Hobart Food Machines BLA-1 Installation Manual
Bottom Label Applier
Instruction Manual
Models
BLA-1 ML - 44106 (Left to Right)
BLA-2 ML - 44145 (Right to Left)
701 S. RIDGE AVENUE
TROY, OHIO 45374-0001
937 332-3000
www.hobartcorp.com
F-33731B (Mar. 2000)
Bottom Label Applier (BLA)
SAVE THESE INSTRUCTIONS
Bottom Label Applier
24” Gravity Conveyor 27” Power Conveyor
☛ Note
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference; in
which case, the user will be required to correct the
interference at his own expense.
2
Bottom Label Applier
Bottom Label Applier
The Bottom Label Applier (BLA) is designed to apply a preprinted label to the bottom of a package. The label is applied
as the package passes over a 24” Gravity Conveyor or a 27”
Power Conveyor (used with the Hobart Roller Table or
other indexing equipment). There are two Bottom Label
Applier Models. The BLA1 is a left to right applier and the
BLA2 is a right to left applier.
3
Loading...