Hoist Fitness CF-3170 User Manual
CF-3170
OLYMPIC FLAT BENCH
Note: Both Serial Number and Model Number are Required when Ordering Parts
Customer Service
(800) 548-5438
(858) 578-7676
Fax
(858) 578-9558
OWNER'S MANUAL
RECORD SERIAL NUMBER HERE
CATALOG NUMBER
0407 - 000
OWNER'S MANUAL
CONTENTS
INSTRUCTIONS .....................................................................
ASSEMBLED SHIPPING POSITION .................................
FRAME ASSEMBLY ..............................................................
DECAL PLACEMENT.............................................................
DECAL REFERENCE.............................................................
PART LIST...............................................................................
ABBREVIATIONS...................................................................
BOLT SIZING CHART............................................................
WASHER SIZING CHART......................................................
MAINTENANCE SCHEDULE.................................................
02
04
05
09
10
11
12
13
15
17
GENERAL MAINTENANCE INFORMATION........................
WEIGHT TRAINING TIPS.......................................................
EXERCISE LOG......................................................................
LIMITED WARRANTY............................................................
18
19
20
21
PAGE 01
CF-3170 ASSEMBLY
OWNER'S MANUAL
INSTRUCTIONS
Before beginning assembly please take the time to read instructions
thoroughly. Please use the various lists in this manual to make sure that
all parts have been included in your shipment. When ordering, use part
number and description from the lists. Use only HOIST replacement parts
when servicing. Failure to do so will void your warranty and could result
in personal injury.
HOIST equipment is designed to provide the smoothest, most effective
exercise motion possible. After assembly, you should check all functions to
ensure correct operation. If you experience problems, first recheck the
assembly instructions to locate any possible errors made during assembly.
If you are unable to correct the problem, call your authorized HOIST dealer.
Be sure to have your serial number and this manual when calling. When all
parts have been accounted for, continue on.
TOOLS REQUIRED
Ratchet Wrench
1/2", 9/16" and 3/4" Sockets
Adjustable Wrench
Rubber Mallet
Tape Measure
Level
Hex Key Wrench Set
CF-3170 ASSEMBLY
PAGE 02
OWNER'S MANUAL
***THIS PAGE WAS INTENTIONALLY LEFT BLANK***
PAGE 03
CF-3170 ASSEMBLY
OWNER'S MANUAL
ASSEMBLED SHIPPING POSITION
NOTE:
IF PURCHACED ASSEMBLED, MACHINE 1.
MAY ARRIVE IN THIS ASSEMBLED
SHIPPING POSITION.
REMOVE HARDWARE SHOWN AND 2.
PROSEED TO PAGE 6 FOR REASSEMBLY
INSTRUCTIONS.
DISCARD ALL HARDWARE SETS WITH *.3.
19
*
15
17
*
18
*
15
*
17
15
*
7
15
13
*DISCARD PARTS BELOW*
OLYMPIC BENCH SHIPPING ADAPTER KIT
(ALL PARTS ARE TO BE DISCARDED
AFTER SHIPMENT AND SERVE NO OTHER
PUPOSE.)
ITEM NO. PART NUMBER DESCRIPTION QTY.
15 013-0102003 1/2" X 27mm SAE FLAT WASHER (WZ) 8
*
17 012-0304011 1/2"-13 UNC THIN NYLOCK NUT (WZ) 4
*
18 011-0107045 1/2"-13UNC X 1.25" HHB (WZ) 4
*
19 026-01X4022 CF OLYMPIC BENCH SHIPPING ADAPTER 1
*
CF-3170 ASSEMBLY
PAGE 04
OWNER'S MANUAL
FRAME ASSEMBLY
PAGE 05
CF-3170 ASSEMBLY
OWNER'S MANUAL
FRAME ASSEMBLY
17
15
7
NOTE:
- WRENCH TIGHTEN HARDWARE.
- WRENCH TIGHTEN CF OLYMPIC
BENCH UPRIGHT FRAME.
- REFER TO CF-OLYMPIC BENCH
UPRIGHT MANUALS FOR CAGE
ASSEMBLY.
13
1
15
2
11
PAGE 06CF-3170 ASSEMBLY
Loading...