HIX TXM-20 Installation Manual
TXM-20
Food Equipment Division
OWNER’S MANUAL
The Start Of A Great Tortilla
16”x20” / 15”x15” Air Automatic Heat Transfer Machines
Visit www.hixcorp.com
ext. 209, ext. 211, ext. 220, ext.221 or
For Customer Service, Call 1-800-835-0606
Unpacking / Inspection / Installation .......................................................... 2
Operation................................................................................................3-4
Cleaning / Maintenance ............................................................................ 5
CONTENTS
Call 1-800-835-0606
BEFORE warranty repair you MUST get Prior Authorization:
Specifications ............................................................................................6
Warranty..................................................................................................... 8
Warranty will be voided otherwise.
BEFORE warranty repair you MUST get
Prior Authorization: Call 1-800-835-0606
WARRANTY
Our system will automatically register the equipment on the date it was shipped. If the
NOTICE
equipment was not purchased directly from HIX, but through a distributor (either domestic
or foreign), please keep a copy of their sales invoice showing the serial number and date
it was sold/shipped to you with this warranty. In this case, we will use the distributor’s
invoice date as the beginning warranty date. STAPLE A COPY OF YOUR RECEIPT TO
THIS WARRANTY and keep in a safe place to provide verification of your warranty
should a problem occur. Thank you.
Please fill in the following information and attach a copy of your receipt for your records.
Date Purchased: _______________________ From:_____________________________
Model #: ______________________________ Serial #:___________________________
This warranty applies to equipment manufactured by the HIX Corporation (HIX),
Pittsburg, Kansas, U.S.A. HIX warrants to the original purchaser its Dough, Tortilla and
In the event of a defect, HIX, at its option, will repair, replace or substitute the defective
Poultry Presses against defects in workmanship and material, except for wear and tear
for a period of “One Year” from the date of purchase. All dough press carts, compres-
sors, and accessories are warranted for 90 days from the date of purchase.
This warranty does not cover normal wear and tear, damages due to accident, misuse/
item at no cost during this period subject to the limitations of insurance and shipping costs
stated below.
abuse, alterations or damage due to neglect or lack of proper lubrication or maintenance.
HIX shall not be responsible for repairs or alterations made by any person without the
In the case of a problem with the equipment identified herein, HIX Corporation should be
prior written authorization by HIX. This warranty is the sole and exclusive warranty of
HIX and no person, agent, distributor, or dealer of HIX is authorized to change, amend or
modify the terms set forth herein, in whole or in part.
contacted during regular business hours to discuss the problem and verify an existing
warranty. HIX personnel will assist the customer to correct any problems which can be
corrected through operation or maintenance instructions, simple mechanical adjustments,
or replacement of parts. In the event the problem cannot be corrected by phone, and
upon the issuance of a return authorization by HIX, the equipment shall be returned to HIX
or an authorized service representative. All insurance and shipment/freight costs are
This expressed warranty is given in lieu of any and all other warranties, whether
solely the responsibility of the customer, and not that of HIX, and HIX shall not be
responsible for improper handling or damage in transit. HIX customer service personnel
may be contacted for complete return authorization and reconditioning information.
In no event shall HIX’s liability for breach of warranty extend beyond the obligation to
expressed or implied, including but not limited to those of merchantability and fitness for a
particular purpose, and constitutes the only warranty made by HIX Corporation.
This warranty gives you specific legal rights and you may also have other rights which
repair or replace the nonconforming goods. HIX shall not be liable for any other damages,
either incidental or consequential, or the action as brought in contract, negligence or
otherwise.
vary from state to state.
(620) 231-8568 • Fax: (620) 231-1598
1201 E. 27th Terrace • Pittsburg, KS 66762 • U.S.A.
E-Mail: mail@hixcorp.com • Website: www.doughxpress.com
©2007 HIX Corp. 4 TXM20030107
7
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
KNOB PLASTIC
2514311
SPRING HIX1583422
FUSE MDA-20 AMP
8370913
CONTROL HTM DIGITAL
6532214
MICROSWITCH ASSY318231
5
RELAY SS 50A 3-32VDC INPUT
658971
7
PLATEN, 16x20 HEAT201001018
ROCKER SWITCH
6843819
ALUMINUM HANDLE PIECE
6101014110
ALUMINUM HANDLE PIECE
6101013211
ROCKER SWITCH
94684112
6
3
1
2
4
5
7
8
8
12
9
11
10
11
25
83710
2
UNPACKING / INSTALLATION
Please read this manual in its entirety before operating
your press.
UNPACKING
Remember to save all packing materials - including any crating,
boxes, liners and boards. You may need these for shipping your
machine or should a repair be necessary in the future.
INSPECTION
Inspect your machine for hidden shipping damage. Contact the
delivery company immediately, should you find damage.
INST ALLATION
the press. Align legs with holes in top of cart and bolts (supplied)
fasten to cart. You will need a 9/16 wrench.
1. Lift press from box and place on cart, if you purchased one with
the bottom of the legs.
2. If press is to be placed on counter top stick plastic end caps on
3. Plug the press into a standard single phase, 220 volt.
Loading...