PRODUCTION RELEASE & REVISION
REV
DESCRIPT'N/BUYER
DWG No
PARTS No.
BY
CHK
DATE
TITLE
SIZE REV.
SCALE
MATERIAL
UNLESS OTHERWISE SPECIFIED
ALL DIMENSIONS ARE IN MM.
- TOLERANCE
LABEL +/- 3
MANUAL +/- 5
GUIDE +/- 5
COLOR
DATE
DRAWN
CHKED
APPROVALS
PARTS LIST
DESCRIPTION/MATERIAL
ITEM QTY
A4
DO NOT SCALE
2
A
Manual Instruction
50303866
NOTES
1.MODEL:HCGI-P61DN(P)FxW2/ NO BRNAD
2.MATERIAL:
2
모조지100g/m WHITE
3.COLOR: BLACK
4.SIZE:105(+/-5)mm x 148(+/-5)mm
5.LABEL: -------------
3
전자
장석원
105(+/-5)mm
148+/-5)mm
J.Y.LIU
M.J.KWON
K.H.JUNG
A INITIAL ------------------- 50303866 J.Y.LIU M.J.KWON 15-04-13
15-04-13
15-04-13
15-04-13
15-04-13
3-AXIS INFRARED - LED PLASTIC
DOME CAMERA
WDR Super High
Resolution
Day & Night
Camera
3-AXIS INFRARED - LED PLASTIC
DOME CAMERA
WDR Super High
Resolution
Day & Night
Camera
2
FCC COMPLIANCE STATEMENT
CE COMPLIANCE STATEMENT
CAUTION : Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
WARNING : This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.
FCC INFORMATION : This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5.. Do not block any ventilat ion openings. Install in accord ance with the manufacturer`s
instructions.
6. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
7. Only use attachments/accessories specified by the manufacturer.
8. Use only with the ca rt, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/ apparatus combination to avoid
injury from tip-over.
9. CAUTION - THESE SERVICING IN STRUCTIONS ARE FOR USE BY
QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN
THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU
ARE QUALIFIED TO DO SO.
10. Use satisfy clause 2.5 of IEC60950-1/UL 60950-1 or Certified/Listed Class 2
power source only.
11. Indoor use only.
EXPLANATION OF GRAPHICAL SYMBOLS
IMPORTANT SAFETY INSTRUCTIONS
3
LIMITATION OF LIABILITY
THE INFORMATION IN THIS PUBLICATION IS BELIEVED TO BE ACCURATE IN ALL
RESPECTS, HOWEVER, WE CANNOT ASSUME RESPONSIBILITY FOR ANY
CONSEQUENCES RESULTING FROM THE USE THEREOF. THE INFORMATION
CONTAINED HEREIN IS SUBJECT TO CHANGE WITHOUT NOTICE. REVISIONS OR NEW
EDITIONS TO THIS PUBLICATION MAY BE ISSUED TO INCORPORATE SUCH CHANGES
TABLE OF CONTENTS
4
INTRODUCTION 5
CONNECTIONS 6
Heater/RubberWashers/Desi-Pack 7
ADVANCED MENU 11
SPECIFICATIONS 16
EXTERNAL DIMENSION 17
VIDEO OUT CHECK
15
SETUP MENU 8
14
SWITCHS SETTING
The camera provides a high-quality image using SONY Wide Dynamic 1/3”
Super-HADII PS 960H CCD and digital signal processing LSI chips.
1/3" Super-HADII PS 960H CCD
Wide Dynamic Range (~x512) -Double shutter+ATR-EX2
Super high-resolution of 720TV lines
Digital Noise Reduction- 2D,3D
Day & Night(Auto, Day, Night)
Sens-Up (~x256)
Various Detection Methods (zone detection, motion trace, face trace, mine area,
absent detection, cross object counting, entrance counting)
Intelligent scene recognition - Provide the best image automatically for every scene
Privacy Mask or Mosaic (MAX. 15 area /4-point polygonal/transparency)
E-Zoom
White pixel detection and compensation
Digital Effect-FLIP (H/V reverse, inverse)
Defog(Auto) - Detects foggy condition automatically and
provides high contrast picture
IR Optimizer
Coaxial communication (Coaxitron by Pelco)
Operates in 12VDC
5
6
1. Lens : 2.5 ~ 12mm
2. Power : DC12V input: Red (+)
*
If using DC 12V power, use a power supply capable of supplying 5 Watts.
