MATERIAL SAFETY DATA SHEET
Finished Product
Date Issued:
01/03/2003
MSDS No:
2102-GHV/5GHV
Date Revised:
07/20/2010
Revision No:
5
Fine-L-Kote SR (High Viscosity)
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: Fine-L-Kote SR (High Viscosity)
PRODUCT DESCRIPTION: Silicone Conformal Coating (High Viscosity)
PRODUCT CODE: 2102-GHV/5GHV
PRODUCT FORMULATION NAME: Fine-L-Coat™ SR (High Viscosity)
ACTIVE INGREDIENT(S): 1-(2-Methoxy-Methyl-Ethoxy)-2-Propanol Acetate; Polysiloxane mixture;
Benzene- methyl, (Toluene)
MANUFACTURER
24 HR. EMERGENCY TELEPHONE NUMBERS
Techspray, L.P.
1001 N.W. 1st Street
P.O. Box 949
Amarillo TX 79107
Emergency Contact: Chemtrec
Product Stewardship: 1-800-858-4043
Service Number: 1-800-858-4043
CHEMTREC (US Transportation) :
(800) 424 - 9300
CANUTEC (Canadian Transportation) :
(613) 996 - 6666
Emergency Phone :
(800) 858 - 4043
2. HAZARDS IDENTIFICATION
HAZARD DESIGNATION
"F+" - Extremely flammable
R12 - Extremely flammable.
"Xn" - Harmful
R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed.
EMERGENCY OVERVIEW
PHYSICAL APPEARANCE: Transparent, colorless liquid.
IMMEDIATE CONCERNS: Flammable liquid and vapor.
POTENTIAL HEALTH EFFECTS
EYES: Substance causes substantial eye irritation.
SKIN: Prolonged or repeated contact can result in defatting and drying of the skin which may result in
skin irritation and dermatitis (rash).
INGESTION: Harmful if swallowed.
INHALATION: High concentrations in immediate area can displace oxygen and can cause dizziness,
unconsciousness, and possibly death with longer exposure. Keep people away from such vapors
without self-contained breathing apparatus.
SIGNS AND SYMPTOMS OF OVEREXPOSURE
EYES: Symptoms of overexposure include: stinging, tearing, redness and pain.
INGESTION: For large amounts; abdominal pain, nausea and vomiting.
Page 1 of 7
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
MATERIAL SAFETY DATA SHEET
Finished Product
Date Issued:
01/03/2003
MSDS No:
2102-GHV/5GHV
Date Revised:
07/20/2010
Revision No:
5
Fine-L-Kote SR (High Viscosity)
3. COMPOSITION / INFORMATION ON INGREDIENTS
Chemical Name Wt.% CAS EINECS
1-(2-Methoxy-Methyl-Ethoxy)-2-Propanol Acetate 1 - 10 88917-22-0
Polysiloxane mixture 60 - 80
Benzene- methyl, (Toluene) 10 - 20 108-88-3 203-625-9
2-Butanone (methyl ethyl ketone) 1 - 10 78-93-3
4. FIRST AID MEASURES
EYES: Immediately flush eyes with plenty of water for at least 15 minutes. Get immediate medical
attention.
SKIN: Wash with soap and water. Get medical attention if irritation develops or persists.
INGESTION: Aspiration hazard. If swallowed, vomiting may occur spontaneously, but do not induce. If
vomiting occurs, keep head below hips to prevent aspiration into lungs. Call a physician immediately.
INHALATION: Remove to fresh air. If not breathing, give artificial respiration or give oxygen by trained
personnel. Seek immediate medical attention.
5. FIRE FIGHTING MEASURES
FLASHPOINT AND METHOD: (40°F) TAG CC
FLAMMABLE LIMITS: 1.8% to 10%
GENERAL HAZARD: Flammable Liquid. Can release vapors that form explosive mixtures at temperatures
at or above the flash point.
EXTINGUISHING MEDIA: Use alcohol foam, carbon dioxide, or water spray when fighting fires involving
this material.
HAZARDOUS COMBUSTION PRODUCTS: Smoke, fumes and oxides of carbon.
EXPLOSION HAZARDS: Vapors may form explosive mixture with air.
FIRE FIGHTING EQUIPMENT: As in any fire, wear self-contained breathing apparatus pressure-
demand, (MSHA/NIOSH approved or equivalent) and full protective gear.
6. ACCIDENTAL RELEASE MEASURES
LARGE SPILL: -Implement cleanup procedures. -If in public area, keep public away and advise
authorities. -Recover by pumping (use an explosion proof or hand pump) or with a suitable absorbent.
