Hoist Fitness H2200-B Owner's Manual

H2200-B

MULTI-FUNCTION GYM

TO PREVENT POSSIBLE TIPPING, BOLT THIS UNIT TO THE EXERCISE

FLOOR USING MINIMUM 4-1/2” LENGTH BOLTS. FAILURE TO DO SO

MAY RESULT IN SERIOUS INJURY OR DEATH.

A10

**WARNING!**

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

CONTENTS

INSTRUCTIONS……………………………..…………………...

FRAME ASSEMBLY……………………..………..………….…

PRE-ASSEMBLY………………………………..……………….

DECAL PLACEMENT……………………….....………………..

ACCESSORIES……………………….....……………………….

DECAL REFERENCE………………...........….………….…….

PART LIST…………………………..……….…….…………..…

ABBREVIATIONS……………………..……….………….……..

BOLT SIZING CHART…………………………………………...

WASHER SIZING CHART…………….….…….……………....

02

04

48

51

52

53

56

60

61

62

MAINTANENCE SCHEDULE…………..………….………..….

GENERAL MAINTANENCE INFORMATION.............…….…

WEIGHT TRAINING TIPS…………………….……….………..

EXERCISE LOG…………………………………..……………...

LIMITED WARRANTY…………………………..……………….

64

65

66

67

68

PAGE 01 H2200-B ASSEMBLY

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

INSTRUCTIONS

Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.

HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.

TOOLS REQUIRED

Ratchet Wrench

1/2", 9/16" and 3/4" Sockets

Adjustable Wrench

Rubber Mallet

Tape Measure

Level

SAE Hex Key Wrench Set

Two People

H2200-B ASSEMBLY PAGE 02

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

***THIS PAGE WAS INTENTIONALLY LEFT BLANK***

PAGE 03 H2200-B ASSEMBLY

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

FRAME ASSEMBLY

H2200-B ASSEMBLY PAGE 04

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

FRAME ASSEMBLY

NOTE:

- HAND TIGHTEN HARDWARE.

-WRENCH TIGHTEN HARDWARE (111) AND (112)
THEN BACK OFF APPROXIMATELY ½ TURN OR
UNTIL (9) AND (21) PIVOT FREELY

-REST (36) ON GUIDE RODS. DO NOT SECURE
TO CENTER COLUMN AT THIS TIME

- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.

ADD LUBRICANT (136)
TO GUIDE RODS (46)

PAGE 05 H2200-B ASSEMBLY

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

FRAME ASSEMBLY

NOTE:

- HAND TIGHTEN HARDWARE

- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.

H2200-B ASSEMBLY PAGE 06

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

FRAME ASSEMBLY

NOTE:

- HAND TIGHTEN HARDWARE

-ITEMS MARKED WITH A (*) ARE INCLUDED WITH THE
HPA-1 PRESS ARM OPTION. PLEASE REFER TO HPA-1
MANUAL FOR FURTHER ASSEMBLY INSTRUCTIONS

- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.

PAGE 07 H2200-B ASSEMBLY

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

FRAME ASSEMBLY

NOTE:

- HAND TIGHTEN HARDWARE

-ITEMS MARKED WITH A (*) ARE INCLUDED WITH THE

HPA-2 PRESS ARM OPTION. PLEASE REFER TO HPA-2
MANUAL FOR FURTHER ASSEMBLY INSTRUCTIONS

- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.

H2200-B ASSEMBLY PAGE 08

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

FRAME ASSEMBLY

NOTE:

- HAND TIGHTEN HARDWARE

-REST (35) ON GUIDE RODS. DO NOT SECURE

TO CENTER COLUMN AT THIS TIME

- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.

ADD LUBRICANT (136)
TO GUIDE RODS (46)

PAGE 09 H2200-B ASSEMBLY

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

FRAME ASSEMBLY

NOTE:

- HAND TIGHTEN HARDWARE

-ENSURE (54) IS CENTERED ON (29) AND SECURE WITH (91) SET
SCREWS.

-ENSURE HANDLES (23) PIVOTS FREELY WHEN INSTALLATION IS
COMPLETE

- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.

H2200-B ASSEMBLY PAGE 10

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

NOTE:

- HAND TIGHTEN HARDWARE FIRST

- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.

FRAME ASSEMBLY

PAGE 11 H2200-B ASSEMBLY

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

FRAME ASSEMBLY

NOTE:

- HAND TIGHTEN HARDWARE FIRST

-WRENCH TIGHTEN (111) HARDWARE THEN BACK OFF

APPROXIMATELY ½ TURN OR UNTIL (40) PIVOTS
FREELY.

- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.

H2200-B ASSEMBLY PAGE 12

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

FRAME ASSEMBLY

NOTE:

- HAND TIGHTEN HARDWARE

- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.

PAGE 13 H2200-B ASSEMBLY

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

NOTE:

FRAME ASSEMBLY

- HAND TIGHTEN HARDWARE

-ENSURE (47) IS CENTERED ON (11) AND SECURE WITH
(131) SET SCREWS

-SET SCREWS MARKED WITH AN (*) IN THE DETAIL
VIEW TO THE RIGHT ARE PART OF THE PILLOW BLOCK
ASSEMBLY (79). FASTEN THEM AFTER (47) SHAFT HAS
BEEN CENTERED AND FASTENED WITH (131) SET
SCREWS.

- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.

H2200-B ASSEMBLY PAGE 14

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

FRAME ASSEMBLY

NOTE:

- HAND TIGHTEN HARDWARE

- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.

PAGE 15 H2200-B ASSEMBLY

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

FRAME ASSEMBLY

NOTE:

- HAND TIGHTEN HARDWARE

- WRENCH TIGHTEN (110) THEN BACK-OFF
APPROXIAMTELY ½ TURN OR UNTIL (13) PIVOTS
FREELY

- SOME PARTS MAY HAVE BEEN REMOVED

FOR CLARITY.

H2200-B ASSEMBLY PAGE 16

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

FRAME ASSEMBLY

NOTE:

- WRENCH TIGHTEN HARDWARE

- WRENCH TIGHTEN (113) THEN BACK

- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.

OFF APPROXIMATELY ½ TURN OR
UNTIL (61) PIVOTS FREELY

PAGE 17 H2200-B ASSEMBLY

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

FRAME ASSEMBLY

NOTE:

- HAND TIGHTEN HARDWARE FIRST

- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.

H2200-B ASSEMBLY PAGE 18

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

FRAME ASSEMBLY

NOTE:

- SOME PARTS MAY HAVE BEEN REMOVED
FOR CLARITY.

PAGE 19 H2200-B ASSEMBLY

OWNER’S MANUAL

OWNER’S MANUAL

OWNER’S MANUALOWNER’S MANUAL

FRAME ASSEMBLY

NOTE:

- HAND TIGHTEN HARDWARE

- SOME PARTS MAY HAVE BEEN REMOVED FOR
CLARITY

H2200-B ASSEMBLY PAGE 20