3. Video: BNC (Yellow) connector
4. Audio : BNC (White) connector(Option)
BOTTOM
1
TOP
2
3
4
REMINDER:
Never aim the camera
directly into the sun.
(Option)
Heater Kit
Power Supply 12V DC
Power Consumption 10W
o o
Heater ON at 41 F (5 C)
o o
Heater OFF at 59 F (15 C)
HEATER (IF APPLICABLE)
HEATER
Power Cable
(DC 12V)
Rubber Washers(Waterproof)
Mount position
TOP CASE
BOTTOM CASE
Accessories:
Torx wrench(4)
Rubber washers(4) M4 plastic anchors(4)
M4x20 pan-head screws(4)
Desiccant pack
Recommended
location
Desiccant Pack
Accessories:
Poly Bag
Desiccant Pack
Double-Sided Tape
Top Case
7
<SETUP MENU>
The six modes can be selected.
CUSTOM /FULL AUTO / INDOOR / OUTDOOR / BACK LIGHT / ITS
CUSTOM
This mode turns off the auto scene recognition. All functions can be set and adjusted manually
FULL AUTO
This mode supports various shooting scenes. It is not specialized to any particular scene, so it
allows average shooting in any situation.
INDOOR
This mode is specialized to indoor scenes, such as indoor shop surveillance. It allows natural
shooting with high contrast.
OUTDOOR
This mode is specialized to outdoor scenes, such as road surveillance. It features high contrast
and resolution, and allows shooting with high visibility even in foggy outdoor conditions.
BACKLIGHT
This mode is specialized to scenes that mix indoor and outdoor conditions, such as entranceway
surveillance.
It allows shooting with high visibility and a high dynamic range, even under backlighting
conditions.
ITS
This mode is specialized to scenes where moving subjects enter the picture, such as traffic
surveillance scenes. It allows high-resolution shooting of moving subjects with low blur.
1. Scene Select function
2. Picture Adjust function
This Camera system provide functions that enable users to easily adjust the image quality to suit
the image output device used.
Brightness - Adjusts the brightness
Contrast - Adjusts the image contrast (light and shade differences).
Sharpness - Adjusts the apparent resolution
Hue - Adjusts the hue
Color Gain - Adjusts the intensity (brilliance) of the colors
3. EZOOM (Electronic Zoom)
EZoom - ON / OFF
MAG - Magnification rate = ZOOM (0~255)
PAN - Horizontal position settings
TILT -Vertical position settings
4. DIS (Digital Image Stabilizer)
Digital Image Stabilizer (DIS) function internally detects shaking of the image due to camera
shaking, and performs digital compensation processing inside the DSP to suppress this shaking
and stabilize the image output.
8
5. PRIVACY MASK
The mask function hides one or more areas which the user does not want to be displayed on the
screen. This SET is capable of outputting 15 masks to the display. Each of these 15 masks can be
set with its own display area, color, darkness and mosaic processing.
AREA SEL - Select mask area (1-15).
DISPLAY - Mask to ON or OFF
POSITION
COLOR - Sets the color blend:
RED/ GREEN/ BLUE/ YELLOW/ CYAN/ MAGENTA/ WHITE/ BLACK
TRANSP - Sets the brightness blend ratio: 0%, /50%/75%/100%
MOSAIC - Sets the mosaic to ON or OFF.
6. MOTION DET (Motion Detection)
By using the motion detection function, it is possible to create surveillance cameras which are
capable of detecting moving objects. The motion detection function identifies motion and outputs
motion information when the difference in brightness exceeds a specific level between frames(2VD).
DETECT SENSE
Sets the motion detection threshold.
INTERVAL
Sets the MD detection interval. Subjects are detected when an interval exceeding the set number
of fields has elapsed from the previous motion detection.
BLOCK DISP
Motion detection result frame display selection
Outputs the results of the motion detected in each block
MASK AREA
MD (Motion Detection) setting menu, for setting the no-detection area.
The active point (MASK AREA 1~96) is displayed. Move the point with 4-arrow keys. Press
[ENTER] key is to finish edit point. (No-detection area)
MONITOR AREA
Sets the position of the monitoring frames in pixel or line increments
7. SYS SETTING
7-1. SYNC MODE
External synchronization is a function with synchronization of the phase between an output video
signal and an external reference signal. Use line lock mode to minimize color rolling.
INT
In this mode, synchronization is not implemented with a multiple number of cameras.
