HIX DXM-SS-CP Installation Manual

SM

FOR

The Start Of A Great Pizza!

Call 1-800-835-0606

MODELS

DXM-SS-CP

OWNER’S MANUAL

16”x20” / 15”x15” Air Automatic Heat Transfer Machines

or Visit www.doughxpress.com

BEFORE warranty repair you MUST get Prior Authorization:

For Customer Service, Call [phone]

Unpacking / Inspection / Installation ......................................................... 2

Specifications ............................................................................................ 2

Operation ................................................................................................... 3

Cleaning / Maintenance ............................................................................ 3

Warranty ..................................................................................................... 4

CONTENTS

Warranty will be voided otherwise.

BEFORE warranty repair you MUST get

Prior Authorization: Call 1-800-835-0606

WARRANTY

Our system will automatically register the equipment on the date it was shipped. If the

NOTICE

equipment was not purchased directly from HIX, but through a distributor (either domestic

or foreign), please keep a copy of their sales invoice showing the serial number and date

it was sold/shipped to you with this warranty. In this case, we will use the distributor’s

invoice date as the beginning warranty date. STAPLE A COPY OF YOUR RECEIPT TO

THIS WARRANTY and keep in a safe place to provide verification of your warranty

should a problem occur. Thank you.

Please fill in the following information and attach a copy of your receipt for your records.

Date Purchased: _______________________ From:_____________________________

Model #: ______________________________ Serial #:___________________________

This warranty applies to equipment manufactured by the HIX Corporation (HIX),

Pittsburg, Kansas, U.S.A. HIX warrants to the original purchaser its Dough, Tortilla and

In the event of a defect, HIX, at its option, will repair, replace or substitute the defective

Poultry Presses against defects in workmanship and material, except for wear and tear

for a period of “One Year” from the date of purchase. All dough press carts, compres-

sors, and accessories are warranted for 90 days from the date of purchase.

This warranty does not cover normal wear and tear, damages due to accident, misuse/

item at no cost during this period subject to the limitations of insurance and shipping costs

stated below.

abuse, alterations or damage due to neglect or lack of proper lubrication or maintenance.

HIX shall not be responsible for repairs or alterations made by any person without the

In the case of a problem with the equipment identified herein, HIX Corporation should be

prior written authorization by HIX. This warranty is the sole and exclusive warranty of

HIX and no person, agent, distributor, or dealer of HIX is authorized to change, amend or

modify the terms set forth herein, in whole or in part.

contacted during regular business hours to discuss the problem and verify an existing

warranty. HIX personnel will assist the customer to correct any problems which can be

corrected through operation or maintenance instructions, simple mechanical adjustments,

or replacement of parts. In the event the problem cannot be corrected by phone, and

upon the issuance of a return authorization by HIX, the equipment shall be returned to HIX

or an authorized service representative. All insurance and shipment/freight costs are

This expressed warranty is given in lieu of any and all other warranties, whether

solely the responsibility of the customer, and not that of HIX, and HIX shall not be

responsible for improper handling or damage in transit. HIX customer service personnel

may be contacted for complete return authorization and reconditioning information.

In no event shall HIX’s liability for breach of warranty extend beyond the obligation to

expressed or implied, including but not limited to those of merchantability and fitness for a

particular purpose, and constitutes the only warranty made by HIX Corporation.

This warranty gives you specific legal rights and you may also have other rights which

repair or replace the nonconforming goods. HIX shall not be liable for any other damages,

either incidental or consequential, or the action as brought in contract, negligence or

otherwise.

vary from state to state.

[phone] • Fax: [phone]

1201 E. 27th Terrace • Pittsburg, KS 66762 • U.S.A.

E-Mail: [e-mail] • Website: www.doughxpress.com

©2007 HIX Corp. 4 CHP073107

OPERATION

3

machine as indicated below.

Thickness Control Knob

1. To set the dough thickness, turn the dial on the top of the

for thinner until you have the thickness you desire.

CAUTION: DO NOT OPERATE THIS PRESS WITH ANY

OTHER PERSON(S) / HAND(S) NEAR YOU OR THE

PRESS. SERIOUS INJURY COULD RESULT.

For DXM-SS-CP Manual (Non-Air): Pull down the handle

all the way, applying pressure, until it stops. Raise the handle

all the way up.

• Using the thickness control knob, turn right for thicker or left

• Rotate the lower platen out and remove your flattened product.

CLEANING / MAINTENANCE

CLEANING PTFE COATED HEAT PLATENS

You may clean the PTFE coated platens with a mild soap and

warm water. Use a soft cloth or sponge. Do not use steel wool,

scrubbies, kitchen cleansers, or other abrasives.

CLEANING OUTSIDE SURFACES OF MACHINE

Use a mild soap and warm water with a soft cloth or sponge.

Do not use steel wool, kitchen cleansers, or other abrasives.

2

UNPACKING / INSTALLATION

Please read this manual in its entirety before operating

your press.

UNPACKING

Remember to save all packing materials - including any crating,

boxes, liners and boards. You may need these for shipping your

machine or should a repair be necessary in the future.

INSPECTION

Inspect your machine for hidden shipping damage. Contact the

delivery company immediately, should you find damage.

INSTALLATION

Remove from box (Keep box just in case you need to return). Team

lift machine is very heavy.

SPECIFICATIONS

Dimensions

PRESS SPECIFICATIONS

Call 1-800-835-0606 Warranty will be voided otherwise.

BEFORE warranty repair you MUST get Prior Authorization:

DXM: 22-1/2” wide x 31-3/8” high x 30-7/8” deep.