Hobart Food Machines H600 Installation Manual
POURING CHUTE KIT PART #873122
INSTALLATION INSTRUCTIONS
WARNING:
PLACE A TAG ON THE CIRCUIT BOX INDICATING THE CIRCUIT IS BEING SERVICED.
1. Ask customer which one of the four mounting positions would satisfy their needs.
NOTE:
with arrows can be used to determine the mounting position. Once a position is selected and the lower chute
baffle is mounted,
DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AT THE MAIN CIRCUIT BOX.
The center of the upper chute has a slot which slides over the wire guard. Only the wire guards indicated
it cannot be moved
.
2. Install the lower baffle on the wires at the same position selected for the upper chute.
CAUTION: To prevent machine damage, the four tabs on the lower baffle must be formed around the
wires as shown to prevent baffle from coming off.
Form 24854 (1/4/99) Page 1 of 2
3. Install the upper chute on wires being sure to engage chute hooks on wires.
NOTE:
Upper chute can be removed when not in use. Lower baffle is not removable
.
Form 24854 (1/4/99) Page 2 of 2
Loading...