HMS AnyBus-PCI Profibus DPV1 Slave Installation Leaflet

Installation Leaflet - AnyBus-PCI Profibus DPV1 Slave
Rev 1.03 - Part no. SP0780

AnyBus-PCI Profibus DPV1 Slave

Package Contents

The AnyBus-PCI Profibus DPV1 Slave package consists of the following items:

 Anybus-PCI Profibus DPV1 Slave card

 This installation leaflet

 CD-ROM containing software drivers, SDK and documentation

Warning!

The AnyBus-PCI Profibus DPV 1 Slave card contains ESD (Electrostatic Discharge) sens itive components. Be sure
to observe ESD precautions when installing the card; do not touch any circuits or connectors, and handle the card
only by its edges.

PCI Card Overview

Profibus Connector

(reserved)

1

2

3

4
6

5

Status LED:s

PCI Edge Connector

Status LED:s

# Indication State Meaning

1 Active Off PCI card not active

2 Application Led - Controlled by software (ABS_SetApplicationLed())
3 Acyclic Traffic Off No power or no DPV1 request currently being executed

4 Fieldbus Diagnostics Off No diagnostics present or no power on the module

5 Fieldbus On Line Off Bus is not online, or now power on the module

6 Fieldbus Off Line Off Bus is off line

Web: www.anybus.com HMS Industrial Networks AB

Green PCI card active (i.e. Transport Path open)

Green A DPV1 request is currently being executed

Red, Flashing 1Hz Error in configuration data
Red, Flashing 2Hz Error in parameter data
Red, Flashing 4Hz Profibus ASIC initialisation error

Green Bus is on line and dat a exchange is possible
Green, Flashing Clear mode

Red Bus is off line, or no power on the module

Software Driver Installation

Important:

• It is strongly recommended to perform the software installation prior to installing the PCI card into the PC. This
ensures that the software drivers are available when the card is detected by the system.

• Administration rights are requ ired when installing the drivers on windows NT, 2000 or XP.

• To avoid software conflicts, make sure that no other AnyBus-PCI drivers are installed in the system (e.g. the

!

1. Double click on ‘Setup.exe’.

(This file will be executed automat­ically when inserting the supplied
software CD-ROM provided that
the AutoPlay feature is enabled.)

2. Click ‘Browse’ to select a different
installation path, or click ‘Next’ to
start the installation process.

CoDeSys drivers)

Installation Leaflet - AnyBus-PCI Profibus DPV1 Slave

Rev 1.03 - Part no. SP0780

3. A progress bar will illustrate
progress of the installation.

4. Finished.

Shut down the computer and pro­ceed with the hardware installation
steps described on the following
pages.

HMS Industrial Networks AB Web: www.anybus.com