HMC Electronics 1608-100DSP User Manual

Isopropyl Alcohol (IPA) Wipes - 70%

1608-WIPES

99.8% pure anhydrous (containing the least water possible and no denaturant) isopropyl alcohol is excellent for tape head cleaning,
defluxing, stencil cleaning, other light cleaning, and as a flux thinner. Avoid "bargain" alcohols for critical electronic cleaning. Cheap
alcohols contain much more water, which slows drying and can cause oxidation, while "denatured" alcohols leave residues.

Pre-saturated wipes with 70% pure isopropyl alcohol

Convenient, lowlinting wipes are presaturated with 70% pure IPA.

Product Packaging

1608-100DSP

Isopropyl Alcohol (IPA) Wipes - Pop-up

100 ct

12 units/case

Chemical & Physical Properties

Appearance White non-woven wipe
Odor Alcohol odor
Flash Point 54 F
VOC (EPA) 599 g/l
VOC (CARB)
Boiling Point 82 C
Density

Chemical Composition

CHEMICAL NAME CAS #

2-Propanol 67-63-0

page 1 / 2

Techspray - US office, P.O. Box 949,

Amarillo, TX 79105-0949,
Tel. [phone], Toll-free 800-858-4043
Fax [phone], [e-mail]

Documentation Provided By HMC Electronics

33 Springdale Ave. Canton, MA 02021

http://www.hmcelectronics.com

[phone]

Environmental Policy

Techspray is committed to developing products to ensure a safer and cleaner environment. We will continue to meet and sustain the regulations of all federal, state and
local government agencies.

Resources

Techspray products are supported by a global sales, technical and customer services resources.

For additional technical information on this product or other Techspray products in the United States, call the technical sales department at 800-858-4043, email
[e-mail] or visit our web site at: www.techspray.com.

North America

Techspray
P.O. Box 949
Amarillo, TX 79105
800-858-4043
email: [e-mail]

Europe

ITW Contamination Control BV
Saffierlaan 5
2132 VZ Hoofddorp
The Netherlands
[phone]
email: [e-mail]

Countries Outside US

Call to locate a distributor in your country

Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The results may vary due to differences in tests type and conditions. We recommend that each
user evaluate the product to determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Techspray's only obligation and your only solution is replacement of
product that is shown to be defective when you receive it. In no case will Techspray be liable for any special, incidental, or consequential damages based on breach of warranty, negligence or any other theory.

page 2 / 2

Techspray - US office, P.O. Box 949,

Amarillo, TX 79105-0949,
Tel. [phone], Toll-free 800-858-4043
Fax [phone], [e-mail]

Documentation Provided By HMC Electronics

33 Springdale Ave. Canton, MA 02021

http://www.hmcelectronics.com

[phone]