mbps respectively.
Operation
System
Embedded Linux real-time operation system
Operation
Interface
WEB/Local GUI
Decode
Video
Compression
H.264/MJPEG/MPEG4
Decode
Capacity
Max supports 8-channel 720P, or 8-channel 1080P, or 4*3M or 4*5M
decode.
Video
Video Input
8-ch network compression video input
Video Output
1-channel VGA analog video output.
HDMI
1-ch HDMI output. Version number is 1.4
Window Split
1/4/8/9/-window
Audio
Audio Input
1-ch bidirectional talk input
Audio Output
1-ch bidirectional talk output
Audio
Compression
G.711a
Alarm
Alarm Input
4-ch alarm input
Alarm Output
2-ch alarm output
HOLNVR08xxx/ HOLNVR08xxx8P
4
Function
Storage
2 built-in SATA ports.
Multiple-chan
nel Playback
Max 8-channel 720P/4-channel 1080P playback at the same time.
Port and
Indicator
RS232 Port
One RS232 port to debug transparent COM data.
RS485 port
One RS485 port to control PTZ. Support various protocols.
One power status indicator light.
One network status indicator light.
One HDD status indicator light.
General
Power
Consumption
<30W(Exclude HDD)
Working
Temperature
-10℃~+55℃
Working
Humidity
10℅-90℅
Air pressure
86kpa-106kpa
Dimension
375mm×287mm×52mm
375mm×325mm×52mm
Weight
1.5kg~2.5kg(Exclude HDD)
Installation
Desk installation
5
2. Front Panel and Rear Panel
SN
Name
Function
1
HDD status indictor
light
The red light becomes on when HDD is abnormal.
2
Power indicator light
The red light becomes on when the power
connection is OK.
3
Network status
indicator light
The red light becomes on when the network
connection is abnormal.
Front Panel
HOLNVR04100/HOLNVR04200/HOLNVR04400
The front panel is shown as in Figure 2-1.
Figure 2-1
Please refer to the following for detailed information.
6
HOLNVR08xxx/ HOLNVR08xxx8P
Name
Icon
Function
Power button
Power button, press this button for three seconds to boot up or
shut down NVR.
Shift
Shift
In textbox, click this button to switch between numeral,
English(Small/Capitalized),donation and etc.
Up/1
Down/4
、
Activate current control, modify setup, and then move up and
down.
Increase/decrease numeral.
Assistant function such as PTZ menu.
In text mode, input number 1/4 (English character G/H/I)
Left/2
Right/3
Shift current activated control,
When playback, click these buttons to control playback bar.
In text mode, input number 2(English character A/B/C)
/3(English character D/E/F)
ESC
ESC
Go to previous menu, or cancel current operation.
When playback, click it to restore real-time monitor mode.
Enter
ENTER
Confirm current operation
Go to default button
Go to menu
Record
REC
Manually stop/start recording, working with direction keys
or numeral keys to select the recording channel.
Slow play/8
Multiple slow play speeds or normal playback.
In text mode, input number 8 (English character T/U/V).
Assistant
Fn
One-window monitor mode, click this button to display assistant
function: PTZ control and image color.
Backspace function: in numeral control or text control, press it
for 1.5seconds to delete the previous character before the
cursor.
The front panel is shown as below. See Figure 2-2.
Please refer to the following for front panel button information.
Figure 2-2
7
In motion detection setup, working with Fn and direction keys to
realize setup.
In text mode, click it to switch between numeral, English
character(small/capitalized) and etc.
Realize other special functions.
Fast play/7
Various fast speeds and normal playback.
In text mode, input number 7 (English character P/Q/R/S).
Play
previous/0
|
In playback mode, playback the previous video
In text mode, input number 0.
Reverse/Paus
e/6
||
In normal playback or pause mode, click this button to reverse
playback
In reverse playback, click this button to pause playback.
In text mode, input number 6 (English character M/N/O)
Play Next/9
|
In playback mode, playback the next video
In menu setup, go to down ward of the dropdown list.
In text mode, input number 9 (English character W/X/Y/Z)
Play/Pause /5
||
In normal playback click this button to pause playback
In pause mode, click this button to resume playback.
In text mode, input number 5(English character J/K/L).
USB port
To connect USB storage device, USB mouse.
Network
abnormal
indication light
Net
Network error occurs or there is no network connection, the light
becomes red to alert you.
HDD
abnormal
indication light
HDD
HDD error occurs or HDD capacity is below specified threshold
value, the light becomes red to alert you.
Record light
1-16
System is recording or not. It becomes on when system is
recording.
IR Receiver
IR
It is to receive the signal from the remote control.
8
Rear Panel
Port Name
Connection
Function
USB2.0 port
USB2.0 port. Connect to mouse, USB storage
device, USB burner and etc.
Network port
10M/100Mbps self-adaptive Ethernet port. Connect
to the network cable.