7-1. LENS
Manual Select the Lens Manual type
7-2. FLIP
Select digital Flip / Rotate state
Off / V(Top / bottom reversal) / H(Left / right reversal) / HV(Rotation by 180 degrees)
7-3. LCD / CRT
Seclect Monitor mode.
9
SAVE Save the settings (settings are saved)
NOT SAVE Exit
Menu without saving SAVE : Exit menu without saving.
CANCEL Changes (restore settings to those selected when the menu was displayed)
BACK Return to previous menu
RETURN Return to page on the hierarchical level immediately before.
8. EXIT-MENU
CAMERA ID
ABCDEFGHIJKLMNOPQRSTUV
W X Y Z0 1 2 3 4 5 6 78 9 ! ” # $ % &(
)_’,￥ :;<=>?@￦ ^*↑ ↓ ← →
CLR POS
RETURN
CHR1
Select CHR1 is displayed Table of input Characters.
CHR2
Select CHR2 is displayed Table of input White Bar.
CLR
Select CLR to insert a space.
POS
Select POS to return to the live view screen to adjust the location of the camera ID title display.
(If it is moved too much to the right side or down, the ID might move off the screen.)
7-4. CAMERA ID
Sets the camera ID to ON or OFF. the CAMERA ID SETUP
screen can be displayed.
A title of 64 characters per line can be configured.
Use the joystick to navigate the cursor.
Pushing centrally on the joystick will allow selection of that
character.
The arrows at the bottom allow you to move the cursor without
changing the character.
CAMERA ID SETUP
11. MAINTENANCE
9. LANGUAGE
10. VERSION
LANGUAGE select between:
English, Spanish, Russian, Portuguese, German, French, Japanese.
Camera version information.
W.PIX MASK
White pixel compensation menu. The white pixel detection and compensation function can
automatically detect and compensate up to 64 white pixels.(Static detection)
AUTO
This mode performs the optimal operation for detecting white pixels, and automatically detects the
white pixels of CCD image sensors.
LEVEL1 - Normal Defect
The threshold adjustment of the white pixel detection
LEVEL2 - Large Defect
The threshold adjustment of the very large white pixel detection
AUTO Press Enter button to turn White Pixel Compensation mode Start.
RUN Press Enter button to start White Pixel Compensation start.
RUNNING Process to find white pixel.
SBC SUCCESS Process ended.
CHR1 CHR2
10
MANUAL
- REGISTRATION
Manual white pixel defect information registration
1) Press the Enter button to turn White pixel compensation position marker display.
2) Use the Arrow buttons align the marker with the position of the white pixel.
3) Press the Enter button to exit and Press the EXIT button to save.
Note : In manual detection mode, the detection data is always treated as a very large white
pixel. Up to 64 white pixel compensation.
- NEXT REGISTRATION
Continue with manual white pixel compensation settings
- REG.POINT
Selects whether to display the registered White or Black pixels
- CURSOR COLOR
Cursor color during manual defect registration
- BLINK
Cursor display blinking during manual defect registration
- REG.NUMBER
Registered white pixel defect count display
- DATA CLEAR
Initializes the white pixel compensation information
Select erasing white pixel function to press Enter button (YES)
<ADVANCED MENU>
AEME (Auto Exposure/Manual Exposure) selection,(shutter/AGC).
This control adjusts the amount of exposure using the shutter speed.
12-1. AUTO
Select Auto to have exposure control performed automatically.
AE LEVEL (Auto Exposure Level)
Set the AE level using the sliding scale. Set exposure control so that the output level (evaluation
value) is the target brightness level (AE reference level). This control is called AE gain control.
AGC MAX
Set the AGC (Auto Gain Control) maximum setting to adjust brightness.
This control adjust the exposure amount.
SENS UP (Slow Shutter)
Adjust the proper brightness in Low-light conditions. Select the setting for slow shutter speed to
allow extra light into the camera (AUTO and OFF). Select Auto to have the camera automatically
make this adjustment. Select Off to disable this function.
12-2. MANUAL
Select Manual to have exposure control performed manually.
SHUTTER
Select the shutter speed.
AGC MAX
Set the maximum AGC (Automatic Gain Control, DB) to adjust brightness.
12-3. FIX
Exposure control is stopped. AE does not track even if the subject brightness changes.
SHUTTER
Select the shutter speed.
AGC
Set the AGC (Automatic Gain Control, DB) to adjust brightness.
