HN Power HNP12-050-C Operation Manual [ml]

12 W
AC/DC
ADAPTER
12 Watt Value Power
HNP12 Steckernetzteil-Serie
Besondere Merkmale Features
Anwendung Application
Drahtlose Kommunikation Wireless communications Peripheriegeräte Peripherals Netztwerktechnik Networking Mobile Ausrüstungen Portable equipment Telekommunikation Telecom
Technische Daten Specification
(bei 25°C Umgebungstemperatur) at 25 °C ambient temperature
Eingangsdaten Input Specifications
Eingangsspannung Input voltages 90…264 VAC Eingangsfrequenz Input frequency 47…63 Hz Eingangsstrom Input current 450mA(rms) @ 90VAC Netzausfallüberbrückung Hold-up time, nom.conditions 20ms@115VAC Einschaltstromstoß Inrush current <30A/230VAC Leerlaufverlust No load power consumption max. 0.3 Watt
Ausgangsdaten Output Specificatio ns
Leistung Power 12 Watt Wirkungsgrad Efficiency > 75% Ausregelzeit ±2% Recovery time ±2% max. 1 ms Restwelligkeit Ripple and noise typ. 200mV pp
Allgemeine Daten General Specifications
Betriebstemperatur Operating temperature -5°C…+40°C Lagertemperatur Storage temperature −20°C…+70°C Luftfeuchte Humidity 5...95%RH Isolation Dielectric Withstand (Hipot) 3000VAC 1min inp.<->outp. Leckstrom Leackage current 0.25mA max.@240 VAC Überstromschutz Overcurrent protection continuous, auto restart Überspannungsschutz Overvoltage protection typ. 120 % Zulassungsbestimmungen Safety requirements TÜV EN60950-1:2006 +A14 (2009) EMV EMC EN 55022:2006;
EN 61000-3-2:2006;EN 61000-3-3:1995+A1:2001+A2:2005
1
EN 55024:1988+A1:2001+A2:2003;
12 Watt V a lue Power
12 W
HNP12 Steckernetzteil-Serie
Bestell-Information / Order Information
Modell Ausgang Last/Load
Output Min. Max.
HNP12-050 5 V 0.0 A 1.6 A HNP12-090 9 V 0.0 A 1.33 A HNP12-120 12 V 0.0 A 1.0 A HNP12-150 15 V 0.0 A 0.8 A HNP12-240 24 V 0.0 A 0.5 A Andere Spannungen / DC-Stecker auf Anfrage - Other voltages / DC-connectors on request
Vermerk
1-Restwelligkeit gemessen mit einer 25 cm verdrillten Leitung, welche mit einer 10 µF-Kapazität abgeschlossen
wird und zu einer 0,1 µF-Kapazität parallel geschaltet ist.
1-Ripple and Noise is measured by using a 12 inch twisted pair cable, terminated with a 10 µF capacitor and a
0.1 µF ceramic in parallel.
Mechanik Mechanical
AC/DC
ADAPTER
MEMO:
L×B×H L×W×H 63 × 27 × 80 mm Gewicht Weight 90 g DC-Stecker DC-connector 2.1 x 5.5 x 10 mm , inside positive, outside negative DC-Kabel DC-cable L=1500mm , UL2468 22AWG*2C
PIN-Belegung und Zeichnung / Pin Assignments & Drawing
Technical specifications are subject to change without notice.
Technische Änderungen vorbehalten.
2
Loading...
+ 2 hidden pages