
ECO-SHINE™
Glass & Surface Cleaner
1505
Introduction
Cleans glass, stainless steel, chrome, mirrors, tile, plastic, ceramic and enamel and leaves a
streak-free finish. Effectively removes finger prints, light oils, and other soils. Made from 100%
naturally-derived and sustainable ingredients.
One quart (with a trigger sprayer) and one gallon containers are ideal for surface cleaning.
Packaging is selected to be easily recyclable. Quart labels made of recycled paper, and cartons
made of 40% recycled material. Trigger pump on quart eliminates the need for propellants, which
can have a global warming impact.
Convenient pre-saturated wipes available in a pop-up dispenser. Wipe material is low linting and
designed to polish as it cleans.
Eco-ShineTM Cleaner is fully compliant with CARB (California Air Resource Board) requirements.
Also compliant with European REACH (Registration, Evaluation, Authorization & Restriction of
Chemicals) and WEEE (Waste Electrical and Electronic Equipment Directive) initiatives. It does not
contain RoHS (Restriction of Hazardous Substances) restricted substances, SVHC (Substances of
Very High Concern) list substances, or halides.
Features / Benefits
• Streak-free cleaning
• Removes fingerprints & light oils
• Non-flammable
• Non-ammoniated — safe on sensitive surfaces
• Biodegradable
• Low VOC, zero GWP
• Non-ozone depleting
Applications
• Clean windows, shields, benchtops, and other surfaces
• Effective at removing dirt, fingerprints, and other light oils
• Safe on stai nless steel
Application Suggestions
Glass cleaning Use bulk when streak-free is critical
Solar panel cleaning
Work surface cleaning Wipe or bulk
Enclosures Wipe or bulk
Stainless steel cleaning (brushed) Wipe until dry
1 Copyright 2009 Techspray.
For Commercial Use Only
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440

About TECHSPRAY RENEWTM
TECHSPRAY RENEWTM is a brand that represents High Performance Eco-CleaningTM.
Techspray® has applied our expertise in solvent cleaning to formulate some of the most effective
eco-friendly cleaners on the market. Performance is our top priority, using the best “green”
solutions as they become available. We all are at the cusp of the ongoing movement toward
sustainable products, packaging, and processes. It is Techspray’s intention to stay at the cuttingedge while keeping our products powerful and cost effective.
Directions
• Spray over surface of soiled area.
• Using a lint-free wipe (we recommend Techspray 2364-50 or 2365-300 wipes), wipe lightly at
first to allow cleaning agent to break down residues.
• Continue to wipe in a circular motion until dirt and fingerprints are fully removed and cl eaner is
dry.
• Dispose of soiled wipe as appropriate depending on the type of material removed.
Chemical Components
Component CAS#
Ethanol ............................................................................................................ 64-17-5
Includes other hazardous components in non-reportable quantities.
Chemical Properties (MSDS available on request)
• EXPOSURE LIMIT: Manufacturer’s recommendation 1000 ppm.
• PHYSICAL STATE: Liquid
• ODOR: Faint citrus odor
• APPEARANCE: Clear, colorless liquid
• pH: 7.5-8.5
• PERCENT VOLATILE: 99% at 104°C
• VAPOR PRESSURE: < 0.21 mmHg@20°C (VOC Composite Vapor Pressure)
• BOILING POINT : 205°F (96°C)
• FLASHPOINT AND METHOD (TAG Closed Cup): None to boiling point
• SOLUBILITY IN WATER: Soluble
• DENSITY: 0.99 at 25°C
• VOC (by wt): 2.1%, 20.9 g/l
2 Copyright 2009 Techspray.
For Commercial Use Only
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440

Compatibility
Metals
Test method: 15 minute immersion at room temperature in sealed jar, remove, wipe dry, and make observations.
Observations made immediately after removal and drying, and 1 hour later.
Material
Compatibility
Brassfoil
Excellent
Copperfoil
Excellent
Nickel200
Excellent
Aluminum6061
Excellent
Aluminum2024
Excellent
Anodizedaluminum
Excellent
StainlessSteel316
Excellent
StainlessSteel304
Excellent
Mildcarbonsteel
Excellent
GalvanizedSteel
Excellent
Note: Eco-Shine™ is a water-based formula, so will encourage oxidation with prolonged exposure to iron, steel, and
other susceptible metals.
Plastics
Test method: Tested as bulk unstressed coupons, and the following immersion times for the base chemistry:
1 minute, 5 minutes, and 15 minutes.
Material Compatibility
Material Compatibility
ABS
Excellent
PMMA
Excellent (1)
Nylon
Excellent
POM
Excellent
Lexan
Excellent
PP
Excellent
HDPE
Excellent
PS
Excellent
LDPE
Excellent
PTFE
Excellent
C. E. Phenolic
Excellent
PVC
Excellent
1 = Crazing observed on stressed PMMA. No effect on unstressed PMMA.
Environmental Policy
Techspray® is committed to developing products to ensure a safer and cleaner environment. We
will continue to meet and sustain the regulations of all federal, state and local government
agencies.
Packaging and Availability
Eco-ShineTM Cleaner available in the following sizes:
1505-100DSP 100 count pre-saturated wipes, 6" x 8" (15cm x 20cm)
1505-QT 1 quart (0.95L) w/ trigger sprayer
1505-G 1 gallon (3.8L)
Available as special order, call for pricing:
1505-5G 5 gallon (19L)
1505-54G 54 gallon (205L)
1505-275G 275 gallon (1,045L)
3 Copyright 2009 Techspray.
For Commercial Use Only
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440

4 Copyright 2009 Techspray.
For Commercial Use Only
Resources
Techspray® products are supported by global sales, technical and customer services resources.
For additional technical information on this product or other Techspray® products in the United
States, call the technical sales department at 800-858-4043, email tsales@techspray.com or visit
our web site at: www.techspray.com.
North America Europe Countries Outside US
Techspray ITW Contamination Control Call to locate a distributor
P.O. Box 949 Skejby Nordlandsvej 307 in your country.
Amarillo, TX 79105 DK-8200 Aarhus N
800-858-4043 +45 87 400 220
email: tsales@techspray.com email: info@itw-cc.com
Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The
results may vary due to differences in tests type and conditions. We recommend that each user evaluate the product to
determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Techspray’s
only obligation and your only solution is replacement of product that is shown to be defective when you receive it. In no
case will Techspray
®
be liable for any special, incidental, or consequential damages based on breach of warranty,
negligence or any other theory.
Techspray
®
is a registered trademark of Techspray. Techspray RenewTM, Eco-StencilTM, and “High Performance Eco-
Cleaning
TM
” are trademarks of Techspray.
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440