HMC Electronics 2104-12S User Manual

Turbo-Coat Acrylic Conformal Coating

2108

Techspray offers a variety of coating formulas to match field and engineering requirements. Specifications generally depend on the type
of protection needed: e.g. thermal, moisture, and static resistance.

Coatings contain Opti/Scan to allow quality control inspection of coverage and evenness of the coating on a PCB. A coated board can
be passed under a standard, low-cost UV (short-wave black) light, and the coated areas glow. The brighter the glow, the thicker the
coating.

Fastest cure -- dry to touch in 3 minutes!

TurboCoat Acrylic Conformal Coating is designed to speed up board production throughput without
additional investment of expensive UV systems or other capital equipment. Conformal coating cure
time is often considered a production bottleneck for PCB assembly operations. TurboCoat dries tack­free in 3 minutes, allowing manufactures to handle boards in 1/3 the time of the leading acrylic coating!
Full cure can be achieved as quickly as 10 minutes with elevated temperatures.

Fastest cure – dry to touch in 3 minutes!
Max operating temperature - to 257°F (125°C)
Non-ozone depleting
Dielectric strength - 1000 volts/mil
Fast & easy rework & repair
IPC-CC-830B & MIL-I-46058C qualified
UL94 V-0 rated
UV indicator for black light QC inspection
Toluene & Xylene free -- no HAPs (hazardous air pollutants)

Product Packaging

2108-12S

Turbo-Coat Acrylic Conformal Coating

12 oz

12 units/case

2108-P

Turbo-Coat Acrylic Conformal Coating

1 pint

1 units/case

2108-G

Turbo-Coat Acrylic Conformal Coating

1 gal

1 units/case

2108-5G

Turbo-Coat Acrylic Conformal Coating

5 gal

1 units/case

2108-N

Turbo-Coat Acrylic Coating Pen

10 ml

12 units/case

page 1 / 3

Techspray - US office, P.O. Box 949,

Amarillo, TX 79105-0949,
Tel. [phone], Toll-free 800-858-4043
Fax [phone], [e-mail]

Documentation Provided By HMC Electronics

33 Springdale Ave. Canton, MA 02021

http://www.hmcelectronics.com

[phone]

Instructions

Surface to be sprayed should be thoroughly cleaned with solvent such as Flux Remover G3 (1631). Surface must be completely dry before application of coating. As you
spray or brush coating, allow material to flow around components. Coating will be tack free in approximately 5 minutes; however, full cure requires 24 hours depending on
humidity and thickness of application. Coated boards can be reworked by applying soldering iron directly to coating, or complete removal can be achieved in 1 to 3 hours
by using Conformal Coating Remover (2510). Removal time depends on temperature, thickness of coating, and application.

Chemical & Physical Properties

Appearance Clear, colorless liquid
Odor Aromatic odor
Flash Point 1.4°C (35°F)
VOC (EPA) 33% (aerosol), 64% (bulk)
VOC (CARB) 33% (aerosol), 64% (bulk)
Boiling Point 39.4°C (103°F)
Density 0.834 at 25°C (77°F)

Chemical Composition

CHEMICAL NAME CAS #

Acrylic Polymer (non-hazardous) 109-60-4
n-Propyl acetate 142-82-5
n-Heptane 67-64-1
Acetone 88917-22-0
1-(2-Methoxy-Methyl-Ethoxy)-2-Propanol

Acetate

811-97-2

1,1,1,2-Tetrafluoroethane (aerosol only)

Environmental Policy

Techspray is committed to developing products to ensure a safer and cleaner environment. We will continue to meet and sustain the regulations of all federal, state and
local government agencies.

Resources

Techspray products are supported by a global sales, technical and customer services resources.

For additional technical information on this product or other Techspray products in the United States, call the technical sales department at 800-858-4043, email
[e-mail] or visit our web site at: www.techspray.com.

North America

Techspray
P.O. Box 949
Amarillo, TX 79105
800-858-4043

Europe

ITW Contamination Control BV
Saffierlaan 5
2132 VZ Hoofddorp
The Netherlands

Countries Outside US

Call to locate a distributor in your country

page 2 / 3

Techspray - US office, P.O. Box 949,

Amarillo, TX 79105-0949,
Tel. [phone], Toll-free 800-858-4043
Fax [phone], [e-mail]

Documentation Provided By HMC Electronics

33 Springdale Ave. Canton, MA 02021

http://www.hmcelectronics.com

[phone]