HOCHICHUANG TECHNOLOGY ZT WE01 User Manual

ZT-WE01说明书 工艺要求： 纸张:80g书纸 印刷:2+2 工艺 风琴折 成品尺寸:75x130mm

ZT-WE01

User Guide

High-quality stereo bluetooth headphone

ZT-WE01

Stereo bluetooth headphones

Please keep and read this manual carefully before use the headphone.

Note the following items:

1.Please use the reasonable control of the time and the volume of the
headphone.

2.If the environment （such as thrunder storm）are potentially
dangerous, please stop using to ensure safety.

3.Don't use the headphones to listen to music or calling or while driving
in potentially dangerous environment, in order to avoid distracting.

4.Place the headphone out of the reach of children to avoid improper
use may caused deadly danger.

5.Do not watering inside the headphone, to avoid sound or electronic
damage.

6.Continue to increase the volume should be avoided cause you do not
hear the sound around,such as tinnitus or turn up the volume to high,
please transferred to the appropriate volume.

7.Feels obvious discomfort, irritation or other adverse reactions, should
stop using immediately.

Warning:

1.While in charging process please don't use, to avoid electrocuted

2.Built-in rechargeable battery is not removable. Do not try to remove
battery from headphone, otherwise it could be damaged.

Charging:

1.While charging ,the headphone power will be shuted down.

2.Plug micro usb in the headphone USB jack, then connect with
computer usb hub or adaptor. red led lights are always bright.

3.Charging time is 2 hours; Blue lights are always bright after full
electricity.

Frequently question：

Button have no function:Please use the palyer witch is the smart
phone's player .Can't start : take off the USB charging.

ZT-WE01 ZT-WE01 ZT-WE01

Function Buttons:

V+/Last track

MF Button

V-/Next track

Microphone&LED lights

Micro USB

Package list

Stereo Bluetooth Headphone 1PC ZT-WE01 User Manual 1PC
USB Charging Cable 1PC

ON & OFF:

1.In the OFF state, press MF button for 2 seconds (Blue LED flash while
"POWER ON" voice prompts).

2.In the ON state, press MF button for 3 seconds (red LED lighted on
while "POWER OFF" voice prompts).

Bluetooth pairing steps:

1.Connect Bluetooth headphone to your moblie (or other device used
for connection) in the range of 1m

2.In the OFF state, press MF button for 5 seconds ,noted "POWER ON"
and “Pairing”then open the Bluetooth function of your mobile.

3.Search and choose “ZETVA WE01”to connect.

PS. NOTE:

1.If headphone had paired ,under the off states press MF button" for 2
seconds to power on it will reconnect the last used device automatically，
also if the headphone have no device to reconnect ,after 10 seconds it
enter the pairing mode automatically, it good at use a new device to pair,
absolutely you can press "MF button" for 5 seconds to enter the pairing
mode directly then repeat the up.

“bluetooth pairing steps”.

2. Pairing time lasts for 5 minutes, if time out it will power off
automatically, repeat use it please restart.

Disconnected and reconnecting:

1. Bluetooth will disconnect when the distance is beyond the Bluetooth
receiving range. Red and blue LED lights will flash alternately, and
"disconnected" prompt voice will appear, then "pairing" prompt voice will
appear. After disconnecting more than 5 minutes, the headset will
automatically shut down, and within 3 minutes the headset can
automatically connect back to the phone, and "connected" prompt voice
appear.

2.If select shut down the mobile bluetooth function to disconnect, the
headphone will enter the pairing mode automatically.

Phone Call Pick-up:

Click the "MF button" to answer the call.

Phone Call Hang-up:

During a call, short press the "MF button" to end the call.

Phone Call Reject:

Hold down the MF button for 1 second.

Call Waiting:

During a call, when a second incoming calls, double-click the MF once
to hold the first call and answer the second call, Then double-click the
MF button" again to hold the second call and answer the first call. Click
the MF button" to end the current call and turn call to the second party.

Connect Two Mobiles:

1.After connected with the first mobile, turn off the headphone, then long
press "MF button" for 5 seconds until enter the pairing mode, open
bluetooth function of the second phone, search for bluetooth devices
and click "ZETVA WE01" to complete the connection; find "ZETVA
WE01" on the first mobile and click to connect.

2.When the first mobile calls, press the "MF button" to answer the phone
call; When the second mobile calls, double-click the MF button to hold
the first phone call and answer the second call.

3.Double-click "MF button" to switch calls between two mobile.

4.Short press the "MF button" one time to hang up the current call and
recover a call on hold.

Last number redial:

In any mode, double-click "MF button" to redial the last number.

Voice Dialing:

Press and hold "MF button" 1 second .（Option）

Playing/Pause:

Playing music mode, click the "MF button" for playing or pause.

Music Selections:

Playing music mode, double-click "volume -" to jump to the next song,
double-click the "volume +" to jump to the previous song.

Volume Control:

Call or playing music mode, press and hold or short press "volume +"
and "volume -" to adjust the volume.

Reset

After power on (Except for playing mode ),Press and hold"VOL+"&"VOL-"
3S to reset,After resuming the factory, the machine will be rebooted.

Change the prompt language

Under the pairing mode, double-click MF button" , it indicator change
successfull.

Low voltage alarm:

“Battery low” warning note when the battery voltage is less then 3.4V.

Specification:

Working Range: 10 M Frequency: 20Hz-20KHz

Input Voltage:
Battary: 3.7V/80mAh Support: A2DP/AVRCP/HSP/HFP
Charge Temperature:0 -45℃ Working Temperature: -10 -60℃
Bluetooth version:4.2 Net Weight: 18g

ZT-WE01

NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to
which the
receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment. This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.

5V 500mA Impedance: 16Ω Speaker: φ10mm