GENERAL PROCEDURES: Dike area to contain spill. Take precautions as necessary to prevent
contamination of ground and surface waters. Recover spilled material on adsorbent, such as sawdust or
Page 2 of 7
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
MATERIAL SAFETY DATA SHEET
Finished Product
Date Issued:
01/03/2003
MSDS No:
2102-GHV/5GHV
Date Revised:
07/20/2010
Revision No:
5
Fine-L-Kote SR (High Viscosity)
vermiculite, and sweep into closed containers for disposal. After all visible traces, including vapors, have
been removed thoroughly wet vacuum the area. Do not flush to sewer. If area of spill is porous, remove
as much contaminated earth, gravel, etc. as necessary and place in closed containers for disposal.
7. HANDLING AND STORAGE
GENERAL PROCEDURES: Use only in a well ventilated area.
STORAGE: Store in a cool place in original container and protect from sunlight.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
EXPOSURE GUIDELINES
OSHA HAZARDOUS COMPONENTS (29 CFR1910.1200)
EXPOSURE LIMITS
OSHA PEL ACGIH TLV SupplierOEL
Chemical Name ppm mg/m
3
ppm mg/m
3
ppm mg/m
3
Benzene- methyl, (Toluene)
TWA
200
ppm
[1]
375
mg/m3
[1]
S 50
ppm
[3]
188
mg/m3
[3]
NL NL
STEL
C300
ppm
[2]
560
mg/m3
[2]
NL ppm
NL
mg/m3
NL NL
OSHA TABLE COMMENTS:
1. NL = Not Listed
2. C = Ceiling
3. S = Skin
ENGINEERING CONTROLS: Local exhaust ventilation may be necessary to control any air contaminants
to within their TLVs during the use of this product.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: For normal conditions, wear safety glasses. Where there is reasonable probability of
liquid contact, wear splash-proof goggles.
SKIN: The glove(s) listed below may provide protection against permeation. Gloves of other chemically
resistant materials may not provide adequate protection. Viton, Solvex, Butyl, Buna, Neoprene.
RESPIRATORY: A respiratory protection program that meets OSHA 1910.134 and ANSI Z88.2
requirements must be followed whenever workplace conditions warrant a respirator's use.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Liquid
pH: Not Applicable
PERCENT VOLATILE: 45 at 20°C (68°F)
Page 3 of 7
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
MATERIAL SAFETY DATA SHEET
Finished Product
Date Issued:
01/03/2003
MSDS No:
2102-GHV/5GHV
Date Revised:
07/20/2010
Revision No:
5
Fine-L-Kote SR (High Viscosity)
BOILING POINT: 79°C (134°F)
FREEZING POINT: Not Applicable
FLASHPOINT AND METHOD: (40°F) TAG CC
SOLUBILITY IN WATER: Insoluble
SPECIFIC GRAVITY: 0.830 (water=1)
(VOC): 378.000 g/L (non-exempt VOC)
10. STABILITY AND REACTIVITY
STABLE: Yes
HAZARDOUS POLYMERIZATION: No
STABILITY: Stable.
CONDITIONS TO AVOID: Heat, flames, ignition sources, and incompatables.
INCOMPATIBLE MATERIALS: Concentrated nitric and sulfuric acid mixtures, chloroform, alkalis,
chlorine compounds, acids, potassium t-butoxide.
11. TOXICOLOGICAL INFORMATION
EYE EFFECTS: Not Available
SKIN EFFECTS: Not Available
CARCINOGENICITY
Chemical Name
NTP
Status
IARC
Status
OSHA
Status
Polysiloxane mixture
NOT
LISTED
NOT
LISTED
NOT
LISTED
IARC: NOT listed
NTP: NOT listed
OSHA: NOT listed
REPRODUCTIVE EFFECTS: Toluene is listed as a reproductive hazard.
12. ECOLOGICAL INFORMATION
ENVIRONMENTAL DATA: There is limited information available on the environmental fate and effects of
this material. The primary environmental concern for release is the impact on aquatic and terrestrial
species. Due care should be taken to avoid the accidental release of this material into the environment.
Page 4 of 7
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
MATERIAL SAFETY DATA SHEET
Finished Product
Date Issued:
01/03/2003
MSDS No:
2102-GHV/5GHV
Date Revised:
07/20/2010
Revision No:
5
Fine-L-Kote SR (High Viscosity)
13. DISPOSAL CONSIDERATIONS
GENERAL COMMENTS: Dispose of in a manner consistent with federal, state, and local regulations.
14. TRANSPORT INFORMATION
DOT (DEPARTMENT OF TRANSPORTATION)
PROPER SHIPPING NAME: Flammable Liquids, N.O.S. (Toluene, Methyl ethyl ketone)
PRIMARY HAZARD CLASS/DIVISION: 3
UN/NA NUMBER: UN1993
PACKING GROUP: II
ROAD AND RAIL (ADR/RID)
KEMLER NUMBER: UN1993
HAZARD CLASS: 3
AIR (ICAO/IATA)
SHIPPING NAME: Flammable Liquids, N.O.S. (Toluene, Methyl ethyl ketone)
UN/NA NUMBER: UN1993
PRIMARY HAZARD CLASS/DIVISION: 3
PACKING GROUP: II
NOTE: Domestic shipments only. When shipping International contact TechSpray shipping department.
