Hoist Fitness RS-1401 User Manual
RS-1401
LEG EXTENSION
Note: Both Serial Number and Model Number are Required when Ordering Parts
Customer Service
(800) 548-5438
(858) 578-7676
Fax
(858) 578-9558
OWNER'S MANUAL
RECORD SERIAL NUMBER HERE
CATALOG NUMBER
0406 - 012
OWNER'S MANUAL
CONTENTS
INSTRUCTIONS .....................................................................
FRAME ASSEMBLY ..............................................................
PRE-ASSEMBLY....................................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
ABBREVIATIONS...................................................................
BOLT SIZING CHART............................................................
WASHER SIZING CHART......................................................
MAINTENANCE SCHEDULE.................................................
02
04
18
19
20
21
24
25
27
29
GENERAL MAINTENANCE INFORMATION........................
WEIGHT TRAINING TIPS.......................................................
WEIGHT RATIOS....................................................................
EXERCISE LOG......................................................................
LIMITED WARRANTY............................................................
31
33
34
35
36
PAGE 01
RS-1401 ASSEMBLY
OWNER'S MANUAL
INSTRUCTIONS
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
TOOLS REQUIRED
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
PAGE 02RS-1401 ASSEMBLY
OWNER'S MANUAL
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
PAGE 03
RS-1401 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
RS-1401 ASSEMBLY
PAGE 04
OWNER'S MANUAL
FRAME ASSEMBLY
*ASSEMBLE WEIGHT CAGE FIRST*
NOTES:
- WRENCH TIGHTEN HARDWARE.
- INSTALL CABLE AND PULLEYS AT
THE SAME TIME.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
ENSURE THE USE OF WIEIGHT
STACK #2 WITH STAND OFFS.
86
18
81
3
81
132 3/4" 3372
77
87
18
70
80
80
85
81
25
77
PAGE 05
RS-1401 ASSEMBLY
71
81
13
OWNER'S MANUAL
FRAME ASSEMBLY
NOTES:
- WRENCH TIGHTEN HARDWARE.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
87
54
81
86
86
81
18
25
8186
3
85 80
81
11
80 69
94
81
92
RS-1401 ASSEMBLY
76
59
PAGE 06
STEP 1
78
80
OWNER'S MANUAL
FRAME ASSEMBLY
12
NOTES:
- WRENCH TIGHTEN HARDWARE (73).
THEN LOOSEN NUT JUST ENOUGH
FOR (5) TO PIVOT FREELY.
- WRENCH TIGHTEN ALL OTHER HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
STEP 2
49
11
80
85
94
64
81
86
5
81
PAGE 07
73
45
11
RS-1401 ASSEMBLY
64
OWNER'S MANUAL
FRAME ASSEMBLY
NOTES:
- WRENCH TIGHTEN HARDWARE (73).
THEN LOOSEN NUT JUST ENOUGH
FOR (1) TO PIVOT FREELY.
- WRENCH TIGHTEN ALL OTHER HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
1
45
94
12
86
85
81
5
80
73
81
49
80
RS-1401 ASSEMBLY
78
PAGE 08
OWNER'S MANUAL
FRAME ASSEMBLY
NOTES:
- WRENCH TIGHTEN HARDWARE.
- INSTALL CABLE AND PULLEYS AT THE
SAME TIME.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
85
69
1
80
25
18
80
25
PAGE 09
RS-1401 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
51
86
81
81
1
NOTES:
- WRENCH TIGHTEN HARDWARE (72 & 75).
THEN LOOSEN NUT JUST ENOUGH
FOR (2 & 4) TO PIVOT FREELY.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
72
60
18
86
52
2
44
41
86
81
4
81
75
52
81
75
RS-1401 ASSEMBLY
PAGE 10
OWNER'S MANUAL
FRAME ASSEMBLY
NOTES:
- WRENCH TIGHTEN HARDWARE (65, 63 & 75).
THEN LOOSEN NUT JUST ENOUGH
FOR (7, 8 & 27) TO PIVOT FREELY.
- WRENCH TIGHTEN ALL OTHER HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
8
86
84
86
84
1
79
27
7
65
79
50
81
92
81
63
PAGE 11
92
RS-1401 ASSEMBLY
Loading...