HMC Electronics 1502QT User Manual

1 Copyright 2010 Techspray.
For Commercial Use Only
PINE-SHOWER™ Degreaser & Surface Cleaner
1502
Introduction
Leveraging the cleaning power of pine, Pine-Shower quickly removes grease and other soils, and leaves a non-oily finish.
Does not contain butyl cellosolve, which is common in many degreasers and surface cleaners, and has potential negative health effects. Under California guidelines (CARB), Pine-Shower has zero VOC, and has a less than 3% VOC under EPA guidelines.
Pine-Shower is economical and considered ready-to-use, but can be diluted for light surface and equipment cleaning. Pine
-ShowerTM Cleaner is fully compliant with CARB
(California Air Resource Board) requirements. Also compliant with European REACH (Registration, Evaluation, Authorization & Restriction of
Chemicals) and WEEE (Waste Electrical and Electronic Equipment Directive) initiatives. It does not contain RoHS (Restriction of Hazardous Substances) restricted substances, SVHC (Substances of Very High Concern) list substances, or halides.
Features / Benefits
Clean greasy equipment & surfaces
Concentrated and dillutable
Non-flammable
pH in neutral range – non-corrosive
Safe on most plastics and painted surfaces
Biodegradable
Low VOC, zero GWP
Non-ozone depleting
Applications
Removal of heavy greases and oils
Cleaning on and around heavy machinery
Cleaning shelves and other surfaces
Dilution Instructions
Full strength – Caked-on grease (e.g. compressors, engines, etc.), grills*, oil stains*
10 parts water : 1 part Pine-Shower – Greasy tools, floor (e.g. concrete) stains*, vents,
heavily stained (food) appliances*, scuff marks on doors, heavy grease on wheels
30-50 parts water : 1 part Pine-Shower – Chrome fittings, stainless steel, very light general cleaning
* If on food processing equipment, must be rinsed thoroughly to avoid undesirable residues.
Product Information
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
2 Copyright 2010 Techspray.
For Commercial Use Only
About TECHSPRAY RENEWTM
TECHSPRAY RENEWTM is a brand that represents High Performance Eco-CleaningTM.
Techspray® has applied our expertise in solvent cleaning to formulate some of the most effective eco-friendly cleaners on the market. Performance is our top priority, using the best “green” solutions as they become available. We all are at the cusp of the ongoing movement toward sustainable products, packaging, and processes. It is Techspray’s intention to stay at the cutting­edge while keeping our products powerful and cost effective.
Directions
Spray and saturate the soiled area. Let soak for 30-60 seconds depending on thickness of the grease.
Using a lint-free wipe (we recommend Techspray 2364-50 or 2365-300 wipes), wipe lightly at first to allow cleaning agent to break down residues.
Continue to wipe in a circular motion until the grease or oil is fully removed.
For thick greases, reapplication may be needed.
On walking surfaces, mop thoroughly after cleaning.
Material is easily rinsed by wiping with water dampened cloth.
Dispose of soiled wipe as appropriate depending on the type of material removed.
Chemical Components
Component CAS#
Aliphatic Ethoxylated Alcohols ......................................................................... 78330-20-8
Dimethyl-2-methyl glutarate ............................................................................. 14035-94-0
Proprietary Surfactant Blend
Ethoxyl-Propoxyl Terpene ............................................................................... 174955-61-4
Poly(oxy-1,2-ethanediyl), a-hydro-w-hydroxy- ................................................ 25322-68-3
Chemical Properties (MSDS available on request)
EXPOSURE LIMIT: Limits on components not established.
Manufacturer’s recommendation 1000 ppm.
PHYSICAL STATE: Liquid
ODOR: Mild pine scent
APPEARANCE: Light green, soapy liquid
pH: 7 to 8
BOILING POINT : 212°F (100°C)
FLASHPOINT AND METHOD (TAG Closed Cup): None to boiling point
SOLUBILITY IN WATER: Fully miscible
DENSITY: ~1.00 at 25°C
VOC (by wt): 2% by wt (EPA), 0% (CARB)
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
3 Copyright 2010 Techspray.
For Commercial Use Only
Performance
Tested according to modified MIL-PRF-29608 4.59 standards: Soil is applied to cleaning coupons, sprayed with cleaning fluid, allowed to sit 15-seconds, then a poly-cellulose wipe is dragged across one time using a weighted dowel to maintain consistent pressure. Percentage refers to the amount of soil (by weight) removed from stainless steel test coupon.
