Hitron HDGI-N31NPV2S9D Instruction Manual

2.MATERIAL:

3.COLOR: BLACK

148+/-5)mm

Full HD

Dome Camera

3-AX IS INFR ARED- LED

PLAS TIC DOM E CAMER A

HDGI-N31NPV2S9D/NoBrand

PRODUCTION RELEASE & REVISION
REV

DESCRIPT’N/BUYER

DWG No

PARTS No.

BY

CHK

DATE

TITLE

SIZE REV.

SCALE

MATERIAL

UNLESS OTHERWISE SPECIFIED

ALL DIMENSIONS ARE IN MM.

- TOLERANCE
LABEL +/- 3
MANUAL +/- 5
GUIDE +/- 5

COLOR

DATE

DRAWN

CHKED

APPROVALS

PARTS LIST

DESCRIPTION/MATERIAL

ITEM QTY

A4

DO NOT SCALE

2

2

3

전자

105(+/-5)mm

J.Y.LIU

M.J.KWON

50303906

A

강영구

M.J.KWON

15-0 4-15

15-0 4-15

15-0 4-15

K.H.JUNG

Instruction Manual

15-0 4-15

15-0 4-15

50303906

Full HD

Dome Camera

Instruction Manual

2

FCC COMPLIANCE STATEMENT

CE COMPLIANCE STATEMENT

CAUTION : Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

WARNING : This is a Class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate measures.

FCC INFORMATION : This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5.. Do not block any ventilat ion openings. Install in accord ance with the manufacturer`s
instructions.

6. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

7. Only use attachments/accessories specified by the manufacturer.

8. Use only with the ca rt, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/ apparatus combination to avoid
injury from tip-over.

9. CAUTION - THESE SERVICING IN STRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN
THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU
ARE QUALIFIED TO DO SO.

10. Use satisfy clause 2.5 of IEC60950-1/UL 60950-1 or Certified/Listed Class 2
power source only.

11. Indoor use only.

EXPLANATION OF GRAPHICAL SYMBOLS

IMPORTANT SAFETY INSTRUCTIONS

3

4

5

6

7

8

10

21

20

VIDEO OUT CHECK

CONTENTS & PACKAGE

6

BASE INSTALLATION

8

8

LENS ADJUSTMENT

DC AUTO IRIS LENS

5

The 1/2.8" 2.4M HD CMOS camera, especially for closed circuit television
CCTV and
security surveillance application.

1/2.8"

30 EA, 850nm IR LED

Auto and manual white balance modes (ATW/AWC/Manual/AWB)

3

HSBLC

DWDR

4

BLC (Back-light compensation)

25/30 fps @ 1080p

30

6

(IR Mod el 5 Watts)

Switch Cable : -Green & Black : open -> AHD signal BNC output

-Green & Black : short -> CVBS signal BNC output

BNC connector used to connect the camera to a DVR, etc.