12. SHUTTER / AGC
11
USER2
The USER2 functions set the White Balance gain in accordance with preset values (5800ºK). WB
control does not track even if the subject color temperature changes.
Use the sliding scale to adjust red or blue gain.
R (R-GAIN): Adjust R-GAIN value (0-255)
B(B-GAIN): Adjust B-GAIN value (0-255)
MANUAL
Manual White Balance allows WB control to be performed manually. The configurable color
temperature setting range is 1500K to 15000K. Use the sliding scale to set the number of white
balance steps; the setting can be performed in 64 steps.
PUSH LOCK
PUSH LOCK sets the White Balance based on the current scene. The PUSH LOCK function first
transfers to PUSH mode and performs ATW operation and then transfers to HOLD mode when
complete.
15. HLC / BLC
HLC (Highlight Compensation)
HLC luminance signal processing is a function that suppresses or masks the luminance signal. It
reduces the load on watchers' eyes and enhances visibility impaired by strong light sources or
other factors by performing output while suppressing the brightness of high-brightness areas.
CLIP LEVEL HLC mask level
BLC (Backlight Compensation)
The BLC function provides compensation by increasing the brightness of the overall screen so
that subjects being shot with a loss of dark detail due to backlight will have just the right
brightness level.
14. WHITE BAL
Compensates for deviations in the white color caused by changes in the color temperature of the
light source so that the colors are reproduced correctly.
ATW - ATW mode (1800ºK ~10500ºK)
Performs indoor/outdoor identification, estimates the light source, and performs WB control
automatically.
SPEED Use the sliding scale to adjust the ATW speed (0-255);
255: fastest, 0: slowest
DELAY CNT Use the sliding scale to adjust the number of fields for operation to start (1-255).
When 1 is set, operation starts immediately.
ATW FRAME Use the sliding scale to adjust the frame expansion or contraction rate(1-255)
ENVIRONMENT Select from AUTO/INDOOR/SUNNY (outdoor)/SHADE(outdoor) environment.
Push
The PUSH function performs White Balance control automatically, rega rdless of the
indoor/outdoor and light source conditions. Compensation may be performed incorrectly since
this control is easily affected by deeply colored subjects.
USER1
The USER1 functions set the White Balance gain in accordance with preset values (3200ºK). WB
control does not track even if the subject color temperature changes.
Use the sliding scale to adjust red or blue gain.
R (R-GAIN): Adjust R-GAIN value (0-255)
B (B-GAIN): Adjust B-GAIN value (0-255)
13. FLK LESS
Select Flickerless function to be AUTO/ON/OFF.
MODE-When AUTO or ON selected:
GAIN CNTL Selects gain modulation ON.
SHUTTER FIX Selects flickerless shutter fix ON.
12
18-1 AUTO
Camera automatically switches between Day&Night modes according to the D>N & N>D levels.
BURST : Select B/W Burst On/Off
CNTL SIGNAL
Selection of brightness reference for identifying Day/Night Control Signal.
INT ILM levels
EXT1 external sensor inverting.
EXT2 external sensor non-inverting.
Ext : Camera switches between Day & Night modes according to the D/N EXT input.
(ILM level or GPI Cable)
18. DAY/NIGHT
Delay CNT : Adjust the judgment time for the transition between the Day and Night. (0-255).
DAY>NIGHT Level : Select switching level Day to Night (0-255).
NIGHT>DAY Level : Select switching level Night to Day (0-255)
Day : Camera stays in Day mode (Color)
Night : Camera stays in Night mode (B/W)
If, when the Night operation mode of the Day/Night function is established, the mode is used
together with an external infrared LED light source, excessive front lighting may be generated,
resulting in overexposure.
19-1. IR OPTIMIZER SETUP
MODE(IR Model only)
IR optimizer photometry mode selection
IR AREA
IR optimizer judgment area setting menu in spot photometry mode
LEVEL
IR optimizer intensity(0~12)
19. IR OPTIMIZER (OPTION)
CONTRAST(LOW/MID/HIGH) Contrast adjustment gain
CLEAR FACE(OFF/ LOW/MID/HIGH) High-frequency component adjustment gain
16.WDR/ATR-EX
ATR-EX(Extended)
The ATR function provides gradation compensation with the aim of improving visibility.
It compensates to the optimum gradation on the basis of the luminance information.
This function compresses the dynamic range while storing the contrast component of the subject.
Used to reduce image noise in order to improve the image quality of the camera.
It reduces the noise which is generated under low-light conditions and other high-gain states.
