Hobart Food Machines FT900D User Manual
Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
FT900D DUAL RINSE
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
STANDARD FEATURES
■ Opti-RinSe™ system with dual rinse
■ Water usage 90 gph @ 20 psi
■ Microprocessor controls
■ Low temperature alert
■ Single point vent connection
■ 42" access doors on power wash and power
rinse chambers, 34" access doors on prewash
chamber, 24" access door on dual rinse chamber
■ Variable speed conveyor 4-8.5 fpm
■ Start and stop switches at both ends
■ Doors open indicator
■ Load end ush system
■ Door interlocks
■ 3 H.P. TEFC prewash, power wash and power
rinse pump motors
■ Easy to remove wash arms
■ Easy to remove scrap trays and baskets
■ 301⁄2" wide conveyor
■ Insulated hinged doors
■ Front and rear panels
FLIGHT-TYPE DISHWASHER
MODEL
❑ FT900D – Dual Rinse Flight-Type Dishwasher
OPTIONS AT EXTRA COST
❑ Energy Recovery – (will require a back
draft preventer)
❑ Electric Tank Heat
❑ Steam Tank Heat
❑ Booster Heater
❑ Electric
❑ Steam
❑ Blower Dryer
❑ Electric
❑ Steam
❑ 6" higher than standard chamber - 90 gph @
20 psi
❑ Prewash temperature control
❑ Insulated counterbalanced split sliding doors
option (not available on dual rinse door)
❑ Multiple conveyor choices
❑ Circuit breakers
❑ Other options available, consult factory
FT900D DUAL RINSE FLIGHT-TYPE DISHWASHER
DIRECTION OF OPERATION
❑ Right to Left
❑ Left to Right
VOLTAGE
❑ 208/60/3
❑ 240/60/3
❑ 480/60/3
❑ Other voltages available, consult factory.
LA Research Report #M660004
ACCESSORIES
❑ Feet
❑ Extended
❑ Flanged
❑ Water hammer arrestor/PRV.
Specications, Details and Dimensions on Inside and Back.
F40161 – FT900D Dual Rinse Flight-Type Dishwasher Page 1 of 12
FT900D DUAL RINSE
FLIGHT-TYPE DISHWASHER
DESIGN: Fully automatic, ight-type dishwasher
machine consisting of a load section with power
recirculating prewash, a 10 foot power wash, power
rinse, dual rinse and nal rinse section. Included with
each machine will be exible plastic strip curtains to
control over spray.
CONSTRUCTION: Stainless steel tank and chambers
with No. 3 polish on appearance surfaces. Frame,
legs and feet to be constructed of stainless steel.
Inspection doors to be chamber width. The 10 ft.
section includes the power wash, power rinse, dual
rinse, and nal rinse.
PUMPS: Recirculating stainless steel pumps with
stainless steel impellers. Pump housing has easy to
remove coverplate for access to impeller. All pumps
are self-draining. 150 gpm prewash; 292 gpm power
wash/power rinse, 8 gpm for dual rinse.
MOTORS: Totally enclosed fan cooled design, with
inherent overload protection. Prewash, power wash
and power rinse motors to be 3 H.P. each, conveyor
1
⁄2 H.P., 1⁄6 H.P. dual rinse motor. Available in electrical
specications of 208-240/60/3 and 480/60/3.
CONTROLS: A stainless steel control center with
electronic digital controls mounted at eye level.
Power “On/Off” and “Start/Stop” switches integrated
into keypad. Digital display indicates door(s) open,
low temperature alert, tank/nal rinse temperatures,
and other pertinent operating data. Additional “Start/
Stop” switches are located at each end of machine.
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
FLIGHT-TYPE CONVEYOR: Stainless steel side
links, tie rods and conveyor tracks. Injection molded,
resilient Duraex ight links.
VENT: Single built-in vent duct with dampers
mounted in cleanable cross duct.
RECIRCULATING PREWASH SECTION: Prewash
compartment is tted with upper and lower wash
arms. Prewash ush down for prewash tank bed.
Large removable one piece perforated stainless steel
screen sloped downward to deep stainless steel
scrap basket.
