Hobart Food Machines PD35 Installation Manual

POWER DRIVE UNIT

MODELS

PD35
PD70

701 S. RIDGE AVENUE

TROY, OHIO 45374-0001

937 332-3000

www.hobartcorp.com

F-35020 (October 2014)

Installation, Operation and Care of

Power Drive Unit

SAVE THESE INSTRUCTIONS

GENERAL

PD35/PD70 POWER DRIVE UNIT

The power drive unit is a self-contained power drive for certain attachments. It is supplied with a 6 ft.
grounding type electrical cord and an “On/Off” switch. It is designed to drive only the power dicer attachment
of the 9" slicer attachment with its slicer, shredder, or grater options.

The model PD35 has a 350 RPM drive speed and is designed to drive either the power dicer or the 9"
slicer attachments.

The model PD70 operates at 700 RPM and is designed to drive the 9" slicer attachment (with its options),
BUT NOT THE POWER DICER. An optional position is provided for the front legs to permit a slicer to
discharge over the edge of the table.

© HOBART, 2014

– 2 –

INSTALLATION

12-5/8

NET WEIGHT OF MACHINE - 57 LBS
DOMESTIC SHIPPING WEIGHT - 65 LBS

12-1/4

6-1/8

16-13/16
OPTIONAL
POSITION

19-1/2

OPTIONAL FRONT LEG POSITION

APPROX. 6 FT. CORD & PLUG FURNISHED

2-3/8

17

12-11/16

5-1/16

9-3/16

THERMAL MOTOR PROTECTOR

MANUAL RESET

(CANADIAN UNITS ONLY)

INSTALLATION DIAGRAM

– 3 –