LEVEL Adjusts the NR (3D+2D) strength (0~6)
17. DNR
WDR(Wide Dynamic Range)-Option
When users shoot subjects which exceed the dynamic range of the CCD image sensor, parts of
the subjects suffer from loss of dark detail (blocked up shadows) or overexposure (blown out
highlights). The Wide Dynamic Range (WDR) function ensures that when images are shot under
conditions such as these, images free from loss of dark detail or overexposure are output.
13
Recommendation Controller can communicate with camera through the BNC port.
Recommendation controller
Coaxial Remote Controller : RM-1000
*NOTE Coaxial Communication (32 Bit)
VIDEO OUT CHECK
Joystick Switch Board
RIG HT
LEF T
UP
DOW N
CAM
MOD ULE
IR7 SEN
DC1 2V/VI DEO
20. DEFOG
Defoging function ON/OFF selection. The defog function raises the contrast to improve visibility.
For example, in foggy conditions, contrast is reduced and visibility drops. In such cases, enabling
the defog function prevents a drop in contrast. In addition to compensating for contrast,
compensation is also made for the saturation, edges, and 3D-NR moving body identification
threshold. The defog compensation strength can be set to three levels (Low, Mid, High) using the
Auto function.
21. ANTI CR (Anti color-rolling)
Anti color-rolling mode is valid when the AEME parameter is set to AE. When the parameter is set
to HOLD, the status of the previous field is maintained.
Users can select from the following anti color-rolling modes.
AUTO Anti color-rolling is automatically detect and compensate
ON Anti color-rolling is always compensate
OFF Anti color-rolling is not compensate
When the Auto anti color-rolling mode is selected, then the auto flickerless mode is turned on at
the same time.
14
Switch Settings
SWITCH
SETTING
LEFT
POSITION
(Recommended)
RIGHT
POSITION
SW101(Video Settings)
1
Mirror(Horizental)
Image inversion
NOTE: Mirror function is used
for back up camera position
STANDARD
MIRROR-Option
(No OSD Model only
corresponds)
2
IR LED
AUTO
OFF
3
Light
NOTE: Low setting provides
less “wash-out” in dark
conditions sensor
LOW
IR on @ 5Lux
IR off @ 10Lux
HIGH
IR on @ 10 Lux
IR off @ 15 Lux
4
IR Current
NOTE: Low intensity is
preferred for distances 5~10ft.
Use HIGH for distances
exceeding 10ft.
LOW
(54~56 mA)
HIGH
(80~82 mA)
SW103(Audio Settings)
1
Audio SelectONOFF
2
Audio Gain Control
HIGH
LOW
15
SPECIFICATIONS
Power source
Power consumption
Image sensor
Total number of pixels
Scanning frequency
Sync. system
Resolution
Min. illumination
Video output
Power input
Lens mount
15.734KHz(H)
59.94Hz(V)
Internal
720 TVL
0.8 Lux(Color), 0 lux(B/W at IR ON) @ F1.2, 50 IRE
More then 50dB (AGC off)
5559 - 02P(Molex) or DC Jack
Fixed mount
2.8 Watts / 0.23A (IR LED ON)
MODEL
S/N ratio
Auto Exposure
BLC
Day & Night
White Balance
Power
Lens
Connector
&
etc.
Video output
Operating Temperature
1.0 Vp-p (75 ohm, composite)
BNC(Yellow) connector
General
Operating humidity
0 ~ 96% (non-condensing)
F
U
N
C
T
I
O
N
Fixed (f=2.9, 3.6, 4.0, 6.0, 8.0, 12.0mm)
NTSC
PAL
15.625KHz(H)
50Hz(V)
IR LED / SENSOR
IR LED 11EA(850nm)
Photo Sensor 2EA
LED Lighting Distance
Max 10m
ON
OFF
WDR
ON
o o o o
]
-10 C ~ +50 C [14 F ~ 122 F
External Dimension
94(W) x 63(H) x 130(D) mm
Weight Unit / Shipping
0.85lbs (385g) / 1.23lbs (555g)
DEFOG
3.7(W) x 2.5(H) x 5.2(D) inch
Gain Control
ON
AUTO
AUTO
AUTO
Audio output(option)
BNC(White) connector
1/3" SONY CCD
1028(H)x508(V) 1028(H)x596(V)
Tact Switch, Coaxial Communication(32BIT)(Option)
16
94 130
130
63
17
50303 866A
Loading...