TANK HEAT: Power wash, power rinse, and dual
rinse tank water temperatures are thermostatically
controlled. Low water protection is provided. Specify
either electric or steam heat for the wash, rinse and
dual rinse sections.
DUAL RINSE/FINAL RINSE: Arms removable without
tools.
CONVEYOR DRIVE UNIT: Powered by a 1⁄2 H.P.
motor. Trip mechanism provided on unload section.
Jam protection is provided by load sensing switch at
drive platform. Conveyor speed adjustment of 4 fpm
to 8.5 fpm is provided in the main control box.
DRAINS: Manual, hand operated, located in each
tank.
No other control system allows easier
monitoring.
The controls are placed in a convenient panel that
lets operators verify proper operation and temperatures at a glance.
Digital display
indicates the unit
is on, and conrms
that the doors are
closed. Automatic
door interlocks
prevent the pump and conveyor from operating if the
doors are open. Easy-to-read digital display indicates
accurate temperatures of the 150°F wash, 160°F
power rinse, 160°F dual rinse and 180°F nal rinse —
critical for proper HACCP system record-keeping.
Page 2 of 12 F40161 – FT900D Dual Rinse Flight-Type Dishwasher
Stainless steel pump
is built for long life.
The stainless steel pump
housing and impeller
offer greater durability
and long life. The pump
motor is totally enclosed
and fan cooled (TEFC)
to protect it from water
spray during dishroom
clean-up. The pump
is also externally mounted to the frame for added
rigidity and easy access to the clean-out port.
FT900D DUAL RINSE
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Scrap baskets
capture food
particles and are
easy to clean.
The sloped screens
that carry scraps to
the scrap baskets
are steeper, so less
soil gets into the
tanks. The basket opening is larger for easy cleaning
and basket handles have been designed for easy liftout access.
The FT900D Series
saves water and energy.
The unit is designed to cut
water and energy usage,
yet provide effective
cleaning and sanitizing that
meet NSF International
requirements.
This is achieved through a
carefully balanced ratio of
water ow to pressure.
At 292 gallons per minute (gpm), the machine offers excellent wetting and
ooding over ware. Insulated doors also reduce heat
loss. The unit’s 1.5 gpm/90 gallons per hour of fresh
water rinse (the lowest in the industry on a standard
machine) and 8 gpm/480 gallons per hour of pumped
rinse saves both water and the energy to heat it.
Wider, variable speed conveyor offers
increased throughput.
The conveyor on the FT900D Series is wider so it can
handle more ware. Result: more volume and versatility, quicker work.
Its speed is servicer
adjustable for the
type of ware, soiled
condition, or workforce requirements.
It can be adjusted
from 4 to 8.5 feet
per minute.
FLIGHT-TYPE DISHWASHER
Optional Energy
Recovery system.
The optional Energy
Recovery system
captures escaping
heat and steam from
the exhaust air and
uses a heat exchanger to recycle it into energy.
This free energy is used to preheat the incoming
water supply before it enters the booster heater. The
cold ground temperature water passes through a
heat exchanger positioned directly in line with the
machine’s exhaust system to capture the energy
from the exhaust air to elevate the temperature of the
water to 128° before it enters the booster heater.
Flush arm keeps load
end clean.
The load end also has a
readily removable ush arm
to rinse food scraps into the
prewash area scrap basket.
Self-draining pumps help keep water clean.
Pumps are self-draining when the machine is shut
down, so there is no residual water left in the pumps.
Installation is quick and easy with modular
design, minimal wiring connections, and
single point vent.
Modular design means the FT900D installs quickly,
and reliably. Sections t through 42" doors. The
control panel is already in place, premounted to the
power wash/power rinse/dual rinse section.
Wiring connections
are minimal, and there
is only a single vent
connection, saving
time and expense.
The control box uses a
“single plane” circuitry
design for easy accessibility during installation and service. The FT900D is
ready to run quickly.
F40161 – FT900D Dual Rinse Flight-Type Dishwasher Page 3 of 12
FT900D DUAL RINSE
ELECTRIC L-R
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
Page 4 of 12 F40161 – FT900D Dual Rinse Flight-Type Dishwasher
Loading...