Hobart Food Machines 1HG45M User Manual
Item # _____________________________________
Quantity ___________________________________
C.S.I. Section 11400
1HG45M
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
STANDARD FEATURES
■ Large cold zone area
■ Twin fry baskets with plastic coated handles
■ Behind the door snap action millivolt thermostat
control adjusts from 200° to 400°F with standing
pilot
■ Both Fahrenheit and Celsius scales
■ Millivolt system – requires no electric hook-up
■ Built-in ue deectory
■ Nickel plated tube rack
■ Earth magnet to secure closed door
■ Easily removable stainless steel basket hanger
for cleaning
■ Stainless steel fry tank, 45 - 50 lb. capacity
■ 11⁄4" full port ball type drain valve
■ Stainless steel cabinet
■ Set of four casters (two locking)
■ 120,000 BTU/hr. input
■ Four heat exchanger tubes positioned for easy
cleaning
■ High limit shut-off protector shuts off gas
combination valve and standing pilot
■ Tank brush, stainless steel crumb scoop and
clean-out rod
■ One year limited parts and labor warranty
■ Ten year limited fry tank warranty
GAS FRYER
MODELS
❏ 1HG45M: Behind the door millivolt thermostat
control adjusts from 200° to 400°F.
SPECIFY TYPE OF GAS
❑ Natural Gas
❑ Propane Gas
SPECIFY ALTITUDE
❑ Natural Gas above 2,000 ft.
❑ Propane Gas above 3,000 ft.
Specications, Details and Dimensions on Reverse Side.
1HG45M GAS FRYER
ACCESSORIES
❏ Frymate VX15 add on dump station
❏ Stainless steel tank cover doubles as a work
surface top
❏ Connecting kit(s) – Connect two fryers together
(banking strip, brackets and hardware included)
❏ Single large basket – 13"w x 131⁄4"d x 51⁄2"h
❏ Extra set of twin baskets – 61⁄2"w x 131⁄4"d x 6"h
❏ 10" high stainless steel removable splash guard
❏ Flexible gas hose with quick disconnect and
restraining device.
F-39774 – 1HG45M Gas Fryer Page 1 of 2
1HG45M
1HG45M
GAS FRYER
SPECIFICATIONS
CONSTRUCTION:
45 - 50 lb. capacity oor model gas fryer. Stainless steel
front, top, sides and door. Stainless steel fry tank with four
heat exchanger tubes and a “V” shaped cold zone. Set of
four casters (two locking), 1" full port ball type drain valve.
Twin fry baskets with plastic coated handles.
TANk SIzE:
14" x 14".
DETAILS AND DIMENSIONS
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
HEATING:
120,000 BTU/hr. input.
WORkING HEIGHT:
361⁄4".
APPROXIMATE SHIPPING WEIGHT:
215 lbs.
IMPORTANT
1. A combination valve with pressure regulator is provided with
this unit.
Natural Gas 4.0" W.C.
Propane Gas 10.0" W.C.
2. An adequate ventilation system is required for Commercial
Cooking Equipment. Information may be obtained by writing
to the National Fire Protection Association, Batterymarch
Park, Quincy, MA 02269. When writing refer to NFPA No. 96.
3. All models require a 6" clearance at both sides and rear
adjacent to combustible construction.
4. All models require a 16" minimum clearance to adjacent
open top burner units.
5. This appliance is manufactured for commercial installation
only and is not intended for home use.
SERVICE CONNECTIONS:
P1 1⁄2" ID (13 mm) and 3⁄4" OD (19 mm) rear gas connection
Front View
Side Views
OVERALL
MODEL WIDTH DEPTH
1HG45M 151⁄2" 301⁄4" 471⁄8" 361⁄4" 14" x 14" 120,000 45 - 50 lbs. 40 215 lbs.
*Based on 5 birds cut into 8 pieces
HEIGHT
WORkING
HEIGHT
E1 120 volt cord & plug, NEMA 5-15P, supplied on 1HG45C
fryer.
Top View
TANk
SIzE BTU/HR.
FRY
COMP.
CAPACITY
NO. OF
CHICkEN
PIECES*
APPROX.
SHIP. WT.
As continued product improvement is a policy of Hobart, specications are subject to change without notice.
Page 2 of 2 F-39774 – 1HG45M Gas Fryer
F-39774 (REV. 12/10) LITHO IN U.S.A. (H-01)
Loading...