VESSEL (IMO/IMDG)
SHIPPING NAME: Flammable Liquids, N.O.S. (Toluene, Methyl ethyl ketone)
UN/NA NUMBER: UN1993
PRIMARY HAZARD CLASS/DIVISION: 3
PACKING GROUP: II
NOTE: Page 3230
CANADA TRANSPORT OF DANGEROUS GOODS
UN/NA NUMBER: UN1993
PRIMARY HAZARD CLASS/DIVISION: 3
PACKING GROUP: II
15. REGULATORY INFORMATION
UNITED STATES
SARA TITLE III (SUPERFUND AMENDMENTS AND REAUTHORIZATION ACT)
FIRE: Yes PRESSURE GENERATING: No REACTIVITY: No ACUTE: Yes CHRONIC: Yes
Page 5 of 7
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
MATERIAL SAFETY DATA SHEET
Finished Product
Date Issued:
01/03/2003
MSDS No:
2102-GHV/5GHV
Date Revised:
07/20/2010
Revision No:
5
Fine-L-Kote SR (High Viscosity)
313 REPORTABLE INGREDIENTS: Toluene
EPCRA SECTION 313 SUPPLIER NOTIFICATION
Chemical Name Wt.% CAS
Benzene- methyl, (Toluene) 10 - 20 108-88-3
CERCLA (COMPREHENSIVE RESPONSE, COMPENSATION, AND LIABILITY ACT)
CERCLA REGULATORY: Toluene (108-88-3), 2-Butanone(78-93-3)
Chemical Name Wt.%
CERCLA
RQ
Benzene- methyl, (Toluene) 10 - 20 1000 lbs.
CERCLA RQ: Toluene - 1000 lbs.; 2-Butanone - 5000 lbs.
TSCA (TOXIC SUBSTANCE CONTROL ACT)
Chemical Name CAS
Benzene- methyl, (Toluene) 108-88-3
TSCA STATUS: All components of this product are either listed or exempt from listing in the TSCA
inventory.
CLEAN AIR ACT
Chemical Name Wt.% CAS
Benzene- methyl, (Toluene) 10 - 20 108-88-3
CALIFORNIA PROPOSITION 65: This product contains a component known to the state of California
to cause reproductive toxicity: Toluene (CAS#108883)
Chemical Name Wt.% Listed
Benzene- methyl, (Toluene) 10 - 20 Developmental Toxicity
RCRA STATUS: U220
OSHA HAZARD COMM. RULE: Contents of this MSDS comply with the OSHA Hazard Communication
Standard 29 CFR 1910.1200.
CANADA
WHMIS CLASS: Class B2 - Flammable Liquids. Class D2B - Toxic Materials.
DOMESTIC SUBSTANCE LIST (INVENTORY): All components of this product are listed on the
Canadian DSL.
EUROPEAN COMMUNITY
Page 6 of 7
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
MATERIAL SAFETY DATA SHEET
Finished Product
Date Issued:
01/03/2003
MSDS No:
2102-GHV/5GHV
Date Revised:
07/20/2010
Revision No:
5
Fine-L-Kote SR (High Viscosity)
EEC LABEL SYMBOL AND CLASSIFICATION
"F+" - Extremely flammable
R12 - Extremely flammable.
"Xn" - Harmful
R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed.
16. OTHER INFORMATION
APPROVED BY: Pierce A. Pillon TITLE: Chemist
REVISION SUMMARY: Revision #: 5. This MSDS replaces the November 30, 2006 MSDS.
HMIS RATING
HEALTH:
2
FLAMMABILITY:
3
PHYSICAL HAZARD:
0
PERSONAL PROTECTION:
NFPA CODES
3
2 0
DATA SOURCES: Code of Federal Regulations (CFR) The Sigma-Aldrich Library of Regulatory and Safety
Data OSHA Hazard Communication Standard (29CFR1910.1200) Various Federal, State and Local
Regulations
MANUFACTURER DISCLAIMER: To the best of our knowledge, the information contained herein is
accurate. However, neither Tech Spray, L.P., or any of its subsidiaries assumes any liability whatsoever
for the accuracy or completeness of the information contained herein. Final determination of suitability of
any material is the sole responsibility of the user. All materials may present unknown hazards and
should be used with caution. Although certain hazards are described herein, we cannot guarantee that
these are the only hazards which exist.
Page 7 of 7
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
Loading...