Hobbico FLITT Users Manual

this will become second nature. towards or away from you. With practice, you may nd that moving left moves Flitt were sitting inside Flitt. So, if you rotate, The orientation of the controls are as if you

for any slight drift. there are ne tune buttons to compensate one direction and hold. For indoor ight, right. If you want to rotate constantly, swipe let go. To rotate, swipe the screen left or control, make small movements and then control the position of Flitt. For easiest slide bar, and left/right swipe area to Use the directional control stick, altitude

Buttons Fine Tuning

Controls

sent over your chosen service. ight (for iOS) or after (for Android), your pictures will be share 2. Next, take pictures or videos as you y. During your When ready to y, rst select either instant share 1 or instant

selected service. take another picture. You’ll be prompted to sign in to your

e loads your pictures or videos to your favorite

the main screen and select the instant share button and then to use and how you want to add a caption. Then go back to to Settings and choose which social media service you want social media quickly. You can set this up before you y. Go This featur

Flash

Instant Share

and the Start Up slide show. the sensors, access the help menus customize Flitt, manually calibrate

om this menu, you can set up and

Settings

Gallery

oom to y,

slider in small movements.

Memory Card Capacity

One-tap Take Off/ Land

Battery

Safety Unlock

Wi-Fi

For framing up and down, use the altitude you can easily frame your perfect shot! open screen area. This rotates Flitt so that screen from side to side by swiping the

ou can move the image you see on the

Frame your subject

to take. the camera will see the picture you want swiping the screen. This rotates Flitt so be moved to the left or the right by the Flitt camera sees. The image can This part of your screen shows you what

Screen Gesture Swipe Control

Slide Bar

rotate the camera

Swipe left or right to

Emergency Landing

use high (H) speed to y fast. indoors. If you have plenty of r Use low (L) or medium (M) speeds Push this icon to adjust your ight speed.

Speed Selector

the square icon. icon. To stop, push video, select the video To start recording a

Video Record

Altitude

you want to take in a burst. then choose the number of pictures the camera icon. Choose Burst, and Multi-picture Burst: Push and “hold” timer and then either 3S or 10S. and “hold” the camera icon. Choose your mobile device. Self-Timer: Push or the up/down volume button on

ess the camera icon

Single shot: Pr

Camera

Safety Precautions

• Adult supervision required.

• Always install the propeller guards before ying.

• Calibrate the Flitt acceler ying session.

• Do not touch the spinning pr

Keep your face and body as well as all spectators

•

away fr

• Stay clear of buildings, high voltage wir shrubbery or gr

• Don’ wind, rain, or snow

• Operating T (0ºC to 40ºC).

• Always keep Flitt in your line of sight.

• Maintain a safe pilot-to-device distance while ying.

• Flitt is not a toy possibly cause injury to you or spectators and damage to pr

• Do not alter or modify unsafe or unyable.

• Y every ight to insur structurally sound.

om the propellers.

oups of people.

t y in bad weather conditions, such as in high

emperature Range: 32ºF to 104ºF

. If not operated correctly, it could

operty.

ou must check the operation of Flitt before

ometers before each

opellers.

es, trees,

, as doing so may make it

e that it has remained

Battery Pr

The Flitt is equipped with a r

™

Quick Start Guide

See setup and Flying instructions inside.

3.7V Lithium Polymer (LiPo) battery Please pay attention to the following cautions for safe use:

• KEEP OUT OF REACH OF CHILDREN.

• LiPo batteries must be r

• Do not use this pr crashed and the battery possibly damaged.

• Never disassemble, puncture or modify the Flitt battery.

• Always turn off Flitt power after each use.

• Only charge using a USB 5.0V 2A max power supply.

• Do not charge inside your car.

• Do not leave unattended while charging.

• Allow Flitt to cool for 30 minutes before recharging.

• Always place Flitt on a reproof surface while charging.

• Keep away from combustible materials while charging.

• Unplug the charger immediately if it or the battery becomes hot! However, it is normal for the charger and battery to get warm. Disconnect from the charger and quickly move to a reproof location if the battery begins to get hot or smoke!

• Keep a supply of sand accessible when charging. Dumping sand on the battery will extinguish a LiPo chemical re.

• Always disconnect the charger after charging is complete.

ecautions

echargeable

ecycled or disposed

oduct if the Flitt was severely

of pr

operly.

ittcamera.com

Setup

1: Charge the battery 2: Download the app

Unlock the battery.

Grip the battery from the sides and push up.

4: Open the arms

Open the arms fully

Plug the charger into any standar USB power source.

The LED will be solid while charging. The LED will ash when nished. Always disconnect when nished.

5: Attach the propeller guards 6: Connect your phone 7: Open the app

Install a prop guard into the end of each arm. Match A guards to A arms and B guards to B arms.

Insert the battery and lock in place.

Go to Wi-Fi Settings on your phone and look for the network Flitt-******. Connect and enter Password: 12345678

Search the app stor

Apple and the Apple logo are trademarks of Apple Inc., r

egistered in the U.S. and other countries. App Store is a service mark of Apple Inc. Android and Google Play are trademarks of Google Inc.

-F

o tw

e for “Flitt.”

3: T

n on

Push the power button and hold for a few seconds until the LED stays on.

Watch the slide show to learn about the controls and features.

Fly

1: Get Ready. 2: Controls

Position Flitt on a level surface with the camera facing you.

Push “unlock” and hold for 2 seconds

Calibrate the sensors if prompted.

Push “Take of

f” when green. For your safety, Flitt will re-lock after ve seconds to prevent unintentional takeoffs.

Move slider to change altitude.

Move controls in the dir want to travel.

ection you

6.5 feet [2M]

In settings, you can set the camera to face

away from you to captur

e scenery.

We recommend recalibrating the sensors after a hard landing or crash.

Access this feature through the settings menu.

3: Land 4: Power off

Push and hold until the LED turns off.

s easiest to fold up Flitt

TAP

o land immediately

, push

Land

EMERGENCY

It’ starting with the back arms rst. Now head out to your next photo shoot!

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions.

(1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement:

• This equipment complies with FCC radia

• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

• This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

ISEDC RSS Warning

This device complies with ISEDC licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference (2) this device must accept any interference,including interference that may cause undesired operation of the device

Le présent appareil est conforme aux CNR d'ISEDC applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

ISEDC Radiation Exposure Statement:

• This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment.

• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

• This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

• Cet appareil est conforme aux limitesd’exposition de rayonnement RF ISEDC établiespour un environnement

• Cetémetteur ne doit pas être co-implanté oufonctionner en conjonction avec toute autreantenne ou transmetteur non controlé.

• Cet équipement doit être installé et utiliséavec une distance minimale de 20cm entre leradiateur & votre corps.

FCC ID: IYFFLITT IC: 11104A-FLITT

tion exposure limits set forth for an uncontrolled environment.

Hobbico FLITT Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual