hittite HMC362 User Manual
查询HMC362供应商
3
MICROWAVE CORPORATION
v02.1202
Typical Applications
Prescaler for DC to X Band PLL Applications:
• Satellite Communication Systems
• Fiber Optic
• Pt-Pt and Pt-MPt Radios
• VSAT
Functional Diagram
HMC362
GaAs HBT MMIC
DIVIDE-BY-4, DC - 11.0 GHz
Features
Ultra Low SSB Phase Noise: -149 dBc/Hz
Wide Bandwidth
Output Power: -6 dBm
Single DC Supply: +5V
Small Size: 0.686 mm x 1.295 mm
General Description
The HMC362 is a low noise Divide-by-4 Static
Divider with InGaP GaAs HBT technology that
has a small size of 0.686 mm x 1.295 mm. This
device operates from DC (with a square wave
input) to 11 GHz input frequency with a single
+5.0V DC supply. The low additive SSB phase
noise of -149 dBc/Hz at 100 kHz offset helps the
user maintain good system noise performance.
Electrical Specifi cations, T
FREQ. DIVIDERS - CHIP
Parameter Conditions Min. Typ. Max. Units
Maximum Input Frequency 11 12 GHz
Minimum Input Frequency Sine Wave Input. [1] 0.2 0.5 GHz
Input Power Range Fin = 1 to 8 GHz -15 >-20 +10 dBm
Output Power [2] Fin = 11 GHz -9 -6 dBm
Reverse Leakage Both RF Outputs Terminated 40 dB
SSB Phase Noise (100 kHz offset) Pin = 0 dBm, Fin = 6 GHz -149 dBc/Hz
Output Transition Time Pin = 0 dBm, Fout = 882 MHz 100 ps
Supply Current (Icc) [2] 68 mA
1. Divider will operate down to DC for square-wave input signal.
2. When operated in low power mode (pin 10 fl oating).
= +25° C, 50 Ohm System,Vcc= 5V
A
Fin = 8 to 11 GHz -10 >-15 +2 dBm
3 - 8
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
v02.1202
HMC362
MICROWAVE CORPORATION
GaAs HBT MMIC
DIVIDE-BY-4, DC - 11.0 GHz
GaAs MMIC SUB-HARMONICALLY PUMPED MIXER 17 - 25 GHz
Input Sensitivity Window, T= 25 °C Input Sensitivity Window vs. Temperature
20
10
0
Recommended
Operating Window
-10
INPUT POWER (dBm)
-20
-30
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
INPUT FREQUENCY (GHz)
Output Power vs. Temperature
0
-1
-2
-3
-4
-5
-6
-7
OUTPUT POWER (dBm)
-8
-9
-10
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
INPUT FREQUENCY (GHz)
+25 C
+85 C
-55 C
20
10
0
-10
INPUT POWER (dBm)
-20
-30
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Min Pin +25 C
Max Pin +25 C
Min Pin +85 C
Max Pin +85 C
Min Pin -55 C
Max Pin -55 C
INPUT FREQUENCY (GHz)
SSB Phase Noise
Performance, Pin= 0 dBm, T= 25 °C
0
-20
-40
-60
-80
-100
-120
SSB PHASE NOISE (dBc/Hz)
-140
-160
2
10
3
10
4
10
OFFSET FREQUENCY (Hz)
5
10
3
FREQ. DIVIDERS - CHIP
6
10
7
10
Output Harmonic
Content, Pin= 0 dBm, T= 25 °C
0
-10
-20
-30
OUTPUT LEVEL (dBm)
-40
-50
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
INPUT FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Reverse Leakage, Pin= 0 dBm, T= 25 °C
Pfeedthru
2nd Harmonic
3rd Harmonic
Order Online at www.hittite.com
0
-10
-20
-30
-40
-50
POWER LEVEL (dBm)
-60
-70
Both Output Ports Terminated
One Output Port Terminated
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
INPUT FREQUENCY (GHz)
3 - 9
Loading...