Hobart Food Machines AM15 Installation Manual
AM15 LP FIELD CONVERSION INSTRUCTIONS
This conversion kit shall be installed by a qualified servicer in accordance with
the manu facturer’s instructions and all applicable codes and requirements of the authority having jurisdiction. If the information in these instructions is not followed exactly, a fire, explosion or
production of carbon monoxide may result causing property damage, personal injury or loss of
life. The qualified servicer is responsible for the proper installation of this kit. The installation is
not proper and complete until the operation of the converted appliance is checked as specified in
the manufacturer’s instructions supplied with the kit.
00-948534 KIT TO BE USED ON AM15, AM15T and AM15F MODELS
All machines receiving this kit will be set up from the factory to use Natural Gas (NG)
This kit allows the machine to be converted in the eld to Liqueed Petroleum (LP, GPL, LPG)
00-948534 KIT CONTENTS:
1 0F-038429 Instructions
1 00-893149 Brass 7/16 x 20 orice marked LP
1 00-473532 Data Plate & 2-rivets
1 Plastic wire tie
1 00-328738 KIT, CONVERSION-LP.
1 BASO Y71 KIT, Regulator conversion:
1 Regulator spring
1 Seal screw
1 Caution Label
00-948534 KIT:
Page 1 of 4 F38429 (July 2013)© HOBART 2013
INSTRUCTIONS:
Disconnect the electrical power to the machine and follow lockout/tagout procedures.
1. Disconnect all power and gas lines from machine. Remove front & left side panels to expose gas components.
2. Remove 893896-1 pipe assembly from machine.
a) Loosen union and remove gas cock & associated plumbing
b) Disconnect electrical plugs on regulator and fan motor.
c) Cut cable tie securing plumbing to bracket
d) Remove pipe assembly below elbow
e) Unscrew remaining assembly at the burner by turning the elbow CCW.
c
e
d
e
a
Page 2 of 4F38429 (July 2013)
Loading...