Hoist Fitness RPL-5305 User Manual
RPL-5305
OWNER'S MANUAL
ADDENDUM
READ THIS FIRST!
THE FOLLOWING PAGES WILL SUPERCEDE THE
EXISTING PAGES IN THE RPL-5305 MANUAL
CATALOG NUMBER 0608-000
Note: Both Serial Number and Model Number are Required when Ordering Parts
RECORD SERIAL NUMBER HERE
RPL-5305 ADDENDUM
Customer Service
(800) 548-5438
(858) 578-7676
Fax
(858) 578-9558
OWNER'S MANUAL
FRAME ASSEMBLY
23
NOTE:
- WRENCH TIGHTEN HARDWARE.
21
56
65
RPL-5305 ASSEMBLY
PAGE 20
51
STEP 1:
OWNER'S MANUAL
MACHINE ADJUSTMENT
MAJOR ADJUSTMENT:
STEP 1:
BE SURE THE BOTTOM DUAL HOLE BUMPER (53) OF THE
LIFT ARM ASSEMBLY REMAINS IN CONTACT WITH THE
BASE FRAME ASSEMBLY (13), AS SHOWN.
STEP 2:
ADJUST HEIGHT OF THE LIMITING STOP ASSEMBLY
(9) SO THAT IT IS IN CONTACT WITH THE DUAL HOLE
BUMPER (53), AS SHOWN. ONCE THE LIMITING STOP
IS PROPERLY ADJUSTED, WRENCH TIGHTEN JAM
NUT (27).
135
NOTE:
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
28
STEP 2:
135
109
PAGE 27
RPL-5305 ASSEMBLY
OWNER'S MANUAL
MACHINE ADJUSTMENT CONTINUED
MAJOR ADJUSTMENT:
LOOSEN JAM NUTS (28, 29) AND TWIST TIE RODS (16)
IN/OUT TO ADJUST THE PRESS ARMS TO THE PROPER
HEIGHT. ONCE THE PROPER HEIGHT IS REACHED AND
THE PRESS ARMS ARE OF EQUAL HEIGHTS, BE SURE
TO RE-TIGHTEN JAM NUTS.
28
33" [780mm]
16
29
RPL-5305 ASSEMBLY
PAGE 28
OWNER'S MANUAL
PART LIST
NOTE: SOME OF THESE PARTS MAY COME PRE-INSTALLED
ITEM NO. PART NUMBER DESCRIPTION QTY
1 026-01PL2236 TOP CAP W/INSERTS 1
2 026-01X3294 REAR UPRIGHT LEFT ASSEMBLY 1
3 026-01X3377 REAR UPRIGHT RIGHT ASSEMBLY 1
4 026-01X2402 FOOT PLATE ASSEMBLY 2
5 026-01X2849 RACHET PULL-PIN ASSEMBLY 1
6 026-01X2975 FOOT PLATE MOUNT ASSEMBLY 2
7 026-01X3235 CENTER UPRIGHT 1
8 026-01X3287 SHAFT, LIFT-ARM ASSEMBLY 1
9 026-01X3292 LIMITING STOP ASSEMBLY 1
10 026-01X3305 WEIGHT HORN ASSEMBLY 2
11 026-01X3308 LINK ASSEMBLY 2
12 026-01X3404 LIFT ARM DECLINE 1
13 026-01X3409 BASE FRAME ASSEMBLY 1
14 026-01X3411 PRESS ARM RIGHT 1
15 026-01X3412 PRESS ARM LEFT 1
16 026-01X3413 PRESS ARM LINKS 2
17 026-01X3414 LINK MOUNT - LEFT 1
18 026-01X3416 TIE-ROD END LEFT HANDED 2
19 026-01X3417 LINK MOUNT - RIGHT 1
20 026-01X3420 TIE-ROD END RIGHT HANDED 2
21 026-01X2387 SEAT PAD ASSEMBLY 1
22 026-01X3429 USER SUPPORT FRAME ASSEMBLY 1
23 022-01PD2054-A SEAT PAD ASSEMBLY 1
24 022-01PD2055 UPHOLSTERED HEAD PAD 1
25 022-01PD2058 UPHOLSTERED BACK PAD 1
26 011-0111008 SET SCREW: 1/4"-28 X .25" LG. (WZ) 4
27 012-0202001 1/2"-13 FLANGED NUT (WZ) 1
28 012-0105009 12 mm JAMNUT RH 2
29 012-0105010 12 mm JAMNUT LH 2
30 014-0019005-2 SPLIT COLLAR: 1.00" I.D. X 20mmT NON-THREADED 1
31 014-0009007 BEARING: FLANGED Ø2.00" O.D. X Ø1.00" I.D. 4
32 014-0005001 BEARING: (SMALL) Ø1 3/8"" O.D. X Ø3/4"" I.D. 4
33 014-0012013 BEARING: BALL BEARING Ø2.44" O.D. X Ø1.18" I.D. 4
