Page 1
Item # ________________________________
Quantity _______________________________
C.S.I. Section 11400
QE SERIES ROLL-IN
FOOD EQUIPMENT
STANDARD FEATURES
■ Designed for the Short-Term Storage of Hot
Foods at an Adjustable Temperature up to
180°F
■ Single Temperature Control Adjustable to 180°F
■ Forced Air Heat for Uniform Cabinet
Temperature
■ Safety Thermostat to Shut Heater Element Off if
Primary Temperature Control Fails
■ Constant Circulating Fan Maintains Uniform
Cabinet Temperature During Heater Off Cycle
■ Adjustable Humidity Control
■ Choice of Finishes:
❑ Stainless Steel Exterior and Interior;
❑ Stainless Steel Exterior, DuraFinish
Aluminum Interior
■ Solid Doors Field Rehingeable
HOT FOOD CABINETS
MODELS
❑ QEH1 – Single Section Unit
❑ QEHD1 – Single Section Roll-Through Unit
❑ QEH2 – Two Section Unit
❑ QEHD2 – Two Section Roll-Through Unit
❑ QEH3 – Three Section Unit
❑ QEHD3 – Three Section Roll-Through Unit
OPTIONS
❑ Electrical Specifications
❑ Interior Light
❑ Roll-Through
❑ Rear Cladding
❑ Side Heat Barriers
❑ Padlock Posts - Field Installed by Others
Specifications, Details and Dimensions on Inside and Back.
QE SERIES ROLL-IN HOT FOOD CABINETS
■ Exterior, Solar Powered Digital Thermometer is
Standard on all Cabinets
■ Easily Removable Door Gasket without the Use
of Tools
■ Non-Standard Door Hinging Available at No
Extra Cost
■ Stainless Steel Inclined Ramp or Stainless Steel
Flat Threshold Ramp
■ 115/60/1 Units have Ten Foot Cord and Plug
R
R
C
701 S Ridge Avenue, Troy, OH 45374 • 937-332-3000 • 1-800-333-7447
Page 2
QE SERIES ROLL-IN
HOT FOOD CABINETS
SELLING FEATURES
DOWN DUCT AIR DISTRIBUTION SYSTEM: Ensures
consistent cabinet temperatures.
FIELD REHINGEABLE DOOR: Maximum flexibility for
layout changes.
HEATING SYSTEM: Cabinet is equipped with forced air
heating system that utilizes a down duct air distribution
system that provides uniform temperature throughout the
cabinet. The commercial grade tubular heating element
and blower assembly are located outside of the interior
cabinet storage area. This design which does not have the
heating elements inside the food storage area provides
more usable cabinet storage space, and eliminates the
potential for personnel to have contact with a heating
element in the cabinet interior. The advanced heating
system is designed for energy efficiency, operator safety,
and to eliminate food safety issues.
EASILY REMOVABLE GASKETS: Solid door gaskets are
easily removed without tools for cleaning or replacement,
eliminating the expense of a service call.
CHOICE OF TWO FINISHES: Allows customer to choose
the best finish for their application. Units are available in:
stainless steel exterior and interior; stainless steel
exterior, DuraFinish aluminum interior.
ADJUSTABLE HUMIDITY CONTROL: The humidity
levels in the box can be controlled which allows for
adjustments for a variety of products.
WARRANTY: The QE series cabinet warranty is for two
years. It includes parts, labor, and travel during normal
working hours in the Continental United States.
Page 3
QE SERIES ROLL-IN
HOT FOOD CABINETS
DETAILS AND DIMENSIONS
ELECTRICAL DATA QEH1 QEH2 QEH3
Heater Wattage 800 1600 2400
Standard Voltage 120/60/1 120/208(3W)/60/1 120/208(3W)/60/1
Maximum Amps 8.0 9.0 13.0
Optional Voltages
PHYSICAL DATA QEH1 QEH2 QEH3
Net Cubic Feet of Capacity 35.3 74.2 113.2
Interior Dimensions 68"Hx301⁄2"Dx293⁄8"W 68"Hx301⁄2"Dx625⁄8"W 68"Hx301⁄2"Dx96"W
Depth over Hardware
Front Opening 37
Pass-Through 411⁄4"
Depth over Open Doors
Front Opening 6713⁄16"
Pass-Through 100"
Net Door Opening Height 68"
Net Door Opening Width 271⁄2"
Approximate Shipping Weight 500 lbs. 800 lbs. 1000 lbs.
