HL-Tech WL-3002, WL-3002B Hardware Installation And Configuration Utility User Manual

WLAN 802.11 b/g MiniPCI

WL-3002

Hardware Installation and

Configuration Utility User’s Guide

Integrated Baseband and MAC Solution

IEEE 802.11b/g WLAN

WL-3002 User’s Manual

HL-TECH Corporation

2

Contents:

Table of Contents .

……….……….………..……….…………...2

Introduction

….…………………………………………………..3

Install the WLAN card in PC/NB

………….……….….………..4

Install WL-3002 driver…….………………….…….…………..5

Setup WL-3002 Configuration Utility…

………….…………….7

WL-3002 User’s Manual

HL-TECH Corporation

3

Introduction

The Wireless LAN Configuration Utility is a powerful application that helps you to
configure this WLAN card and monitor the statistics of the communication status. Unlike
the standard method of configuring the card via the operating system utilities, this
application permits the dynamic modification of the configuration parameters while the
card is operating. It also offers more configuration options.

We offer the Wireless LAN Configuration Utility for Windows® 98SE/Me/2000/XP.

Mini-PCI WLAN equipment has been tested and found to comply with limits for a Class
B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in residential installations.
This equipment generates, uses, and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications.

WL-3002 User’s Manual

HL-TECH Corporation

4

Install the WLAN card in PC/NB

Release the screw from PC/NB

Find out the pre-wired cable

Connect the cable with Mini-PCI

Align and firmly plug the Mini-PCI card
into the slot.

Re-place the cover to PC/NB

Secure the screw with a cross screwdriver.

WL-3002 User’s Manual

HL-TECH Corporation

5

Install WL-3002 driver

The program will automatically proceed with
installing.

Press “Next” to continue

Press “Browser” to change the folder where setup
will install files or press “Next” to continue.

Select or create a program folder and press
“Next” to continue.

The program will automatically proceed with
installing.

Press “Yes” to continue.

WL-3002 User’s Manual

HL-TECH Corporation

6

Press “Continue” to continue the process.

Insert the Wireless Card to slot of NB and choose

“Install the software automatically
(Recommended)” and press “Next”.

Press “Finish” to complete the installation