HMS-VILGO Homelift 2 User Manual
1
Homelift2 user guide
Version 01/2012
4
150 Kg / 330lb
H
H
o
o
m
m
e
e
l
l
i
i
f
f
t
t
2
2
2
Homelift2 user guide
Version 01/2012
3
Homelift2 user guide
Version 01/2012
Edition of January 2012:
All rights reserved. Reproduction of these instructions in whole or in part in any form without express written
permission from HMS-VILGO is strictly prohibited except for private use.
Information is regularly updated in the latest instructions versions. This can not engage the responsibility of
HMS-VILGO in any way.
Warning :
The pics on this leaflet are not under contract.
Therefore, HMS-VILGO has the right to change the products inside anytime.
TABLE OF CONTENTS
1. PREAMBLE
……………………………………………………………………… page 4
2. DESCRIPTION
……………………………………………………………….……… page 4-7
2.1. Where to use Homelift 2
2.2. General description
2.3. Technical description
2.4. Dimensional characteristics
2.5. Labelling
3. HOMELIFT ASSEMBLING
……………………………………………………… page 7-14
3.1. Package contents
3.2. Homelift 2 assembling (page 13)
3.3. Plugging
4. USE
…………………………………………………………………………………… page 14-17
4.1. First use
4.2. Homelift 2 use
4.3. Safety
4.4. Control box operating, battery charge
4.5. Storage instructions
5. HOMELIFT2 MAINTENANCE
…………………………………………….. page 17-18
5.1. Weekly maintenance
5.2. Annual maintenance
5.3. Lifecycle
5.4. Warranty
5.5. Recycling
Removable central leaflet :
RECOMMENDED CHECKS
……………………………………………………… page 9
EVALUATION OF THE NUMBER OF HOIST OPERATING CYCLES
…… page 10
MAINTENANCE BOOK
………………………………………………………..… page 11
SPARE PARTS LIST
…………...………………………………… page 12
4
Homelift2 user guide
Version 01/2012
1. PREAMBULE
Only entitled staff who has read and understood these complete instructions can use Homelift2.
Always use Homelift2 with a person who can belay the patient in case of blackout of the patient or failure of
the hoist.
Use Homelift2 following the maintenance instructions (see Homelift2 maintenance paragraph). If you have any
doubt about Homelift2 operating, please call HMS-VILGO After Sales Service for a diagnostic before using the
hoist on a patient.
HMS-VILGO will not be responsible for damage if these warnings are not followed.
This manual contains all the technical information you need to make a good use of this product. This
information has been carefully checked by HMS-VILGO. This is not an exhaustive list and HMS-VILGO is not
responsible for any kind of mistakes or omissions.
2. DESCRIPTION
2.1. WHERE TO USE HOMELIFT2
The Homelift2 is a lifting device. It is used to transfer disabled or elderly people:
- At home, to transfer the patient to an armchair, a toilet seat or a chair,
- In independent living structures,
- In a nursing or care home
Do not use Homelift2 outdoors or on a surface whose declivity could make the patient fell down (>5°).
Before any use of the product :
1- Read the leaflet : It will inform you how to use the product securely and must
be at the disposal of the caring personnel.
2- Product cleaning and disinfection : Please see chapter 5.
3- Connection of the Homelift 2 to the electrical network : Please see chapter 4.5
4- Make sure of the good working of all functions.
5
Homelift2 user guide
Version 01/2012
2.2. GENERAL DESCRIPTION
2.3. TECHNICAL CHARACTERISTICS
Materials : Steel
Finish : Epoxy paint coating
Class: I
Weight : base : 15 kg / 34 lb
Pole + support beam :20 kg / 44 lb
Maximum patient weight to be transferred: 150 kg / 330lb
Electrical equipment conformed to NF EN 60 601-1 and to NF EN 60 601-1-2
Duty cycle : 2 min./18 min. (10%)
Input : 230V ~ 50 HZ
Actuator input : 24 V CC
Battery charge required time : 15 hrs
Battery autonomy :
±
40 cycles
Electrical equipment protection : remote control : IP X6
control box : IPX4
actuator : IP X4
Pedals
Pole
Control box
Driving handles
Support beam
Beam
Side foot
Electric actuator
∅
3
in twin casters
∅
4 in wheels with
brake
6
Homelift2 user guide
Version 01/2012
2.4. DIMENSIONS
Dimensional characteristics of the base
1 -
Maximum external length
35 in
2 -
Maximum internal length
26 in
3 -
Minimal internal width :
18 in
4 -
Minimal external width :
22 in
5 -
Maximum internal width
: 31 in
6 -
Maximum external width :
35 in
7 -
Minimum ground clearance :
1.5 in
8 -
Maximum front height :
4 in
9 -
Maximum back height :
5,7 in
Total lift / lifting radius / overall dimension :
1 - Lifting radius at the highest CSP : 22.5 in
2 - Total lift (3-4): 41 in
3 - Maximum CSP height : 69 in
4 - Minimal CSP height : 27.5 in
5 - CSP height at maximum lifting radius : 49 in
6 - Lifting radius at lowest CSP : 24in
7 - Maximum lifting radius : 31in
8 - Low position floor/hooks height : 20in
9 - High position floor/hooks height : 62 in
10 - Low position overall dimension height : 48 in
11 - High position overall dimension height : 72 in
12 - Overall dimension length : 43 in
13 – Floor/handles height : position1: 44 in
position2: 47 in
6
5
4
2 1
3
7
9 8
* CSP : Central Suspension Point
4
10
8
6
12
11
9
3
CSP*
1
13
Loading...