Hoft & Wessel HW 8612 US User Manual
User manual
HW 8612 US
Radio Device
Version 1.00
All rights reserved. No part of this document may be translated, reproduced, stored in information
retrieval system, or transmitted in any form or by any means – electronic, mechanical, photocopying,
recording, or otherwise – without the prior written permission of the publishers.
All patent and utility models reserved.
© Höft & Wessel AG 2000
Subject to amendment, errors excepted
HW 8612 US
User manual
Version 1.00; 21.06.01
3
Table of contents
1 Introduction...............................................................................................4
1.1 Attendance and maintenance.............................................................5
1.2 Special note........................................................................................6
2 Product description..................................................................................7
2.1 HW 8612 views...................................................................................7
2.2 Included delivery.................................................................................7
2.3 Ports ...................................................................................................8
2.4 LEDs...................................................................................................8
3 Application example.................................................................................9
3.1 Using the HW 8612 as modem cable replacement.............................9
3.1.1 Hardware installation....................................................................9
4 Taking HW 8612 into operation .............................................................10
4.1 Installing the configuration software..................................................10
4.2 Configuration software......................................................................11
4.2.1 Step 1: Welcome........................................................................11
4.2.2 Step 2: Connect base station .....................................................11
4.2.3 Step 3: Base station settings......................................................12
4.2.4 Step 4: Connect mobile station...................................................12
4.2.5 Step 5: Mobile station settings....................................................13
4.2.6 Step 6: Ready.............................................................................13
5 Technical specification ..........................................................................14
User Manual
Version 1.00; 21.06.01
4
1 Introduction
The wireless HW 8612 Radio Device is the ideal solution when replacing V.24 cables by a radio connection or when addressing different peripheral devices via common interface.
The HW 8612 has a transmission rate of 115kbit/s and is provided
with an automatic error correction function; thus data transmission
is as reliable as with a common cable connection.
This manual describes the technical details of the HW 8612 as well
as its hard- and software. Furthermore, it explains how to take it into
operation and how it is currently used.
In case of problems during the installation or during the operation of
the HW 8612 that cannot be solved with the information given in
this manual, please contact the service department of your local
dealer or contact the Höft & Wessel-service line directly under
Service-Line@hoeft-wessel.de.
User manual
Version 1.00; 21.06.01
5
1.1 Attendance and maintenance
The HW 8612 does not require maintenance work or special attendance, except for the instructions mentioned below.
♦ Do not operate device within the range of strong electromag-
netic fields.
♦ Notice the temperature range for operation given in chapter 5
Do especially avoid overheating.
♦ Protect device against humidity and dust.
♦ Do clean device only with a soft wet cloth and mild cleaning
agent.
♦ Do not insert objects which do not correspond to the correct
application purpose into openings of the device. (This could
destroy electronic components).
NOTE!
Do not open the HW 8612
The HW 8612 does not contain parts which can be maintained,
exchanged or repaired by the customer or non-authorised
maintenance personnel.
Opening the device might damage the electric components. A
correct function of the device is no longer guaranteed!
Loading...