Hobart Food Machines LXeH User Manual

Page 1
Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
LXe
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
STANDARD FEATURES
32 racks per hour – LXeH
34 racks per hour – LXeC
.74 gallons of water per rack
Hot water or chemical sanitation units available
Low chemical alert indicators
Sense-A-Temp™ booster heater capable of 70°
rise, provided on LXeH models
Delime notication with cycle
Chemical pump “auto-prime”
Service diagnostics
Deep drawn stainless steel tank
Microcomputer, top mounted controls with
digital cycle/temperature display
HOT AND COLD
MODELS
LXeC
LXeH
ACCESSORIES
Power cord kits
Stainless steel base with 6" legs
17" stainless steel stand with storage
External caster kit
DWT-L Xe drain water tempering kit
Specications, Details and Dimensions on Back.
Revolving upper and lower anti-clogging wash arms
Revolving upper and lower rinse arms
Removable stainless steel scrap screen
Corrosion resistant pump
Automatic pumped drain
17" door opening
Automatic ll
Detergent and rinse aid pumps standard
(plus sanitizer pump on chemical machine)
Electric tank heat
Two dishracks – one peg and one combination
type
STANDARD VOLTAGES
120/208-240(3W)/60/1 (LXeH model only)
120/60/1 (LXeC model only)
OPTIONS AT EXTRA COST
208-240(2W)/60/1 (LXeH model only)
208-240/60/3 (LXeH model only)
F40332 – LXe Hot and Cold Page 1 of 4
Page 2
LXeH HOT
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Page 2 of 4 F40332 – LXe Hot and Cold
Page 3
LXeC
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
COLD
F40332 – LXe Hot and Cold Page 3 of 4
Page 4
LXe HOT AND COLD
SPECIFICATIONS
DESIGN: Front opening, equipped for installation in either
freestanding or undercounter-type operations.
CONSTRUCTION: 300 series stainless steel tank, door and top panel.
PUMP: Centrifugal-type, integral with motor, horizontally mounted. Pump capacity 38 gpm.
MOTOR: Single phase, furnished for all electrical spec­ications. Factory sealed lubrication. Inherent overload protection with auto reset.
WASH AND RINSE CYCLE: Complete automatic type, controlled by solid-state electronics. Cycle may be inter­rupted any time by opening door. Cycle continues when door is closed.
• Initial cycle lls wash tank, to be recirculated each wash cycle. Some wash water is drained off before rinse cycle. Rinse cycle refreshes wash water and tank heat.
RINSE PUMP: Powered by a single phase motor, the rinse pump is made of high strength engineered composite material.
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
RINSE AND SANITATION:
LXeH: Sanitation is accomplished by means of a built-in booster heater designed to raise temperature of water to a minimum of 180°F from an incoming water tem­perature of 110°F.
LXeC: Sanitation is accomplished by injection of proper amount of sodium hypochlorite solution (liquid bleach) into nal rinse water to achieve a minimum of 50PPM sanitizing solution. Injection of sodium hypochlorite is accomplished by a built-in sanitizing chemical pump.
PUMPED DRAIN: Machine automatically drains water through a built-in pump. Maximum 38" drain height permitted.
RACKING: Machines accommodate racks from 10" x 20" to 20" x 20". Also accepts 16" x 18" cafeteria trays.
NOTE: Certain materials, including silver, aluminum and pewter are attacked by Sodium Hypochlorite solution in the chemical sanitizing mode of operation.
SPECIFICATIONS: Listed by Underwriters Laboratories Inc. and NSF International.
MACHINE RATINGS LXeC LXeH
Racks per Hour Rate 34 32
Dishes per Hour (25 per Rack Avg.) 850 800
Glasses per Hour (36 per Rack Avg.) 1224 115 2
Controls Microcomputer
Tank Capacity - Gallons 2.9
Overall Dimensions - H x W x D 321⁄2 " x 2315⁄16" x 259⁄16"
Cycle Time - Seconds 10 5 109
Tank H e a t 1.8 K W
Electric Booster Heater N/A 4.9 KW
Water Usage Per Rack - Gallons .74
Drain Design Pumped
Door Opening Height 17"
Detergent Pump Standard
Rinse-Aid Pump Standard
Sanitizer Pump Standard N/A
Chemical Prime (auto prime) Standard
Peak Drain Flow - GPM 4.0
Service Diagnostics Standard
70°Rise Sense-A-Temp™ Booster Heater N/A Standard
Incoming Water Temperature Required (minimum) 120° 110 °
As continued product improvement is a policy of Hobart, specications are subject to change without notice.
Page 4 of 4 F40332 – LXe Hot and Cold
F40332 (REV. 03/13) LITHO IN U.S.A. (H-01)
Loading...