HIVE LIGHTING Wasp 100-C User Manual

™

WASP 100-C

USER MANUAL

™

WELCOME!

And thank you for your purchase of the
Wasp 100-C™. The Wasp 100-C™ is an
Omni-Color LED luminaire from Hive
Lighting designed for use in permanent,
semi-permanent and mobile lighting
applications. Combining energy efficient
LEDs with our Perfect S.H.O.T. controls
we hope you find the Wasp 100-C™ to be
the perfect instrument for any lighting
application. We hope this manual serves
as a helpful companion to your new
light and answers all the questions you
may have, but please do not hesitate to
take advantage of our website and tech
support services.

Sincerely,

Hive Lighting

page 1

Quickstart Guide

GETTING A PERFECTLY LIT SHOT IN JUST 3 STEPS

1) Plug In and Power On
(Select Local Control)

2) Pick your S.H.O.T.
(Saturation, Hue, Output,
color Temperature)

3) Shoot!

page 2

Table of Contents

Welcome! 1
Quick Start 2
Specifications 5
Safety Information 7
Safety Warnings & Precautions 7
Safety Guidelines 7
FCC Information 9
Caring for your Wasp 100-C™ 9
Tips & Troubleshooting 10
Product Overview 11
Components & Included Accessories 11
Control Panel Features 12
Getting Started 13
Mounting The Light 13
Tilting (Vertical Adjustment) 13
Panning (Horizontal Adjustment) 14
Switching Lenses 14
Attaching the Barndoors 15
Removing the Reflector 15
Power 17
AC/DC Adapter (Included) 17
Battery (Sold separately) 17
Firmware Updates 18
Perfect S.H.O.T.™ Controls 18
Local Control 19
DMX Mode Instructions 20
App Control (Via Bluetooth) 22

page 3

Menu Tables 23
Policies 25
Product Modification Warning 25
Limited Warranty 25
Returning an Item Under Warranty for Repair 26
Refund Policy 28
Freight Policy 30

page 4

140mm

5.5”

117mm

4.6”

32mm

1.25”

201mm

7.90”

100mm

3.92”

199mm

7.85”

25mm

1.00”

140mm

5.50”

191mm

7.50”

202mm

7.95”

103mm

4.05”

218mm

8.60”

8mm

.31”

6mm

.24”

140mm

5.51”

135mm

5.30”

page 5

Specifications

• Lens type: HDP

• Optical System:
Omni-Color LED

• Lens Diameter: 5”

• Weight: 5lbs

• Mounting: 16 mm
receiver (“Baby” 5/8
inch receiver)

• Power Supply
Range: 12-34V DC

• Power Consumption:
85W

• DC Power
Connection:
4-pin XLR

• White Light: 1650K –
8000K Continuously
Variable Correlated
Color Temperature

• Colored Light: Full
360 degree color
wheel Hue and
Saturation control

• Color Temperature
Tolerance: +/- 100K

• Dimming: 0 – 100%

• Control Options: 5-Pin
DMX In and Out, In­Unit, app via bluetooth

• Data Input: USB

• Housing Color: Black

• Ambient Temperature
Operation: -35 °C to
40 °C

• Estimated LED
Lifetime: 50,000 Hours

page 6

Safety Information

SAFETY WARNINGS & PRECAUTIONS

• WARNING: Risk of Electric Shock! The Wasp

100-C™ is a lighting product powered by sufficient
electricity to cause harm to the human body. Do
not install or operate fixture while standing in
water or underwater. Failure to observe this safety
information or to ignore common sense may cause
serious injury or even death.

• CAUTION: High beam intensity! Do not look
directly into the light beam for an extended period.
No UV or IR is emitted at any time from this fixture.

• CAUTION: Devices and accessories must
always be properly secured against fall when
mounted above floor level. Always observe

common and local safety regulations.

GENERAL SAFETY GUIDELINES

• Defective components to the unit, attached
cables or electronic devices connected to it must
not be used. If you suspect there is damage to the
product’s internal components, do not open the
housing. Doing so will void all warranties.

page 7

• Do not operate the light if you see that any cables
or devices that light is connected to have been
damaged.

• Product complies with DMX512 standards only.
Light is not compliant with RDM standards and
may not be operated with aid of an AC dimming
system.

• Do not sit or submerge product in water.

• ONLY use DC Power source within acceptable
voltage range of 12-34V DC - check that power
source complies before handling. It is strongly
recommended that the user powers light with
either the provided AC/DC adapter or a Hive­approved battery adapter.

• Do not position or mount the product
near open flames.

• Unobstructed airflow is required for
effective cooling. Allow minimum of one
inch clearance around air vents for proper
ventilation.

page 8

FCC INFORMATION

This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference
when the equipment is operated in a commercial
environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may
cause harmful interference to radio communications.

Caring for your Wasp 100-C™

MAINTENANCE

Help prevent damage and prolong the life of your equipment
by following these suggestions:

• With the unit unplugged, lightly clean the outer
metal housing with a soft, clean towel and
compressed air.

• Clean the control panel with cotton swabs wetted
with isopropyl alcohol.

• Clean the reflector and lenses with a dry chamois
or compressed air. Avoid touching any of these
components with your fingers directly.

• Do not operate product when operating
environment is in excess of 50 °C.

page 9