120/208(3W)/60/1
120/240(3W)/60/1
120/240(3W)/60/1 120/240(3W)/60/1
9
⁄32"
Page 4
SPECIFICATIONS
CONSTRUCTION: The first letter(s) in each model
number indicates the series and finish.
QES: stainless steel exterior and interior
QESA: stainless steel exterior, DuraFinish aluminum
interior
After the series the sections, and if the unit is a passthrough, will be indicated by the following:
D: pass-through unit
1: one section
2: two section
3: three section
QESH SERIES
Exterior: Front housing, ends, and doors are No. 4 finish
stainless steel. Front door frame is stainless steel. Exterior
top, back, and bottom are galvanized steel.
Interior: Liner is crimped construction of No. 4 finish
stainless steel with
one piece stainless steel.
QESAH SERIES
Exterior: Front housing, ends, and doors are No. 4 finish
stainless steel. Front door frame is stainless steel. Exterior
top, back, and bottom are galvanized steel.
Interior: Liner is crimped construction of DuraFinish
aluminum with
finish stainless steel. Door drums are of one piece stainless steel.
HARDWARE AND FITTINGS: Heavy-duty, bumper-type
door handle positioned horizontally with cylinder locks.
Positive action door hinged mechanism fitted with stops
are chromium plated and are mounted to reveal full door
opening when door is open past 90 degrees. Door stays
open at 105 degrees, and self closes at less than
90 degrees. Solid doors are field rehingeable.
Door gaskets are of smooth, high quality vinyl and are
easily replaceable without the use of tools. Each unit is
equipped with a dial-type humidity control. Exterior, solar
powered, digital thermometer is standard on all cabinets.
Inclined exterior stainless steel ramp is provided as
standard.
3
⁄8" radius bends. Door drums are of
3
⁄8" radius bends. Liner bottom is No. 4
QE SERIES ROLL-IN
HOT FOOD CABINETS
HEATING SYSTEM:
ELECTRIC HEATERS: Cabinet is equipped with forced
air heating system that provides uniform temperature
throughout the cabinet. The commercial grade tubular
heating element(s) and blower assembly are located
outside of the interior cabinet storage area.
TEMPERATURE CONTROL: Temperature is controlled by
an adjustable thermostat that permits heat adjustment up
to 180°F.
HUMIDITY CONTROL: Cabinet is equipped with a dialtype control which allows easy, positive humidity control.
It consists of a venting tube that is governed by a rotating
knob on the face of the control panel. Maximum humidity
conditions inside the cabinet are obtained when the tube
is closed off completely, minimum when the tube is wide
open. Knob adjustments vary the humidity. (Two dial type
controls furnished on 3-section models.) All controls are
furnished on just one side of pass-through models.
ELECTRICAL SYSTEMS: Standard and optional electrical
specifications are:
1 Section - 800 watts:
STANDARD 120/60/1 - 8.0 amps
OPTIONAL 120/208(3W)/60/1 - 4.5 amps
120/240(3W)/60/1 - 4.0 amps
2 Section - 1600 watts:
STANDARD 120/208(3W)/60/1 - 9.0 amps
OPTIONAL 120/240(3W)/60/1 - 8.0 amps
3 Section - 2400 watts:
STANDARD 120/208(3W)/60/1 - 13.0 amps
OPTIONAL 120/240(3W)/60/1 - 11.5 amps
PLUMBING: No plumbing connections are required.
OPTIONS:
❑ Electrical Specifications
❑ Interior Light
❑ Roll-Through
❑ Rear Cladding
❑ Side Heat Barriers
❑ Padlock Posts - Field Installed by Others
Page 5
DETAILS AND DIMENSIONS – ROLL-IN UNITS
QE SERIES ROLL-IN
HOT FOOD CABINETS
One Section Front View One Section Top View
Two Section Front View Two Section Top View
Left Side View
Right Side View
Three Section Front View Three Section Top View
Page 6
Printed On Recycled Paper
QE SERIES ROLL-IN
HOT FOOD CABINETS
DETAILS AND DIMENSIONS – ROLL-THROUGH UNITS
One Section Front View One Section Top View
FOOD EQUIPMENT
Left Side View
F-8069 (2/01) LITHO IN U.S.A. (H-01)
Two Section Front View Two Section Top View
Three Section Front View
701 S Ridge Avenue, Troy, OH 45374 • 937-332-3000 • 1-800-333-7447
Right Side View
Three Section Top View
Loading...