HDMI
High Definition
Media Interface
High definition audio and video signal output port. It
transmits uncompressed high definition video and
multiple-channel data to the HDMI port of the display
device. HDMI version is 1.4.
VGA
VGA video output
port
VGA video output port. Output analog video signal. It
can connect to the monitor to view analog video.
GND
Ground end
Power input port
Power socket.
input DC 48V/1.5A.
MIC IN
Audio input port
Bidirectional talk input port. It is to receive the analog
audio signal output from the devices such as mike
phone, pickup.
MIC OUT
Audio output port
Audio output port. It is to output the analog audio
signal to the devices such as the sound box.
Bidirectional talk output.
Audio output on 1-window video monitor.
Audio output on 1-window video playback.
PoE PORT
PoE port
Built-in switch. Support PoE function.
For PoE series product, you can use this port to
provide power to the network camera.
HOLNVR04100/HOLNVR04200/HOLNVR04400
Figure 2-3
Please refer to the following for detailed information.
9
HOLNVR08xxx/ HOLNVR08xxx8P
Name
Function
Power
switch
/
Power on/off button.
Power input
socket
/
Input AC 100~240V.
Power input port
Input DC 12V/5A.
Power input port
Switch power port. Input DC 48//1.04A.
MIC IN
Audio input port
Bidirectional talk input port. It is to receive the analog
audio signal output from the devices such as mike phone,
pickup.
MIC OUT
Audio output port
Audio output port. It is to output the analog audio signal to
the devices such as the sound box.
Bidirectional talk output.
Audio output on 1-window video monitor.
Audio output on 1-window video playback.
1~4
Alarm input port
1~4
There are two types; NO (normal open)/NC (normal
close).
When your alarm input device is using external
power, please make sure the device and the NVR
have the same ground.
GND
Alarm input ground port.
N1, N2
Alarm output port
2 groups of alarm output ports. (Group 1:port NO1~
The rear panel is shown as below. See Figure 2-4.
Figure 2-4
Please refer to the following for detailed information.
10
Name
Function
C1, C2
1~2
C1,Group 2:port NO2~C2).Output alarm signal to
the alarm device. Please make sure there is power to
the external alarm device.
NO:Normal open alarm output port.
C:Alarm output public end.
A
RS-485
communication
port
RS485_A port. It is the cable A. You can connect to the
control devices such as speed dome PTZ.
B
RS485_B.It is the cable B. You can connect to the control
devices such as speed dome PTZ.
Network port
10M/100M/1000Mbps self-adaptive Ethernet port.
Connect to the network cable.
USB2.0
port
USB2.0 port. Connect to mouse, USB storage device,
USB burner and etc.
RS-232
RS-232 debug
COM.
It is for general COM debug to configure IP address or
transfer transparent COM data.
HDMI
High Definition
Media Interface
High definition audio and video signal output port. It
transmits uncompressed high definition video and
multiple-channel data to the HDMI port of the display
device. HDMI version is 1.4.
VGA
VGA video output
port
VGA video output port. Output analog video signal. It can
connect to the monitor to view analog video.
PoE
PORTS
/
Bult-in Switch. Support PoE.
The 4 PoE series product supports total 48V 50W.
Alarm Connection
Alarm Port
The alarm port is shown as below. See Figure 2-5..
11
Icon
Function
1~16
ALARM1~ALARM16. The alarm becomes activated in the
low level.
NO1 C1,NO2 C2,NO3 C3,NO4
C4
Four NO activation output groups. (On-off button).
NO5 C5 NC5
One NO/NC activation output group. (On-off button).
CTRL 12V
Control power output. Disable power output when alarm is
canceled. Current is 500mA.
+12V
Rated current output. Current is 500mA.
GND
A/B
485 communication port. They are used to control devices
such as PTZ. Please parallel connect 120TΩ between A/B
cables if there are too many PTZ decoders.
Figure 2-5
Note
Different models support different alarm input ports. Please refer to the specifications sheet for detailed
information.
Slight difference may be found on the alarm port layout.
Alarm input port
Connect the positive end (+) of the alarm input device to the alarm input port (ALARM IN 1~16) of the
NVR. Connect the negative end (-) of the alarm input device to the ground end () of the NVR.
12
Model:
JRC-27F
Material of the
touch
Silver
Rating
(Resistance
Load)
Rated switch capacity
30VDC 2A, 125VAC 1A
Maximum switch power
125VA 160W
Maximum switch voltage
250VAC, 220VDC
Figure 2-6
Note
There are two alarm input types: NO/NC.
When connect the ground port of the alarm device to the NVR, you can use any of the GND ports ().
Connect the NC port of the alarm device to the alarm input port (ALARM) of the NVR.
When there is peripheral power supplying for the alarm device, please make sure it is earthed with the
NVR.
Alarm input and output port
There is peripheral power supplying for the external alarm device.
In case overload may result in NVR damage, please refer to the following relay specifications for detailed
information.