34 016-0001003 END CAP 1.50" X 2.50" (BLACK) 1
35 022-01PD2058-5 PLASTIC BACK PAD BACKING 1
PAGE 33
RPL-5305
PLATE-LOADED DECLINE CHEST PRESS
**WARNING !**
TO PREVENT POSSIBLE TIPPING, BOLT THIS UNIT TO THE
EXERCISE FLOOR. FAILURE TO DO SO MAY RESULT IN SERIOUS
INJURY OR DEATH.
Note: Both Serial Number and Model Number are Required when Ordering Parts
Customer Service
(800) 548-5438
(858) 578-7676
Fax
(858) 578-9558
OWNER'S MANUAL
RECORD SERIAL NUMBER HERE
CATALOG NUMBER
0608 - 001
OWNER'S MANUAL
CONTENTS
INSTRUCTIONS .....................................................................
FRAME ASSEMBLY ..............................................................
MACHINE ADJUSTMENT .....................................................
PRE-ASSEMBLY....................................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
ABBREVIATIONS...................................................................
BOLT SIZING CHART............................................................
WASHER SIZING CHART......................................................
02
04
27
29
30
31
33
36
37
39
MAINTENANCE SCHEDULE.................................................
GENERAL MAINTENANCE INFORMATION........................
WEIGHT TRAINING TIPS.......................................................
EXERCISE LOG......................................................................
LIMITED WARRANTY............................................................
41
42
43
44
45
PAGE 01
RPL-5305 ASSEMBLY
OWNER'S MANUAL
INSTRUCTIONS
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
TOOLS REQUIRED
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
Two People
RPL-5305 ASSEMBLY
PAGE 02
OWNER'S MANUAL
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
PAGE 03
RPL-5305 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
RPL-5305 ASSEMBLY
PAGE 04
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- HAND TIGHTEN HARDWARE.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
3
9
73
2
27
58
13
50
51
PAGE 05
58
81
RPL-5305 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
69
49
12
10
57
61
69
61
57
10
49
RPL-5305 ASSEMBLY
PAGE 06
OWNER'S MANUAL
FRAME ASSEMBLY
12
NOTE:
- WRENCH TIGHTEN HARDWARE.
72
57
8
62
13
30
PAGE 07
57
80
RPL-5305 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
NOTE:
- WRENCH TIGHTEN HARDWARE.
74
74
58
58
81
58
12
19
17
58
81
RPL-5305 ASSEMBLY
PAGE 08
75
58
OWNER'S MANUAL
FRAME ASSEMBLY
81
58
NOTE:
- WRENCH TIGHTEN HARDWARE.
- SOME PARTS MAY HAVE BEEN
REMOVED FOR CLARITY.
- REPEAT ASSEMBLY FOR OPPOSITE SIDE.
12
19
17
PAGE 09
RPL-5305 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
3
NOTE:
- HAND TIGHTEN HARDWARE.
2
81
58
7
76
58
58
76
RPL-5305 ASSEMBLY
81
58
39
13
PAGE 10
Loading...