Hobart Food Machines SP1500 Service Manual

Scale Printer System

Supervisor Manual

Supplement

Models

SP 1500

SP 21500

F - 33581

April 1996

SP Scale System

Using the Supplement Manual........................................................................1

Setting Up Metric Rule (For Net Weight).............................................................2

Using UPC Type 4...................................................................................... 10

Setting Up a Random Weight PLU ............................................................... 10

Setting Up a Fixed Weight PLU...................................................................10

Using 1.25" Description Labels....................................................................... 11

Selecting Date Line Options...........................................................................13

Configuring an Extra Digit of Net Weight ..........................................................16

Setting Up the Top Header Line ......................................................................17

Using the Custom Label ...............................................................................18

Working with FDA Approved Nutrifacts............................................................20

Enabling FDA NutriFacts to be Assigned to a PLU............................................ 20

Setting Up FDA NutriFacts Printing..............................................................22

Printing the PLU Number on the FDA NutriFacts Label ......................................23

Offsetting the FDA NutriFacts .................................................................... 24

Selecting a Footer Format.......................................................................... 25

Using Nutrition Templates for FDA1 ............................................................31

Using Nutrition Templates for FDA2 ............................................................34

Table of Contents Supervisor 4/96

Using the Supplement

Manual

SP Scale System

The following manual was created to use in conjunction with the current SP Supervisor Manual (F-17773 Rev. C). It is not intended to replace the existing manual. Firmware versions

-100, -200 and -300 are addressed in this supplement.

This manual tells you how to: ♦ Set up metric rule to enable net weight quantity to be

printed in appropriate units. This is not required for food packaged at the retail store level.

♦ Use UPC T ♦ Use the 1.25” (description) labels to print up to 4 lines of

text on label type 0.

♦ Select date line options to define which date fields to

print on the label.

♦ Configure an extra digit for net weight PLUs. This

enables you to print net weight to

♦ Set up the top header line of the date line to print on the

label.

e 4 to set up random or fixed weight PLUs.

1/10 graduations.

♦ Use a custom label to print a label with 26 lines of

expanded text.

♦ Work with FDA NutriFacts (and label capabilities),

including:

• Using nutrition templates for FDA1 (which is

compatible with SP -200, -2 through -5).

• Using nutrition templates for FDA2 (which is

atible with SP -300, Quantum and Ultima scales)

com

☛ Note

This software version can also be used with Models SP21500 Printer and 1812RS Slicer/Scale. Contact your Hobart Representative for scale installation and calibration.

☛ Note

After you make a change, you must reset the system to activate change.

1 Supervisor 4/96

SP Scale System

Setting Up Metric Rule (for Net Weight)

QUICK STEPS

From the Function Code Prompt:

1. Type 51 and PRESS

[ENTER].

2. PRESS [(▲)].

3. Enter 0, 1, or 2 at Metric

Rule prompt.

The Metric Rule setting enables the Net Weight quantity field to be printed in appropriate units. This option is not required for food packaged at the retail store level. Selecting 0 for metric rule will essentially turn metric rule off.

To set up the Metric Rule:

1. PRESS [SUPERVISOR]. If a Secret ID is set up, enter

your Secret ID. The Function Code prompt displays.

2. Type 51 and PRESS [ENTER]. The Bycnt Metho prompt

displays.

3. PRESS the [UP ARROW (▲)] key until you see the Metric

Rule prompt.

4. Enter 0, 1, or 2. The default is 0 (Zero). If your Metric Rule is set to 0, your net weight will print one weight type, for example ounces or grams. Refer to the tables, at the end of this section, for an explanation of each option.

5. PRESS [ENTER] to save changes and exit to the Function Code prompt. — OR — PRESS [ESCAPE] to exit without saving changes.

Metric Rule 0 — Ounces

Weight Prints Graphic Example

≤ 16 oz.

oz. only

Supervisor 4/96 2

Metric Rule 0 — Ounces

SP Scale System

Weight Prints Graphic Example

>16 oz but ≤ 64

oz. (lbs. and oz.)

>64 oz

lbs. and oz.

3 Supervisor 4/96

SP Scale System

Metric Rule 0 — Fluid Ounces

Weight Prints Graphic Example

≤ 16 oz.

fluid oz. only

>16 oz but ≤ 64 oz

>64 oz

fluid oz. (pints and fluid oz.)

pints and fluid oz.

Supervisor 4/96 4

Metric Rule 1 — Ounces

SP Scale System

Weight Prints Graphic Example

≤ 16 oz.

oz. (grams)

>16 oz.

lbs and 1/100 lbs. (grams) if weight is <1000 — OR — lbs and 1/100 lbs. (kilograms) if weight is ≥ to 1000g.

5 Supervisor 4/96

SP Scale System

Metric Rule 1 — Fluid Ounces

Weight Prints Graphic Example

≤ 16 oz.

fluid oz. (milliliters)

>16 oz. but <32

≥32 oz. but <128 oz.

pints (milliliters)

uarts (milliliters) if weight <1000 ml — OR — quarts (liters) if wei ml

ht is ≥ 1000

Supervisor 4/96 6

SP Scale System

Weight Prints Graphic Example

Metric Rule 2 — Ounces

≥128

Weight Prints Graphic Example

≤ 16 oz.

Gallons (liters)

grams (oz.)

>16 oz.

grams (lbs & 1/100 lbs) if weight is <1000 grams — OR — kilograms (lbs & 1/100 lbs) if weight is ≥1000 grams

7 Supervisor 4/96

SP Scale System

Metric Rule 2 — Fluid Ounces

Weight Prints Graphic Example

≤ 16 oz.

milliliters (fluid oz.)

>16 oz. but <32

≥32 oz. but <128 oz.

milliliters (pints)

milliliters (quarts) if weight <1000 ml —OR— liters (quarts) if weight is ≥ 1000 ml

Supervisor 4/96 8

Metric Rule 2 — Fluid Ounces

SP Scale System

Weight Prints Graphic Example

≥128

liters (gallons)

9 Supervisor 4/96

SP Scale System

Using UPC Number System 4

UPC number system 4 can be used with either random or fixed weight. When number system 4 is selected you are

rompted for the vendor and product number. This operates similar to types 0, 6 and 7, but it includes both random and fixed weight. Most sites will not utilize this option.

☛ Note

The following examples are for UPC Type 2; which is the factory default. If your system is configured for UPC Type 0 or UPC Type 1, you will notice slight differences from the following examples.

To change your UPC Type, contact your local Hobart Representative.

Setting Up a Random Weight PLU

To set up a random weight PLU with UPC number system 4:

1. PRESS [SUPERVISOR]. If a Secret ID is set up, the Enter

Secret ID prompt displays.

2. Enter

3. Type 10 and PRESS [ENTER] or PRESS [FILE UPDATE].

The PLU Code prompt displays.

4. Enter the PLU number. The New Record prompt displays

followed by the PLU? prompt.

5. PRESS [ENTER]. The Fixed Weight prompt displays.

6. PRESS [CLEAR]. The UPC -- (2 or 4) prompt displays.

7. Type 4 and PRESS [ENTER]. Vendor # prompt displays.

8. Enter the vendor number and PRESS the [DOWN

ARROW (▼)] key. The Product # prompt displays.

9. Enter the product number and PRESS the [DOWN

ARROW (▼)] key. The Description prompt displays.

Continue entering the appropriate information in the prompts that follow as described in the Supervisor Manual.

our Secret ID. The Function Code prompt displays.

Supervisor 4/96 10

+ 30 hidden pages