Tel:
Fax:
After Hours:
Telephone Number of your Alarm System
Get the list of commands sent to your phone
Text your User Code followed by a space and the word HELP
to your system.
ABC
2222 HELP
NOTE
We advise that where there are multiple users of a system that the Report Arm option is switched ON in the
modem card menu. Please ask your installer about this feature.
WARNING
While this system has been designed to the highest standards it does not offer guaranteed protection against
burglary or fire. Any alarm system is subject to compromise or failure to activate for a variety of reasons.
Therefore, good installation practices and regular maintenance are essential to ensure continuous satisfactory
operation of the system. The transmission of text messages is dependent on the SMS service provider. HKC Ltd.
cannot guarantee successful messaging. Messages which remain undelivered when the validity period expires are
discarded. The validity period is the time the message is submitted plus 12 hours.
COPYRIGHT
Ó HKC Ltd. All Rights reserved. No part of this publication may be reproduced, transmitted, stored in a retrieval
system or translated in another language in any form or by any means - electronic, mechanical or otherwise
without the prior written permission of HKC Ltd.
DISCLAIMER
HKC Ltd. makes no representations or warranties with respect to the contents hereof and specifically disclaim any
implied warranties of merchantability or fitness for any particular purpose. Further, HKC Ltd. reserve the right to
revise this publication and to make changes from time to time in the contents hereof without obligation of HKC
Ltd. to notify any person of such revision.
You will receive a list of the commands;
Code ARM/UNSET
Code STATUS
Code LOG
Code LIGHTS ON/OFF
Code HEAT ON/OFF
Code GATES OPEN/CLOSE
Code AUX ON/OFF
Overview of the SecureWatch GSM Unit
The SecureWatch GSM Unit
provides an alternative, wireless,
route to your central station in the event of land line failure. It also
allows you to contact your system via text messaging.
The following features have been included....
?Telephony through PSTN or GSM network
?Pre-fitted O SIM card for access to O wireless network
2 2
?Arm/Disarm your panel via your mobile phone
?Get system status and log events sent to your mobile phone
?Open & close your gates or turn on and off your lights, heating etc.
by text
?1 hour security lockout after 7 wrong text commands/user codes
?EN 50131-1 Grade 2 Class II
ABC
2222 ARM
def 3
abc 2
1
jkl 5
ghi 4
This marking certifies that this product has been tested in a representative system complying with the requirements laid down in
Electromagnetic Compatibility directive 89/336/EEC and Low Voltage Directive 72/23/EEC and subsequent modifications.
mno 6
3
Arming your system
Text your User Code followed by a space and the word ARM to your
system.
ABC
2222 ARM
Depending on the status of your system
you will receive one of the following
confirmation messages;
Confirmed System Armed or
System Already Armed or
System Not Ready to Arm
Notes:
1) If you prefer, the word SET can be used instead of ARM
2) Part arm your system by texting User Code followed by ARM A or ARM B
3)When sending commands, we strongly recommend that you turn off the
predictive text feature on your phone.
Unsetting your system
Text your User Code followed by a space and the word UNSET to
your system.
ABC
2222 UNSET
Depending on the status of your system
you will receive one of the following
confirmation messages;
Confirmed System Unset or
System Already Unset
Note: If you prefer, the word DISARM can be used instead of UNSET
Requesting the log of recent events
Text your User Code followed by a space, then the word LOG
followed by another space and the number of log events (between 1
and 21) to your system.
2222 LOG 2
4
2222 is being used as a User code for illustrative purposes only
ABC
Depending on how many log events
you request this command might
involve several text messages from the
system to your phone
Note: 2222 LOG will send the last 7 log events.
Getting the current status of your system
Text your User Code followed by a space and the word STATUS to
your system.
ABC
2222 STATUS
Depending on the status of your system
you will receive the following types of
messages;
System Armed / Unset
Lights ON / OFF
Heat ON / OFF
Gates Open / Closed
Aux ON / OFF
GSM Signal 80% etc.
Note: If you prefer, the word STAT can be used instead of STATUS
Switching on your lighting
Text your User Code followed by a space and the words LIGHTS
ON to your system.
ABC
2222 LIGHTS ON
Depending on the status of your system
you will receive one of the following
confirmation messages;
Lights On or
Lights Already On or
Lights Not Allowed
Switching off your lighting
Text your User Code followed by a space and the words LIGHT OFF
to your system.
ABC
2222 LIGHTS OFF
2222 is being used as a User code for illustrative purposes only
Depending on the status of your system
you will receive one of the following
confirmation messages;
Lights Off or
Lights Already Off or
Lights Not Allowed
5
Switching on your heating
Text your User Code followed by a space and the words HEAT ON
to your system.
ABC
2222 HEAT ON
Depending on the status of your system
you will receive one of the following
confirmation messages;
Heat On or
Heat Already On or
Heat Not Allowed
Switching off your heating
Text your User Code followed by a space and the words HEAT OFF
to your system.
ABC
2222 HEAT OFF
Depending on the status of your system
you will receive one of the following
confirmation messages;
Heat Off or
Heat Already Off or
Heat Not Allowed
Opening your gates
Text your User Code followed by a space and the words GATES
OPEN to your system.
ABC
2222 GATES OPEN
6
2222 is being used as a User code for illustrative purposes only
Depending on the status of your system
you will receive one of the following
confirmation messages;
Gates Open or
Gates Already Open or
Gates Not Allowed
Closing your gates
Text your User Code followed by a space and the words GATES
CLOSE to your system.
ABC
2222 GATES CLOSE
Depending on the status of your system
you will receive one of the following
confirmation messages;
Gates Closed or
Gates Already Closed or
Gates Not Allowed
Other commands
AUX ON Switches the auxiliary output on
AUX OFF Switches the auxiliary output off
ARM A Part sets the system (except zones set up for part-guard A)
ARM B Part sets the system (except zones set up for part-guard B)
SET A Same as ARM A (if you prefer to use the word “set”)
SET B Same as ARM B (if you prefer to use the word “set”)
GLOG Sends the last 7 log events of the GSM unit
Note: Ask your installer if you are permitted to inhibit zones and tampers
SET ** Inhibits all open zones before setting the system
SET ## Inhibits all open tampers before setting the system
SET *3 Inhibits a specific zone (in this example zone 3)
SET *z3 This command is the same as set *3 above
SET *z03 This command is the same as set *3 above
SET *z003 This command is the same as set *3 above
SET #3 Inhibits a specific tamper circuit (in this example tamper 3)
SET #z3 This command is the same as set #3 above
SET #z03 This command is the same as set #3 above
SET #z003 This command is the same as set #3 above
SET *p80 Inhibits a specific point-zone (in this example point 80)
SET #p80 Inhibit a specific point-tamper (in this example pointer 80)
GATE Trips the GSM output assigned to pulse gate for the period
that is stated in the Output Pulse Menu
Note: in home-auto mode output 3 is now defaulted to Pulsed-Gate (PG). Sending the SMS command
“gate” now triggers the output for 5 seconds. This time is programmable and the output can also be
re-programmed back to a toggled output
2222 is being used as a User code for illustrative purposes only
7
Loading...