SAMPLE ID CONCENTRATION SOIL
CLEANING
EFFICIENCY
1502 Pine-Shower
100% Lube/Soil Blend*
85%
1502 Pine-Shower
50% Lube/Soil Blend*
64%
1502 Pine-Shower
25% Lube/Soil Blend*
57%
1500 Eco-Shower
100% Lube/Soil Blend*
93%
1500 Eco-Shower
50% Lube/Soil Blend*
75%
1500 Eco-Shower
25% Lube/Soil Blend*
60%
1500 Eco-Shine
100% Lube/Soil Blend*
65%
Simple Green
100% Lube/Soil Blend*
75%
Simple Green
50% Lube/Soil Blend*
50%
Simple Green
25% Lube/Soil Blend*
38%
409 All-Purpose Cleaner
100% Lube/Soil Blend*
36%
Windex Original
100% Lube/Soil Blend*
62%
Hydroforce
100% Lube/Soil Blend*
90%
Control dry wipe
Lube/Soil Blend*
29%
Control H2O wet wipe
Lube/Soil Blend*
42%
* Composition of lube/soil blend: 2 parts Mystik #2, 2 parts Lubriplate #1242, 2 parts Slick 50 #1, 1 part Lubriplate
80W-140, 1 part Silicone TBF9-350, 1 part soil.
Compatibility
Metals
Test method: 15 minute immersion at room temperature in sealed jar, remove, wipe dry, and make observations. Observations made immediately after removal and drying, and 1 hour later.
Material
Compatibility
Brassfoil
Excellent
Copperfoil
Excellent
Nickel200
Excellent
Aluminum6061
Excellent
Aluminum2024
Excellent
Anodizedaluminum
Excellent
StainlessSteel316
Excellent
StainlessSteel304
Excellent
Mildcarbonsteel
Excellent
GalvanizedSteel
Excellent
Note: Pine-Shower™ is a water-based formula, so will encourage oxidation with prolonged exposure to iron, steel, and other susceptible metals.
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
4 Copyright 2010 Techspray.
For Commercial Use Only
Plastics
Test method: Tested as bulk unstressed coupons, and the following immersion times for the base chemistry: 1 minute, 5 minutes, and 15 minutes.
Material Compatibility
Material Compatibility
ABS
Excellent
PMMA
Good (1)
Nylon
Excellent
POM
Excellent
Lexan
Excellent
PP
Excellent
HDPE
Excellent
PS
Good (1)
LDPE
Excellent
PTFE
Excellent
C. E. Phenolic
Excellent
PVC
Excellent
1 = Slight softening after 15 minutes of exposure.
Environmental Policy
Techspray® is committed to developing products to ensure a safer and cleaner environment. We will continue to meet and sustain the regulations of all federal, state and local government agencies.
Packaging and Availability
Pine-ShowerTM Cleaner available in the following sizes:
1502-QT 1 quart (0.95L) w/ trigger sprayer 1502-G 1 gallon (3.8L) in plastic jug 1502-5G 5 gallon (19L) in plastic tub
Available as special order, call for pricing:
1502-54G 54 gallon (205L) in plastic drum
1502-275G 275 gallon (1,045L)
Resources
Techspray® products are supported by global sales, technical and customer services resources. For additional technical information on this product or other Techspray® products in the United
States, call the technical sales department at 800-858-4043, email tsales@techspray.com or visit our web site at: www.techspray.com
.
North America Europe Countries Outside US
Techspray ITW Contamination Control Call to locate a distributor P.O. Box 949 Skejby Nordlandsvej 307 in your country. Amarillo, TX 79105 DK-8200 Aarhus N 800-858-4043 +45 87 400 220 email: tsales@techspray.com email: info@itw-cc.com
Important Notice to Purchaser/User: The information in this publication is based on tests that we believe are reliable. The results may vary due to differences in tests type and conditions. We recommend that each user evaluate the product to determine its suitability for the intended application. Conditions of use are outside our control and vary widely. Techspray’s only obligation and your only solution is replacement of product that is shown to be defective when you receive it. In no case will Techspray
®
be liable for any special, incidental, or consequential damages based on breach of warranty,
negligence or any other theory. Techspray
®
and Blue Shower® are registered trademarks of Techspray. Techspray RenewTM, Pine-ShowerTM, and “High
Performance Eco-Cleaning
TM
” are trademarks of Techspray.
Documentation Provided By HMC Electronics
33 Springdale Ave. Canton, MA 02021
http://www.hmcelectronics.com
(800) 482-4440
Loading...