HM Electronics XCVR6K1 User Manual

7/20/09

Nemko USA, Inc.
11696 Sorrento Valley Rd.
San Diego CA, 92121
USA

Re: Installation and Operating instructions for Transceiver Module – XCVR6K1

HM Electronics, Inc (HME). does not plan to create an Installation and Operating manual for
this assembly. This assembly will never be sold to a third party for use in any products other
than those designed by HME. HME intends to use this assembly only as an integrated part
of other products which will be built within the guidelines of our own assembly &
documentation processes which include but are not limited to:

• Labeling the FCC/IC ID on the finished product (either it’s own or the ID of the
module it contains). In the case of the XCVR6K1, the labels are shown on page 2.

• Using only the approved antennas which are dictated by the bill of material that the
product is built to.

• Using connectors at top level on the product which are non-standard (Reverse TNC)

• A System 61000 Installation Manual. Please see page 3 for the text which shall be

included in the Installation manual pages relating to regulatory requirements.

Sincerely,

Thomas H. Stanford
Principal RF Engineer
HM Electronics Inc.

Figure 1 Module FCC Label

Figure 2 Main Unit FCC Label

Figure 3 Main Unit FCC Statement Label