HoldPeak 5040A, 5080A, 5100A, 5060A User Manual

Handheld Laser Distance Meter

5040A,5060A,5080A,5100A

User Manual

Thank you for purchasing our handheld laser distance meter.
Please carefully read this user manual and follow the instructions

below.

Warning:

1. Before using this product, please read the safety precautions and
instructions carefully. Failure to follow the instructions mentioned in
the user manual may cause damage to this instrument, affect the
measurement accuracy or even physically harm the user or someone
else.

2. Do not try to disassemble or repair the instrument by yourself,
especially the laser emitter. Do not turn on the laser beam until you
need to use this instrument. Do not stare directly at the laser emitter.

Take a good care of your instrument and don’t place it anywhere within

children’s reach. This instrument is preferred to be used by

professionals only.

3. Don’t point the laser beam at yourself or anyone else, especially in

the eyes. 4.

Don’t point the laser beam at highly-reflective object.

5. The electromagnetic radiation from this laser device may interfere
with other instrument nearby such as a pacemaker, hearing aid or
something like these.

6. Don’t use this laser device in an inflammable or explosive

environment.

7. Dispose the broken instrument and used batteries properly and

discreetly. Don’t mix them up with other normal household garbage.

Follow the related government regulations during disposal.

Keyboard:

1. Power On/Single Measurement/Consecutive Measurements Button

2. Area/Volume/ Pythagorean Proposition Indirect Measurement

3. Add/Subtraction/Unit Switch Button

4. Point of Reference Switch/Backlight Button

5. Data Storage

6. Clear/Power Off Button

Screen:

1.

Laser beam indicator

2.

Point

of Reference indicator

3. Area/Volume Calculation indicator
Pythagorean Proposition Indirect Measurement indicator

4. Battery indicator

5. Record-view indicator

6. Signal Strength indicator

7. Unit indicator

Overview:

8. Minimum Measurement indicator

9. Distance Measurement indicator

10. Primary Display Area

11. Supplementary Display Area

Inserting/Replacing Batteries

Open the battery compartment and insert the batteries in it and then shut
the compartment with the lid.

When battery is low，a battery indicator icon will be displayed on the

screen to remind you to replace the batteries.

·Pay attention to the polarity symbols marked inside of the

compartment.

· Only 1.5V AAA alkaline battery is allowed.

·Remove the batteries if you are not going to use the instrument in a

long time(to avoid leak of erosive chemical substance from the

batteries).

Start，Menu

Turn on/ Turn off Instrument

Turn on: Press the button to turn on the device.

Turn off：Long press the button to turn off the device.

Clear Off Button

Press the “Clear Off” Button to delete the latest measurement.