A/B cable of the RS485 is for the A/B cable connection of the speed PTZ.
Alarm relay specifications
13
Maximum switch currency
1A
Insulation
Between touches with same
polarity
1000VAC 1minute
Between touches with different
polarity
1000VAC 1minute
Between touch and winding
1000VAC 1minute
Surge voltage
Between touches with same
polarity
1500V (10×160us)
Length of open
time
3ms max
Length of close
time
3ms max
Longevity
Mechanical
50×106 MIN (3Hz)
Electrical
200×103 MIN (0.5Hz)
Temperature
-40℃ ~+70℃
Bidirectional talk
Device-end to PC-end
Device Connection
Please connect the speaker or the pickup to the first audio input port in the device rear panel. Then connect
the earphone or the sound box to the audio output port in the PC.
Login the Web and then enable the corresponding channel real-time monitor.
Please refer to the following interface to enable bidirectional talk. See Figure 2-7.
Listening Operation
At the device end, speak via the speaker or the pickup, and then you can get the audio from the earphone
or sound box at the pc-end. See Figure 2-42.
Figure 2-7
14
Figure 2-8
Left click
mouse
When you have selected one menu item, left click mouse to view menu content.
Modify checkbox or motion detection status.
Click combo box to pop up dropdown list
PC-end to the device-end
Device Connection
Connect the speaker or the pickup to the audio output port in the PC and then connect the earphone or the
sound box to the first audio input port in the device rear panel.
Login the Web and then enable the corresponding channel real-time monitor.
Please refer to the above interface (Figure 2-7) to enable bidirectional talk.
Listening Operation
At the PC-end, speak via the speaker or the pickup, and then you can get the audio from the earphone or
sound box at the device-end. See Figure 2-10.
Figure 2-9
Mouse Operation
Please refer to the following for mouse operation instruction.
15
In input box, you can select input methods. Left click the corresponding button on
the panel you can input numeral/English character (small/capitalized). Here ←
stands for backspace button. _ stands for space button.
In English input mode: _stands for input a backspace icon and ← stands for
deleting the previous character.
In numeral input mode: _ stands for clear and ← stands for deleting the
previous numeral.
Double left
click mouse
Implement special control operation such as double click one item in the file list to
playback the video.
In multiple-window mode, double left click one channel to view in full-window.
Double left click current video again to go back to previous multiple-window mode.
Right click
mouse
In real-time monitor mode, pops up shortcut menu.
Exit current menu without saving the modification.
Press middle
button
In numeral input box: Increase or decrease numeral value.
Switch the items in the check box.
Page up or page down
Move mouse
Select current control or move control
Drag mouse
Select motion detection zone
Select privacy mask zone.
16
3. Device Installation
1. Loosen the screws of the
upper cover and side panel.
2. Fix four screws in the HDD
(Turn just three rounds).
3. Place the HDD in accordance with
the four holes in the bottom.
Note
All the installation and operations here should conform to your local electric safety rules.
Check Unpacked NVR
When you receive the NVR from the forwarding agent, please check whether there is any visible damage.
The protective materials used for the package of the NVR can protect most accidental clashes during
transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list. Finally you can remove the protective film of the NVR.
About Front Panel and Rear Panel
The model label in the front panel is very important; please check according to your purchase order.
The label in the rear panel is very important too. Usually we need you to represent the serial number when
we provide the service after sales.
HDD Installation
CAUTION
Please turn off the power before you replace the HDD.
The pictures listed below for reference only.
For the first time install, please be aware if the HDDs have been installed.
You can refer to the Appendix for HDD space information and recommended HDD brand. Please use HDD
of 7200rpm or higher. Usually we do not recommend the PC HDD.
Please follow the instructions below to install hard disk.
HOLNVR04100/HOLNVR04200/HOLNVR04400
17
4. Turn the device upside down
and then turn the screws in
firmly.
5. Fix the HDD firmly.
6. Connect the HDD cable and
power cable.
7. Put the cover in accordance
with the clip and then place the
upper cover back.
8. Secure the screws in the
rear panel and the side panel.
18
HOLNVR08xxx/HOLNVR08xxx8P
1. Loosen the screws of the
upper cover and side panel.
2. Fix four screws in the HDD
(Turn just three rounds).
3. Place the HDD in accordance with
the four holes in the bottom.
4. Turn the device upside down
and then turn the screws in
firmly.
5. Fix the HDD firmly.
6. Connect the HDD cable and
power cable.
7. Put the cover in accordance
with the clip and then place the
upper cover back.
8. Secure the screws in the rear
panel and the side panel.
Connection Sample
HOLNVR04100/HOLNVR04200/HOLNVR04400
Please refer to Figure 3-1 for connection sample.
19
HOLNVR08xxx/HOLNVR08xxx8P
Please refer to Figure3-2 for connection sample.
Figure 3-1
20
Figure 3-2
21
Loading...
+ 194 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.